This is the PIR ceiling mount occupancy sensor. The LMPC-100 low profile Digital PIR Ceiling Mount Occupancy Sensor uses passive infrared (PIR) technology and one of three lenses to detect occupancy in different types of spaces for energy-efficient control of lighting and plug loads. It is a digital sensor, and is part of a Wattstopper Digital Lighting Management (DLM) system. Check out Wattstopper DLM products here.

FEATURES:

• Plug n’ Go™ automatic configuration for quick installation and maximum energy savings
• Push n’ Learn™ functionality for customization without the need for tools or a PC
• Digital Lighting Management components plug together on a free-topology Category 5e DLM local network
• Infrared (IR) transceiver for wireless configuration and control
• 360 degree PIR coverage
• Detection Signature Processing eliminates false triggers and provides immunity to RFI and EMI
• Sensor coverage tested to NEMA Guide Publication WD 7-2000
• The product meets the materials restrictions of RoHS
• BAA/TAA-compliant models available

This is the digital plug load room controller. LMPL-101 Plug Load Room Controllers include a 20-amp relay for on/off control of connected outlets, and a high-efficiency switching power supply. They are part of a WattStopper Digital Lighting Management (DLM) system, and enable energy efficient control of plug loads. Check out Wattstopper DLM products here.

FEATURES:

• Plug n’ Go™ automatic configuration for quick installation and maximum energy savings
• Push n’ Learn™ functionality for personalization without the need for tools or a PC
• Digital Lighting Management components plug together on a free-topology Cat 5e DLM local network
• Load On/Off button
• LED indicates status of connected load

This is the PIR corner mount occupancy sensor. The LMPX-100 Digital PIR Corner Mount Occupancy Sensor uses passive infrared (PIR) technology and one of four lenses to detect occupancy in different types of spaces for energy-efficient control of lighting and plug loads. It is a digital sensor, and is part of a Wattstopper Digital Lighting Management (DLM) system. Check out Wattstopper DLM products here.

FEATURES:

• Plug n’ Go™ automatic configuration for quick installation and maximum energy savings
• Push n’ Learn™ functionality for customization without the need for tools or a PC
• Digital Lighting Management components plug together on a free-topology Category 5e DLM local network
• Infrared (IR) transceiver for wireless configuration and control
• Detection Signature Processing eliminates false triggers and provides immunity to RFI and EMI
• Sensor coverage tested to NEMA Guide Publication WD 7-2000
• The product meets the materials restrictions of RoHS
• BAA/TAA-compliant models available

This is the digital forward phase dimming room controllers (LMRC-221, LMRC-222). LMRC-220 Series Digital Room Controllers include one or two output(s) to control a total of up to 20 amps. Load ratings include incandescent, magnetic low voltage, forward phase compatible electronic low voltage and LED drivers, neon and cold cathode, and dimmable two-wire and three-wire fluorescent ballasts. They are the foundation of a WattStopper Digital Lighting Management (DLM) system, and allow integration of occupancy sensors, daylighting controls and switches for energy-efficient lighting control. Check out Wattstopper DLM products here.

FEATURES:

• Plug n’ Go™ automatic configuration for quick installation and maximum energy savings
• Push n’ Learn™ functionality for personalization without the need for tools or a PC
• Digital Lighting Management components plug together on free-topology Cat 5e DLM local network
• On/Off/Dim local override button for each load
• LED indicates status of each load
• Integral current monitoring of total connected load
• Optional lamp burn in; 12 or 100 hours
• Square law, 2-wire and 3-wire fluorescent/LED curves
• 4 RJ45 ports with integral strain relief
• Zero-crossing circuitry for each relay for reliability and increased product life
• UL 2043 plenum rated
• RoHS compliant

This is the 5-button scene switch. The LMSW-105 Digital Scene Switch is a low voltage device that sets and recalls preset lighting scenes and raises and lowers lighting levels. It is part of a Digital Lighting Management (DLM) system and controls loads connected to DLM room controllers by accessing four of the 16 scenes available in a DLM local network. Check out Wattstopper DLM products here.

FEATURES:

• Hidden configuration button for easy access to Push n’ Learn mode
• Used with DLM dimming room controller
• Master raise/lower paddle and all-on/all-off control
• Infrared (IR) transceiver for wireless configuration and control
• Sleek single gang device fits decorator wall plates
• May be used for multi-way control applications
• LED status indicators
• Six color options and custom engraving options; standard buttons may be replaced in the field
• The product meets the materials restrictions of RoHS
• BAA/TAA-compliant models available

This is the passive infrared wall switch occupancy sensor. The PW-301 passive infrared (PIR) wall switch sensor can turn lights OFF and ON based on occupancy. It is characterized by high sensitivity to small and large movements, appealing aesthetics, and a variety of features. The PW-301 replaces existing wall switches and installs in a single gang junction box with or without either neutral wiring. Factory default operation is for Manual-ON, so that users turn lights on only when needed. It uses advanced PIR technology to detect occupancy and keep lighting ON when it is needed. Once the space is vacated and the time delay elapses, lights automatically turn OFF. DIP switch settings allow for a variety of control options such as Auto-ON operation, walk-through and test modes. Multiple sensors may be used for control of one or more loads from up to four locations. The PW-301 sensor uses a patent pending Neutral Sense Technology. Any PW-301 sensor can be used for a two-wire or three wire application, either to work with existing wiring, or to meet local or national code requirements. An easy-to-break plastic tab covers neutral screw terminals. Once the sensor is connected to neutral it complies with all codes that restrict current leakage to ground. Check out Wattstopper DLM products here.

• Complies with 2011 NEC requirements
• Zero-crossing for long relay life
• Vandal resistant lens combines precise coverage with durability
• Selectable walk-through mode turns lights off three minutes after the room is initially occupied if no motion is detected after the first 30 seconds
• Test mode allows quick and easy adjustments
• Selectable audible and/or visual alerts for impending shutoff
• LED indicates occupancy detection
• In automatic mode, sensor returns automatically to Auto-ON after lights are turned off manually; ideal for presentations
• Optional light level sensing with simple setup
• Service mode allows sensor to operate as a service switch in the unlikely event of a failure
• Sensor coverage tested to NEMA Guide Publication WD 7-2000
• Compatible with decorator wall plates

This is the passive infrared dual relay wall switch occupancy sensor. The PW-302 passive infrared (PIR) wall switch sensor turns lights ON and OFF based on occupancy. It contains two relays for controlling two independent lighting loads or circuits, and a variety of features. The PW-302 replaces existing wall switches and installs in a single gang junction box with or without either neutral wiring. Each of the PW-302’s relays can control a separate lighting load. The device uses advanced PIR technology to detect occupancy and turn the first relay ON. The other relay must be manually engaged to turn remaining lights on. Once the space is vacated and the time delay elapses, all lights automatically turn OFF. Dual ON/OFF buttons allow the user to manually turn on and off each of the loads. DIP switch settings allow for a variety of control options such as Manual-ON or Auto-ON for each relay, walk-through and test modes. Multiple sensors may be used for control of one or more loads from up to four locations. The PW-302 sensor uses a patent pending Neutral Sense Technology. Any PW-302 sensor can be used for a two-wire or three wire application, either to work with existing wiring, or to meet local or national code requirements. An easy-to-break plastic tab covers neutral screw terminals. Once the sensor is connected to neutral it complies with all codes that restrict current leakage to ground. Check out Wattstopper DLM products here.

• Complies with 2011 NEC requirements
• Zero-crossing on both relays for long relay life
• Vandal resistant lens combines precise coverage with durability
• Selectable walk-through mode turns lights off three minutes after the room is initially occupied if no motion is detected after the first 30 seconds
• Test mode allows quick and easy adjustments
• LED indicates occupancy detection
• Selectable audible and/or visual alerts for impending shutoff
• In automatic mode, sensor returns automatically to Auto-ON after lights are turned off manually; ideal for presentations
• Optional light level sensor holds secondary lights off when ambient lighting is above the preset level
• Service mode allows sensor to operate as a service switch in the unlikely event of a failure
• Sensor coverage tested to NEMA Guide Publication WD 7-2000
• Compatible with decorator wall plates

This is the PIR multi-way wall switch occupancy sensor. The RH-250 Passive Infrared (PIR) Multi-way Occupancy Sensor provides automatic lighting shutoff for a variety of applications including those with multiple switch locations. It offers optional automatic lighting activation. The RH-250 operates either as a manual- or automatic-on sensor. When in manual-on mode, users must press the pushbutton to turn on lighting. The RH-250 employs PIR technology to sense the difference between the infrared energy from a person in motion and the background space. It keeps lighting on as long as motion is detected and provides automatic shutoff, following a user-selected time delay, when motion is no longer detected. Users may turn the lighting off manually. When automatic-on operation has been selected, the adjustable light level sensor may be set to prevent lights from turning on automatically if sufficient daylight is present.

An RH-250 connected to other RH-250s and/or RH-253 Decorator Single Pole Momentary Switches provides true multi-way on/off control. An occupant simply presses the on/ off pushbutton of any connected device to turn on the lighting. Lights remain on as long as one of the RH-250s continues to detect occupancy. The user may turn off the lighting by pressing the on/off button on any of the connected devices. If the room becomes vacant and lights are on, they will be switched off automatically following the time delay of the last RH-250 to detect occupancy. Check out Wattstopper DLM products here.

• Complies with 2011 NEC requirements
• Replaces single- or multi-pole switches
• Provides multi-way control when used with other RH-250s or RH-253s
• Adjustable time delay, 15 seconds to 30 minutes
• Lighted switch for visibility in darkened rooms
• If enabled, light level sensing prevents automatic-on when adequate daylight exists
• Low-profile styling
• Choice of five decorator colors; lens is color-matched to device
• Operates most common types of lighting
• Relay-based switching
• No current leakage to load in off mode for safety
• Compatible with decorator wall plates
• Compliant with Nonresidential CA Title 24 requirements

WS-CaseStudy-GreenHome_OccupancyVacancyTimeswitches

This is the decorator single pole momentary switch. The RH-253 is a single pole momentary switch for on/off control. It is typically used with multi-way occupancy and vacancy sensors for applications requiring multiple switch locations. Users tap the switch to turn connected lighting on or off. The RH-253 provides true multi-way on/off control when connected to one or more CH-250, CU-250, CD-250, RH-250 or RD-250 wall switch sensors. Check out Wattstopper DLM products here.

• Replaces three-way or four-way switches when used with multi-way sensors
• Works with CH-250, CU-250 and RH-250 sensors and CD-250 and RD-250 sensor dimmers.
• Low-profile styling
• Choice of five decorator colors
• Compatible with decorator wall plates

WS-CaseStudy-GreenHome_OccupancyVacancyTimeswitches

This is the PIR wall switch vacancy sensor w/ NightLight. The RS-150BA-N Passive Infrared (PIR) Vacancy Sensor provides automatic shutoff for single-pole lighting control applications. It is engineered to comply with specific provisions of California’s Title 24-2013 energy code.

The RS-150BA-N operates as a manual-on sensor. Users must press the on/off pushbutton to turn on lighting. The RS-150BA-N employs PIR technology to sense the difference between the infrared energy from a person in motion and the background space. It keeps lighting on as long as motion is detected and provides automatic shutoff, following a 30-minute time delay, when motion is no longer detected. Users may turn the lighting off manually.

The integral nightlight helps preserve night vision by providing low-level illumination when the connected lighting is off. The nightlight uses energy-efficient LEDs. Check out Wattstopper DLM products here.

• Complies with 2011 NEC requirements
• Replaces single-pole switches
• Fixed 30-minute time delay; no adjustment necessary
• Amber LED nightlight illuminates whenever connected load is off
• Lighted switch for visibility in darkened rooms
• Low-profile styling
• Choice of five decorator colors; lens is color-matched todevice
• Operates most common types of lighting or fan motors
• Relay-based switching
• No current leakage to load in off mode for safety
• Compatible with decorator wall plates
• CA Title 24 compliant

WS-CaseStudy-GreenHome_OccupancyVacancyTimeswitches

This is the PIR wall switch occupancy sensor. The RS-250 Passive Infrared (PIR) Occupancy Sensor provides automatic lighting shutoff for single-pole lighting control applications. It offers optional automatic lighting activation.

The RS-250 operates either as a manual- or automatic-on sensor. When in manual-on mode, users must press the pushbutton to turn on lighting. The RS-250 employs PIR technology to sense the difference between the infrared energy from a person in motion and the background space. It keeps lighting on as long as motion is detected and provides automatic shutoff, following a user-selected time delay, when motion is no longer detected. Users may turn the lighting off manually.

When automatic-on operation has been selected, the adjustable light level sensor may be set to prevent lights from turning on automatically if sufficient daylight is present. Check out Wattstopper DLM products here.

• Complies with 2011 NEC requirements
• Replaces single-pole switches
• Adjustable time delay, 15 seconds to 30 minutes
• Lighted switch for visibility in darkened rooms
• If enabled, light level sensing prevents automatic-on when adequate daylight exists
• Low-profile styling
• Choice of five decorator colors; lens is color-matched to device
• Operates most common types of lighting
• Relay-based switching
• No current leakage to load in off mode for safety
• Compatible with decorator wall plates
• Compliant with Nonresidential CA Title 24 requirements

This is the programmable countdown time switch. The RT-100 Programmable Countdown Time Switch automatically turns lighting or other loads off when the programmed on-time expires. It replaces standard single-pole wall switches for energy savings inside and outside.

Users turn connected lights on by pressing the on/off button, which activates the on-time programmed by the installer. If users want the lights to remain on for a different period of time, they simply press and hold the on/off button until the display shows the desired time. When the button is released, the lights will remain on for the newly selected on-time. After the time has elapsed, lighting is automatically turned off. Lights can be turned off before the countdown is complete by pressing the on/ off button.

The on-time can be programmed for 5 to 55 minutes (in 5-minute increments) or 1 to 12 hours (in 15-minute increments). It is typically set for the period of time the connected load normally needs to remain on. Other programming options include enabling or disabling audible and visible shutoff warnings. Check out Wattstopper DLM products here.

• Programmable countdown time switch
• Replaces single-pole switch
• Adjustable on-time from 5 minutes to 12 hours
• Optional audible beep and/or visible light flash warnings before automatic off
• Lighted switch for visibility in darkened rooms
• Low-profile styling
• Choice of five decorator colors
• Operates most common types of lighting
• Relay-based switching
• Zero crossing reduces stress on the relay and increases product longevity
• No current leakage to load in off mode for safety
• Compatible with decorator wall plates