MRF2S-8S-DV-WH – VIVE MAESTRO DUAL VOLTAGE WIRELESS 8A SWITCH

MRF2S-8S-DV-WH – VIVE MAESTRO DUAL VOLTAGE WIRELESS 8A SWITCH

DESIGNED FOR USE WITH PERMANENTLY INSTALLED LIGHTING LOADS AND WITH FAN MOTOR LOADS UP TO 1/10 HP (3 A, 120 V~ ONLY) – BY LUTRON

  • Description
  • Specs
  • Please visit literite.com for our new store!
  • NON VERIFIED

Description

This is a Vive Maestro dual voltage wireless 8A switch; no neutral required. The Maestro Wireless solution incorporates Maestro Wireless load controls, wireless sensors, and wireless remote controls, which provide a system that delivers energy savings, convenience, and ease of installation. Maestro Wireless dimmers and switches use Lutron patented Clear Connect RF Technology, which enables wireless communication with Radio Powr Savr sensors and Pico remote controls for light control and general switched loads. These products are also compatible with the Vive hub which enables a simple setup process using a standard web browser on any Wi-Fi enabled phone, tablet or computer. It also enables control and monitoring of all Vive devices. The Vive hub can be added at any time and preserves existing system setup by extracting local programming from each device. For a complete list of features supported with the Vive hub, call Lite Rite Controls. Note for Replacement: MRF2S – the “S” model can replace the non-”S” model. Click here to see the Lutron Vive story.

HIGHLIGHTS:

  • The Vive Maestro dual voltage wireless 8A switch provides switching of multiple load types.
  • Lutron patented Clear Connect RF Technology works through walls and floors.
  • Incorporates advanced features such as fade ON/fade OFF, high-end trim, and rapid full-ON.
  • Controls include Front Accessible Service Switch (FASSTM) for safe lamp replacement.
  • Two-wire dimmers and switches available for retrofit applications.
  • Power failure memory: If power is interrupted, the control will return to its previously set level prior to interruption.

Ganging and Derating

When combining controls in the same wallbox, derating is required. See pdf spec sheet for more info.

Mixing Lamp Types

Mixing lamp types (using a combination of CFL/LED, and Incandescent/Halogen bulbs) and ganging with other dimmers or electronic switches may reduce maximum wattage, as shown. Example: If fins from one side of dimmer are removed and you have two 24 W bulbs installed (total CFL Wattage = 48 W), you may add up to 300 W of incandescent or halogen lighting.

PDF BUTTONVive Maestro Wireless Dimmers and Switches Spec Sheet

Specifications:

  • 120/277VAC at 50/60 Hz
  • 50 W min load

NON VERIFIED CONTENT