1

TSUI-WM – TOUCHSCREEN USER INTERFACE

TOUCHSCREEN USER INTERFACE, LIGHTING CONTROLS

This is the Touchescreen user Interface.

  • Color touch screen computers that provide custom graphical user interfacing.
  • Displays are available in three configurations:
    • 7” TFT 800×480 WVGA, color display
    • 10.4” TFT 800×600 SVGA, color display
    • 13.3” TFT 1280×800 WXGA, color display
  • Displays include internal flash for local storage of graphic pages.



SW-TS-M – TOUCHSCREEN MULTI-FUNCTION SWITCH

TOUCHSCREEN MULTI-FUNCTION SWITCH, LIGHTING CONTROLS

This is the Touchscreen Multi-function switch.

  • Configurable Touch-Screen Wall Stations are Liquid Crystal Displays (LCD) with touch-screen interfacing.
  • Each switch is configurable with up to six buttons per page and up to six pages per switch.
  • Multiple button “types” are available including scene buttons, momentary buttons, timer buttons, and toggle buttons.
  • Switches are fully integrated with other components of the system to properly display the current state of the lighting in the controlled area.
  • All power and communication is done through a low voltage Cat5 daisy-chained cable.



DIM-0/10-2CH – 2 CHANNEL LOW VOLTAGE DIMMING MODULE

2 CHANNEL LOW VOLTAGE DIMMING MODULE, LIGHTING CONTROLS

This is the 2 channel low voltage dimming module.

  • Provide two channels of 0-10V dimming for up (40) ballasts per channel (80 total).
  • Combine a two-pole line voltage switching module and a two channel 0-10V dimming module. This completely disconnects the line voltage load from the source automatically when the dimmer is set to 0%.
  • Dimming Modules communicate with the Master Interface to report:
    • The dimmer’s current dimming level (0-100%)
    • The line source state (available or off)
    • The communication status (active / not available)
    • The module’s “health” (if the module is defective)
  • Interchangeable with all other RD style relay and dimming modules, providing a higher level of flexibility than currently available in the market



DIM1-2W/3W-120/277 – LINE VOLTAGE & 3-WIRE DIMMING MODULE

LINE VOLTAGE & 3-WIRE DIMMING MODULE, LIGHTING CONTROLS

This is the Line Voltage & 3-Wire Dimming Module.

  • Software configurable for either forward or reverse phase control.
  • Utilize a relay ahead of the dimmer for complete disconnection from the source voltage when the dimmer is off.
  • Dimming Modules are completely compatible with 3-wire fluorescent dimming ballasts (Hot, Dimmed Hot and Neutral).
  • Dimming Modules communicate with the Building Management Server to report:
    • The dimmer’s current dimming level (0-100% on)
    • The line source state (available or off)
    • The communication status (active / not available)
    • The module’s “health” (if the module is defective)



RS-2P-120/277 – TWO-POLE STEP RELAY MODULE

TWO-POLE STEP RELAY MODULE, LIGHTING CONTROLS

This is the Two-Pole Step Relay Module.

  • Works with step ballasts to provide multi-level lighting control from a single panel slot.
  • Utilizes dual 30A relays that are each de-rated to 16A
  • Each module incorporates the latest in “zero-cross” switching technology to greatly extend relay switching life.
  • Relay Modules communicate with the Master Interface to report:
    • The relay’s current state (on/off)
    • The line source state (available or off)
    • The communication status (active / not available)
    • The relay’s “health.” (if the relay is defective)



R-1P-120/277 – SINGLE POLE RELAY MODULE

SINGLE POLE RELAY MODULE, LIGHTING CONTROLS

This is the Single Pole Relay Module.

  • Incorporates the latest in “zero-cross” switching technology to greatly extended relay switching life.
  • Relay Modules communicate with the Master Interface to report:
    • The relay’s current state (on/off)
    • The line source state (available or off)
    • The line frequency (in Hz)
    • The communication status (active / not available)
    • The relay’s “health.” (if the relay is defective
  • Relay Modules are interchangeable with all other RD style relay and dimming modules.



LRM-2P-120/347 – LOCAL RELAY MODULE W/ OPTIONAL, 2-CHANNEL, 0-10V DIMMING

LOCAL RELAY MODULE W/ OPTIONAL, 2-CHANNEL, 0-10V DIMMING, LIGHTING CONTROLS

This is the Local Relay Module w/ optional, 2-channel, 0-10V Dimming.

  • Provide a distributed control solution which allows the installer to place the module in close proximity to the controlled load.
  • Can be connected directly to a master interface or through multi-function interfaces.
  • Local Relay Modules each encompass (2) latching (mechanically held) single pole relays and each module incorporates the latest in “zero-cross” switching technology for improved equipment life.
  • Include (3) “smart ports.” Each smart port provides a daisy-chained connection for up to (8) smart devices and are connected to the Local Relay Modules via standard Cat5 patch cables.



MSTR-DVOLT-S2 – TOUCHE MASTER INTERFACE

TOUCHE MASTER INTERFACE, LIGHTING CONTROLS

This is the Touche Master Interface.

  • Master Interfaces provide coordinated control for all of the system’s connected devices and act as a “gateway” to an Ethernet network.
  • Up to (100) directly connected devices can be controlled by one Master Interface. If Multi-Function Interfaces are implemented up to (3200) devices can be controlled by one Master Interface.
  • Auto-addressing of all connected devices is coordinated by the Master Interface.
  • Both static and dynamic IP addressing is permitted for simple and adaptable setup when Ethernet communication is required.
  • The Master Interface monitors the status of all connected devices, displays that information locally, and forwards relevant information to the programming application when appropriate.



LMSW-105 – 5-BUTTON SCENE SWITCH

5-BUTTON SCENE SWITCH, LIGHTING CONTROLS

This is the 5-button scene switch. The LMSW-105 Digital Scene Switch is a low voltage device that sets and recalls preset lighting scenes and raises and lowers lighting levels. It is part of a Digital Lighting Management (DLM) system and controls loads connected to DLM room controllers by accessing four of the 16 scenes available in a DLM local network. Check out Wattstopper DLM products here.

FEATURES:

  • Hidden configuration button for easy access to Push n’ Learn mode
  • Used with DLM dimming room controller
  • Master raise/lower paddle and all-on/all-off control
  • Infrared (IR) transceiver for wireless configuration and control
  • Sleek single gang device fits decorator wall plates
  • May be used for multi-way control applications
  • LED status indicators
  • Six color options and custom engraving options; standard buttons may be replaced in the field
  • The product meets the materials restrictions of RoHS
  • BAA/TAA-compliant models available



WattStopper WRC-TX-LM RF TRANSMITTER DLM (DIGITAL LIGHT MANAGEMENT)

RF TRANSMITTER DLM (DIGITAL LIGHT MANAGEMENT), LIGHTING CONTROLS

WattStopper WRC-TX-LM RF TRANSMITTER DLM (DIGITAL LIGHT MANAGEMENT). Wireless Receptacle Controls facilitate occupancy-based AutoOn/Auto-Off control of plug loads without the need to wire
receptacles to room controllers. A WRC transmitter works with
WRC RF-enabled relay-controlled receptacles.

The WRC-TX-LM operates on Class 2 power supplied to a DLM local network by one or more room controllers, and connects via an RJ45 connector on a 6” pigtail. It transmits On/ Off signals from all DLM occupancy sensors connected to the local network to all bound receptacles. A relay in each WRC receptacle switches the controlled outlet(s) in response to the transmission. One transmitter can be bound to up to 16 WRC receptacles, each with one or two controlled outlets. In addition, each WRC receptacle has feed thru capability for downstream
control of additional outlets.

Features

• Works with all DLM occupancy sensors
• Digital Lighting Management components plug together on a free-topology Category 5e DLM local network
• Two mounting options for convenient installation in acoustic tile or to other surfaces
• Operates in quiet 915 MHz band to avoid interference
• LED indicator communicates status during binding
• The product meets the materials restrictions of RoHS RF Receptacles (WRC Series)
• Choice of 15A or 20A rating
• Duplex receptacles with a choice of one or two controlled outlets
• Labeling meets NEMA requirements for controlled receptacles
• LED indicator communicates status during binding
• The product meets the materials restrictions of RoHS

Specifications

RF Transmitter
• Input voltage: 24VDC from DLM local network
• Current consumption: 3mA
• DLM local network connection: 1 RJ45 port via RJ45 plug and coupler (included)
• Mounts to acoustic tile or hard surface
• FCC Part 15 compliant Controlled Receptacles
• Operating voltage: 125VAC
• Load rating: 15A (WRC-15) or 20A (WRC-20)
• Auto ground strap construction
• Terminals for power feed-thru RF System (Transmitter and Receptacles)
• NEMA-approved labeling for controlled receptacles
• Frequency: 915 MHz band
• Communication range: 30’ in obstructed application; up to 150’ with clear line of sight
• One transmitter can bind to up to 16 controlled duplex receptacles
• Operating conditions; for indoor use only
• UL and cUL listed
• Five year warranty

For other items like the WattStopper WRC-TX-LM RF TRANSMITTER DLM (DIGITAL LIGHT MANAGEMENT) click here.

For more information on WattStopper’s line of lighting control solutions click here.




PP20 2P – SWITCH POWER PACK 2-POLE

SWITCH POWER PACK 2-POLE

Power packs are the heart of the low voltage sensor system. A PP20 Series power pack transforms
Class I high voltage (120/277 VAC or 347 VAC) to Class 2 15 VDC for powering remote sensors. The
PP20 and the SP20 Series slave pack are also capable of switching lighting loads on and off using
their internal relays. Class 2 wire leads connect to 18 to 22 AWG low voltage cable running to the
sensors, making installation easy and clean. Power packs also have an elongated chase nipple that
allows it to be mounted either directly through a ½ inch knockout into a junction box, or inside an
adjacent box for meeting specific local code requirements in ceiling plenums.
The most versatile power pack is the PP20, which utilizes a patented relay contact protection and
can power up to 14 sensors. Dual-circuit control can be handled by two PP20’s, one PP20 2P Series
2-Pole power pack, or a PP20 power pack and a SP20 slave packs.
FEATURES

  •  Powers Low Voltage Sensors (PP20/PP20 2P only)
  •  Self-Contained Relay(s) Switch Line Voltage Loads
  • Relay Contact Protection
  • Plenum Rated



PP 20 – SWITCH POWER PACK SINGLE POLE

SWITCH POWER PACK SINGLE POLE

Power packs are the heart of the low voltage sensor system. A PP20 Series power pack transforms
Class I high voltage (120/277 VAC or 347 VAC) to Class 2 15 VDC for powering remote sensors. The
PP20 and the SP20 Series slave pack are also capable of switching lighting loads on and off using
their internal relays. Class 2 wire leads connect to 18 to 22 AWG low voltage cable running to the
sensors, making installation easy and clean. Power packs also have an elongated chase nipple that
allows it to be mounted either directly through a ½ inch knockout into a junction box, or inside an
adjacent box for meeting specific local code requirements in ceiling plenums.
The most versatile power pack is the PP20, which utilizes a patented relay contact protection and
can power up to 14 sensors. Dual-circuit control can be handled by two PP20’s, one PP20 2P Series
2-Pole power pack, or a PP20 power pack and a SP20 slave packs.
FEATURES

  •  Powers Low Voltage Sensors (PP20/PP20 2P only)
  •  Self-Contained Relay(s) Switch Line Voltage Loads
  • Relay Contact Protection
  • Plenum Rated