This is the LC&D 16 relay dimming blue box lighting control panel. Check out our Acuity products here.

• Master Panel in Surface Mount Enclosure
• Modem for Programming Support via Factory (order with Modem)
• Order Pre-Programmed for Easy No Hassle Installation
• 100% Digital 32 Channel Astronomical Time Clock
• Built-In Photocell Input on Board
• 16 Relays
• 0-10 Volt Dimming Control
• Link Multiple Panels and Switches via Cat 5 Cable
• Connect Up to 16 Digital Devices

LC&D GR1416LT Blue Box Relay Panel

• Master Panel in Surface Mount Enclosure
• Modem not included
• Order Pre-Programmed for Easy No Hassle Installation (fees apply)
• 100% Digital 32 Channel Astronomical Time Clock
• Built-In Photocell Input on Board
• 16 Relays (included)
• Switching only (no dimming)
• Link Multiple Panels and Switches via Cat 5 Cable
• Connect Up to 16 Digital Devices

This is a complete basic system and does not include modem or other accessories. For custom options check out our customizer here.

For more information visit the Acuity website here.

This is the 32 relay master LC&D lighting control panel. Check out our Acuity products here.

• Master Panel in Surface Mount Enclosure
• Modem for Programming Support (order with Modem)
• 32 Relay Panel is Pre-Programmed by Factory for Easy No Hassle Installation
• Programmable through Unity 2 Software (through a PC)
• 100% Digital 32 Channel Astronomical Time Clock
• 32 Relays (Relay Options Available)
• Link Multiple Panels and Switches via Cat 5 Cable
• Link up to 127 Addresses of Digital Devices via Cat. 5 Cable with RJ45 Connectors up to 4,000 Ft

This is the 48 relay master LC&D lighting control panel. Check out our Acuity products here.

• Master Panel in Surface Mount Enclosure
• Modem for Programming Support (order with Modem)
• 48 Relay Panel is Pre-Programmed by Factory for Easy No Hassle Installation
• Programmable through Unity 2 Software (through a PC)
• 100% Digital 32 Channel Astronomical Time Clock
• 48 Relays (Relay Options Available)
• Link Multiple Panels and Switches via Cat 5 Cable
• Link up to 127 Addresses of Digital Devices via Cat. 5 Cable with RJ45 Connectors up to 4,000 Ft

This is the LC&D Knightsbridge digital switch. Check out our Acuity products here.

• Knightrbridge Digital Switch
• Compatible to any Acuity LC&D Blue Box or GR2400 system and is connected via Cat. 5 cable
• Able to link up to 127 digital addresses via Cat. 5 cable
• Mount on any standard 2.25” deep switch box
• Program through the Lighting Control Panel Digital Time Clock
• Order with one to six buttons
• Custom engraving available
• Pilot light illuminates all push buttons

This is the LC&D digilink card. Check out our Acuity products here.

• Gateway to contact closure devices for Acuity LC&D Blue Box and GR  2400 systems
• Able to link 127 digital addresses via Cat. 5 cable
• Up to 14 contact closure inputs
• 6 input to allow digital enable/disable over the bus
• Able to connect to occupancy sensors
• Able to connect to low voltage switches
• Install directly into most panels, option to add separate housing

This is the LC&D GR1400 modem. Check out our Acuity products here.

• Blue Box Modem for connecting to Analog Phone Line
• Attaches into the interior of the Blue Box
• Connect to Phone Line for Dial-in Factory Programming Assistance

This is the LC&D voltage barrier. LC&D voltage barrier separates normal power relays from emergency power relays or different voltages. Check out our Acuity products here.

• For use on BlueBox LT GR1400 Series Panels

This is the 2-Wire Global Photosensor. The Indoor Digital Photosensor has an extended sensitivity range which allows it to be used in almost any location without needing adjustment for the reflectivity of the environment. With a dual housing construction, Indoor Digital Photosensors may be used as a full-sized sensor or separated to reduce its footprint.

• Two-wire photo sensor designed for single-zone outdoor lighting control applications
• Monitored using Digital Time Clock(DTC)
• Sealed housing for operation in wet conditions

This is the LC&D 3 wire interior photocell. Check out our Acuity products here.

• LC&D – 3 Wire Interior Photocell for Daylighting
• Can be used in almost any location without the need to adjust to the reflectivity of the environment
• Standard Ceiling Mount Configuration
• Extended sensitivity range; no adjustment needed
• Ability to be used in both open loop and closed loop applications
• Low Voltage
• Wire into LC&D Blue Box LTD Panel on board Input
• “-TZ” is for the LC&D LTD Panel

This the LC&D current limiting panel. The SilverBullet is a “sub-branch circuit current limiter” for track lighting that enforces a definite current limit to lower the VA rating of each track lighting circuit and meet code requirements. Check out our Acuity products here.

• Current limiting for up to 21 circuits
• Current limiting breakers available from 1A-15A
• AIC rating of 10,000A @ 120V – 277V
• Factory pre-assembled with each load factory labeled on the door sheet
• Each Panel is Manufactured per your specifications
• Allow 10 – 15 business days for your order to be built.