RH-253 – DECORATOR SINGLE POLE MOMENTARY SWITCH
RH-253 SWITCHES PROVIDE ECONOMICAL CONTROL FOR THREE-, FOUR- AND MULTI-WAY LIGHTING APPLICATIONS. USE RH-253S WHERE ADDITIONAL SENSOR COVERAGE IS NOT NEEDED, SUCH AS IN A JACK AND JILL BATHROOM. – BY WATTSTOPPER
- Description
- SPECS
- MANUAL
- Please visit literite.com for our new store!
- NON VERIFIED
Description
This is the decorator single pole momentary switch. The RH-253 is a single pole momentary switch for on/off control. It is typically used with multi-way occupancy and vacancy sensors for applications requiring multiple switch locations. Users tap the switch to turn connected lighting on or off. The RH-253 provides true multi-way on/off control when connected to one or more CH-250, CU-250, CD-250, RH-250 or RD-250 wall switch sensors. Check out Wattstopper DLM products here.
- Replaces three-way or four-way switches when used with multi-way sensors
- Works with CH-250, CU-250 and RH-250 sensors and CD-250 and RD-250 sensor dimmers.
- Low-profile styling
- Choice of five decorator colors
- Compatible with decorator wall plates
WS-Cutsheet-RH-253-Decorator-Single-Pole
- 120 VAC, 60 Hz
- 2.67” x 1.73” x 1.77” (68mm x 44mm x 45mm) L x W x D
- Operating conditions: 32-131°F (0-55°C), 95% RH, noncondensing; for indoor use only
- UL and cUL listed
- Five-year warranty
NON VERIFIED CONTENT
Related Products
-
WattStopper LMRC-100 SERIES DIGITAL SWITCHING ROOM CONTROLLER
ROOM CONTROLLERS ARE IDEAL FOR SINGLE OR MULTIPLE ZONE ON/OFF LIGHTING CONTROL APPLICATIONS. THE LMRC-101 HELPS SPECIFIERS COMPLY WITH BASIC ASHRAE 90.1 REQUIREMENTS, WHILE THE LMRC-102 IS DESIGNED FOR BI-LEVEL SWITCHING IN IECC, EPAct, CALIFORNIA TITLE 24 OR LEED PROJECTS BY WATTSTOPPER
-
LMPL-101 – DIGITAL PLUG LOAD ROOM CONTROLLER
CONTROLLER ENSURES THAT ENERGY IS NOT WASTED WHEN PORTABLE LOADS ARE PLUGGED IN. IDEAL FOR USE WITH NON-ESSENTIAL EQUIPMENT IN PRIVATE AND OPEN OFFICES, LUNCH ROOMS AND BREAK ROOMS – BY WATTSTOPPER
-
WattStopper LMSW-100 SERIES DIGITAL WALL SWITCH
RECOMMENDED FOR VIRTUALLY ALL APPLICATIONS, INCLUDING OFFICES, CONFERENCE ROOMS AND CLASSROOMS. IDEAL FOR ANY AREA WHERE MANUAL ON/OFF CONTROL IS DESIRED. PERFECT FOR APPLICATIONS REQUIRING MULTI-WAY CONTROL – BY WATTSTOPPER
-
WattStopper LMDC-100 DUAL TECHNOLOGY CEILING MOUNT OCCUPANCY SENSOR
DIGITAL DUAL TECHNOLOGY CEILING MOUNT OCCUPANCY SENSOR W/ PASSIVE INFRARED (PIR) AND ULTRASONIC TECHNOLOGIES TO ACHIEVE PRECISE OCCUPANCY SENSING FOR ENERGY EFFICIENT CONTROL OF LIGHTING AND PLUG LOADS – BY WATTSTOPPER
-
LMBC-300 – 2 NETWORK BRIDGE MODULE DLM
THE LMBC-300 NETWORK BRIDGE IS IDEAL FOR PROJECTS THAT REQUIRE CENTRALIZED MONITORING, CONTROL OR CONFIGURATION – BY WATTSTOPPER
-
LMPC-100 – PIR CEILING MOUNT OCCUPANCY SENSOR
THE LMPC-100 SENSORS, WITH DIFFERENT LENSES FOR DIFFERENT SPACES, ARE IDEAL FOR HIGH AND LOW CEILING AREAS – BY WATTSTOPPER
-
LMLS MB – PHOTOSENSOR MOUNTING BRACKET
DIGITAL LIGHTING MANAGEMENT (DLM) PHOTOSENSOR MOUNTING BRACKETS
-
MSCLV-1000M-XX – MAESTRO MAGNETIC LOW-VOLTAGE DIMMER
MAESTRO 120V 1000VA (800W) MAGNETIC LOW-VOLTAGE DIMMER / MULTI-LOCATION / SINGLE-POLE DIMMER SWITCH – BY LUTRON
-
PICO-SM-KIT – SCREW-MOUNT KIT FOR PICO® WIRELESS CONTROL
KIT INCLUDES SPECIAL SCREWS TO BE USED FOR MORE PERMANENT MOUNTING AND / OR FOR NON-SMOOTH SURFACES – BY LUTRON
-
WattStopper CS-350-N PIR Dual Relay Sensor
THE CS-350-N PIR DUAL RELAY VACANCY SENSOR IS APPROPRIATE ANYWHERE THAT MANUALLY ACTIVATED CONTROL OF TWO LOADS FROM A SINGLE LOCATION IS DESIRED (E.G. IN A BATHROOM TO CONTROL THE LIGHT AND EXHAUST FAN). IT IS ALSO A SUITABLE DEVICE FOR LIGHT COMMERCIAL APPLICATIONS LIKE SMALL OFFICES OR STORAGE AREAS. BY PROVIDING CONTROL OF TWO LOADS FROM A SINGLE GANG DEVICE, THE CS-350-N HELPS REDUCE WALL CLUTTER. – BY WATTSTOPPER
