Save time and money! Have us program your Acuity LC&D Blue Box Lighting Control Panel for you.

Instructions:

1. Add this item to your cart if you would like your lighting control panel programmed.
2. After you receive your order confirmation, please reply with the programming parameters.
3. Leave the rest to us!

Feel free to catch us on the chat or call us if you have any questions.

This is the LTD field configurable LC&D. Check out our Acuity products here.

• Single pole, single throw field configured relay
• Can be configured to a double or triple pole using one-of-a-kind manual levers
• Allows up to #6 AWG wires per plug
• Manual override lever

This is the automatic control switch. The InteliSwitch® AS-100 Automatic Control Switch operates as both a manual and automatic control device. Manually, it allows users to control loads on/off. Automatically, it receives signals to turn lighting on or off from lighting control panels or other lighting control systems.

The AS-100 replaces a standard wall switch. Occupants turn the lights on and off manually by its pushbutton. However, when a timed power interrupt signal is received from a lighting control panel, the AS-100 is automatically commanded to turn on, turn off or delay off. The duration of the power interrupt signal determines how the AS-100 will operate.

Used with a lighting control panel, the AS-100 allows users to manually turn lighting on in private offices, while lighting in common areas turns on automatically. After hours, if lights were not shut off by users, a signal from the control panel would command the switch to delay off. Lighting “blink” warns users that lights will turn off in five minutes. Check out Wattstopper DLM products here.

• Settings are selected with the front pushbutton using configuration LEDs; face plate does not need to be removed for setup
• Users can select automatic-on operation, and an audible beep warning
• Selectable beep warning sounds every minute during last five minutes, and every five seconds during last minute
• Five minute delay-off time with user ability to cancel impending shutoff
• Self-adjusting zero crossing switching for consistent, reliable operation of high inrush loads
• Can be used in 3-way, 4-way and multiway switching applications
• Compatible with all electronic ballasts and motor loads
• Microcontroller enhances reliability
• Command off without delay off time

• On / off toggle switch with a captive linear-slide dimmer for a traditional wallplate opening
• HED Technology: Advanced Lutron dimming circuitry designed for compatibility with most high efficacy light bulbs
• UL Listed to control:
  •  Dimmable compact fluorescent load (CFL) with
    integrated ballast
  • Dimmable LED with integrated driver
  • Halogen
  • Incandescent

• On / off toggle switch with a captive linear-slide dimmer for a traditional wallplate opening
• HED Technology: Advanced Lutron dimming circuitry designed for compatibility with most high efficacy light bulbs
• UL Listed to control:
  •  Dimmable compact fluorescent load (CFL) with
    integrated ballast
  • Dimmable LED with integrated driver
  • Halogen
  • Incandescent

Convenient Code-Compliance Dry or Damp Locations End-of-Lamp-Life Compatible Product order number: B100 (metal case)

Benefits: • Dry or Damp Locations • Emergency mode lumen output up to 450 lumens • End-of-Lamp-Life Compatible

Dimensions 9.4” x 2.4” x 1.5” (mounting center – 8.9”)

Specifications:

UL Listed (UL924 Emergency Lighting Equipment)
Factory or Field Installation
(Dry or Damp)
Illumination Time
90 Minutes (Standard)
Initial Light Output
350 – 450 Lumens
Full Warranty
1 Year (NOT pro-rata)
Dual Input Voltage
120/277 VAC, 60 Hz
AC Input Current
280 mA
AC Input Power Rating
2.5 Watts
Test Switch
Single Pole
Battery
High-Temperature, Maintenance-Free
Nickel-Cadmium Battery
7- to 10-Year Life Expectancy
Battery Charging Current
280 mA
Recharge Time
24 Hours
Charging Indicator Light
LED
Ballast Temperature Rating (Ambient)
0°C to +50°C (32°F to 122°F)
(Damp Location)
0°C to +55°C (32°F to 131°F)
(Dry Location)
Dimensions
9.4” x 2.4” x 1.5” (238 mm x 60 mm x 38 mm)
Mounting Center 8.9” (226 mm)
Weight
2.1 lbs. (1.13 kg)

Bodine B30 Emergency Ballast. Works in conjunction with an AC ballast to convert new or existing fluorescent fixtures into emergency lighting. The emergency ballast consists of a nickel-cadmium battery, charger and electronic circuitry in one case. Can be used with most 17 – 215 W (2’ – 8’) T5, T8, T9, T10 or T12 fluorescent lamps without integral starters AC/DC Output for T5 or T8 lamps suitable for one- or two-lamp Operation for up to 3500 Lumen Output. Universal Input 120V through 277V.

UL Listed for the US and Canada
Factory or Field Installation
(Indoor and Damp)

Illumination Time
90 Minutes

Initial Light Output
900 – 3500 Lumens

Full Warranty
5 Years (NOT pro-rata)

Universal Input Voltage
120-277 VAC, 50/60 Hz

AC Input Current
110 mA

AC Input Power Rating
8.5 Watts

Test Switch/Charging Indicator Light
Two-Wire Illuminated Test Switch (2W-ITS)

Battery
High-Temperature, Maintenance-Free
Nickel-Cadmium Battery
7- to 10-Year Life Expectancy

Battery Charging Current
280 mA

Recharge Time
24 Hours

Temperature Rating (Ambient)
0°C to +50°C
(32°F to 122°F)

Dimensions
16.6” x 2.8” x 2.85”
(422 mm x 71 mm x 73 mm)
2’ (610 mm) Flexible Conduit
Mounting Center 16.05” (408mm)

Weight
7.5 lbs. (3.41 kg)

For other items like the Bodine B30 Emergency Ballast click here.

For more information on Bodine’s line of lighting solutions click here.

Bodine B30ST Emergency Ballast is code compliant and compatible with linear or compact fluorescent lamps. Please see page two of the specs for a lamp compatibility chart. Automatic Code-Compliant Testing. High Lumen Output. AC/DC Output for T5 or T8 Lamps. Universal Input (120 through 27).

UL Listed For US and Canada
Factory or Field Installation
(Indoor and Damp)

Illumination Time
90 Minutes

Initial Light Output
900 – 3500 Lumens

Full Warranty
5 Years (NOT pro-rata)

Universal Input Voltage
120-277 VAC, 50/60 Hz

AC Input Current
110 mA

AC Input Power Rating
8.5 Watts

Test Switch/Charging Indicator Light
Two-Wire Illuminated Test Switch (2W-ITS)

Battery
High-Temperature, Maintenance-Free
Nickel-Cadmium Battery
7- to 10-Year Life Expectancy

Battery Charging Current
280 mA

Recharge Time
24 Hours

Charging Indicator Light
LED

Temperature Rating (Ambient)
0°C to +50°C (32°F to 122°F)

Dimensions
16.6” x 2.8” x 2.85”
(422 mm x 71 mm x 73 mm)
2’ (610 mm) Flexible Conduit
Mounting Center 16.05” (408mm)

Weight
7.5 lbs. (3.41 kg)

Model B30ST is warranted for five (5) full years from date of purchase. Please see detailed warranty information on the Signify official website.

For other items like the Bodine B30ST Emergency Ballast click here.

For more information on Bodine’s line of lighting solutions click here.

Bodine B33 Emergency Ballast. The B33 emergency ballast works in conjunction with an INSTANT START, PARALLEL AC ballast to convert new or existing fluorescent fixtures into
emergency lighting. The emergency ballast consists of a nickel-cadmium battery, charger and electronic circuitry. Can be used with two or three 32 W (4’) T8 fluorescent lamps without integral starters. It is compatible ONLY with instant start Specification Grade 3-Lamp Parallel Emergency Illumination Up to 3400 Lumen Output. Operates three 32W T8 4′ lamps in parallel.

UL Listed
(UL924 Emergency Lighting Equipment)
Factory or Field Installation

Illumination Time
90 Minutes

Initial Light Output
2700 – 3400 Lumens

Full Warranty
5 Years (NOT pro-rata)
Dual Input Voltage
120/277 VAC, 60 Hz

AC Input Current
280 mA

AC Input Power Rating
8.0 Watts

Test Switch
Single Pole

Battery
High-Temperature, Maintenance-Free
Nickel-Cadmium Battery
7- to 10-Year Life Expectancy

Battery Charging Current
280 mA

Recharge Time
24 Hours

Charging Indicator Light
LED

Temperature Rating (Ambient)
0°C to +50°C (41°F to 122°F)

Dimensions
16.3” x 5.5” x 1.7”
(414 mm x 138 mm x 44 mm)
2’ (610 mm) Flexible Conduit
Mounting Center 15.7” (400 mm)

Weight
8.7 lbs. (3.9 kg)

For other items like the Bodine B33 Emergency Ballast click here.

For more information on Bodine’s line of lighting solutions click here.

Bodine B4CF2P Emergency Ballast. The B4CF2P emergency ballast works in conjunction with an AC ballast to convert new
or existing fluorescent fixtures into emergency lighting. The emergency lighting equipment consists of a high-temperature nickel-cadmium battery, charger and electronic circuitry in
one compact case. Specification grade; one- or two- lamp parallel operation emergency illumination.

UL Listed
(UL 924 Emergency Lighting Equipment)
Factory or Field Installation (Damp)

Illumination Time
90 Minutes

Initial Light Output
Up to 925 Lumens @ 25°C

Full Warranty
5 Years (NOT pro-rata)

Dual Input Voltage
120/277 VAC, 60 Hz

AC Input Current
330 mA

AC Input Power Rating
4 Watts

Test Switch
Single Pole

Battery
High-Temperature, Maintenance-Free
Nickel-Cadmium Battery
7- to 10-Year Life Expectancy

Battery Charging Current
220 mA

Recharge Time
36 Hours

Charging Indicator Light
LED

Temperature Rating (Ambient)
0°C to +50°C (32°F to +122°F)

Dimensions
B4CF2P (Without Conduit)
9.4” x 2.6” x 1.5” (238 mm x 66 mm x 38 mm)
Mounting Center 8.9” (226 mm)

Weight
B4CF2P (Without Conduit) 3.1 lbs. (1.4 kg)

Model B4CF2P is warranted for five (5) full years from date of purchase. Please see detailed warranty information on the Signify official website.

For other items like the Bodine B4CF2P Emergency Ballast click here.

For more information on Bodine’s line of lighting solutions click here.

Bodine B4CF2PC Emergency Ballast includes 23″ of 1/2″ conduit and can be used with multiple compact fluorescent lamp configurations. Specification grade; One- or two- lamp parallel operation emergency illumination. The B4CF2P emergency ballast works in conjunction with an AC ballast to convert new or existing fluorescent fixtures into emergency
lighting.

UL Listed
(UL 924 Emergency Lighting Equipment)
Factory or Field Installation (Damp)

Illumination Time
90 Minutes

Initial Light Output
Up to 925 Lumens @ 25°C

Full Warranty
5 Years (NOT pro-rata)

Dual Input Voltage
120/277 VAC, 60 Hz

AC Input Current
330 mA

AC Input Power Rating
4 Watts

Test Switch
Single Pole

Battery
High-Temperature, Maintenance-Free
Nickel-Cadmium Battery
7- to 10-Year Life Expectancy

Battery Charging Current
220 mA

Recharge Time
36 Hours

Charging Indicator Light
LED

Temperature Rating (Ambient)
0°C to +50°C (32°F to +122°F)

B4CF2PC (With Conduit)
9.9” x 2.6” x 1.5” (251 mm x 66 mm x 38 mm)
23” (584 mm) of 1/2” Diameter – Flex Conduit
Mounting Center 9.4” (239 mm)

Weight
B4CF2PC (With Conduit) 3.6 lbs. (1.6 kg)

Model B4CF2PC is warranted for five (5) full years from date of purchase. Please see detailed warranty information on the Signify official website.

For other items like the Bodine B4CF2PC Emergency Ballast click here.

For more information on Bodine’s line of lighting solutions click here.

Bodine B50 Emergency Ballast battery backup ballast for linear fluorescent lamps. This ballast is low profile and compatible with one or two T5 or T8 lamps, 120-277V. Lumen output up to 1600 lumens. Compatible with TLED lamps (see specs for compatibility).

UL Listed for US and Canada
Factory or Field Installation
(Indoor and Damp)

Illumination Time
90 Minutes

Initial Light Output
Up to 1600 Lumens

Full Warranty
5 Years (NOT pro-rata)

Universal Input Voltage
120 Through 277 VAC, 50 or 60 Hz
AC Input Current
60 mA

AC Input Power Rating
5.0 Watts

Test Switch
2W-ITS (2-wire Illuminated Test Switch)
Battery
High-Temperature, Maintenance-Free
Nickel-Cadmium Battery
7- to 10-Year Life Expectancy

Battery Charging Current
180 mA

Recharge Time
24 Hours

Charging Indicator Light
LED

Temperature Rating (Ambient)
0°C to +50°C (32°F to 122°F)

Dimensions
13.31” x 2.2” x 1.18”
(338.1 mm x 55.88 mm x 29.97 mm)
Mounting Center 12.8” (325 mm)

Weight
2.7 lbs. (1.26 kg)

Model B50 is warranted for five (5) full years from date of purchase. Please see detailed warranty information on the Signify official website.

For other items like the Bodine B50 Emergency Ballast click here.

For more information on Bodine’s line of lighting solutions click here.