This is the wall box decorator rotary timer. Check out the Pass & Seymour products.

• Units with “Hold” feature may be turned counter-clockwise to hold the load on without timing function.
• Turning clockwise causes unit to time load off after desired time delay.
• Quiet operation.
• Time range from 5 minutes to 12 hours.
• Available with or without hold.
• Decorator styling.
• Easily installed.
• Large head screw terminals.
• Accurate to +/- 5 percent.
• Motor rated.
• Energy saving.

• Can be used in conjunction with the following dimmer(s) and switch(es): Maestro®, Maestro IR®, Maestro Wireless®, Pico™ wireless control, Spacer System®, Diva®, Lyneo® Lx, Skylark®, Skylark Contour™
• All Lutron® wallplates are screwless, seamless and have no visible hardware; the front plate securely snaps into the alignment adapter plate
• Full line of wiring devices in designer style opening
• Blank inserts available for Gloss colors and Satin colors
• Customize your designer wallplate with engraving

• Can be used in conjunction with the following dimmer(s) and switch(es): Maestro®, Maestro IR®, Maestro Wireless®, Pico™ wireless control, Spacer System®, Diva®, Lyneo® Lx, Skylark®, Skylark Contour™
• All Lutron® wallplates are screwless, seamless and have no visible hardware; the front plate securely snaps into the alignment adapter plate
• Full line of wiring devices in designer style opening
• Blank inserts available for Gloss colors (DV-BI-) and Satin colors (SC-BI-)
• Customize your designer wallplate with engraving

This is the Claro Wallplate 3-Gang. Check out the RadioRA 2 products page here.

• Can be used in conjunction with the following dimmer(s) and switch(es): Maestro®, Maestro IR®, Maestro Wireless®, Pico™ wireless control, Spacer System®, Diva®, Lyneo® Lx, Skylark®, Skylark Contour™
• All Lutron wallplates are screwless, seamless and have no visible hardware; the front plate securely snaps into the alignment adapter plate
• Full line of wiring devices in designer style opening
• Blank inserts available for Gloss colors and Satin colors
• Customize your designer wallplate with engraving
• More finishes available. Please contact us for pricing

This is the Claro Wallplate 4-Gang. Check out the RadioRA 2 products page here.

• Can be used in conjunction with the following dimmer(s) and switch(es): Maestro®, Maestro IR®, Maestro Wireless®, Pico™ wireless control, Spacer System®, Diva®, Lyneo® Lx, Skylark®, Skylark Contour™
• All Lutron® wallplates are screwless, seamless and have no visible hardware; the front plate securely snaps into the alignment adapter plate
• Full line of wiring devices in designer style opening
• Blank inserts available for Gloss colors and Satin colors
• Customize your designer wallplate with engraving

This is the Claro Wallplate 5-Gang. Check out the RadioRA 2 products page here.

• Can be used in conjunction with the following dimmer(s) and switch(es): Maestro®, Maestro IR®, Maestro Wireless®, Pico™ wireless control, Spacer System®, Diva®, Lyneo® Lx, Skylark®, Skylark Contour™
• All Lutron® wallplates are screwless, seamless and have no visible hardware; the front plate securely snaps into the alignment adapter plate
• Full line of wiring devices in designer style opening
• Blank inserts available for Gloss colors and Satin colors
• Customize your designer wallplate with engraving

This is the 2 channel low voltage dimming module.

• Provide two channels of 0-10V dimming for up (40) ballasts per channel (80 total).
• Combine a two-pole line voltage switching module and a two channel 0-10V dimming module. This completely disconnects the line voltage load from the source automatically when the dimmer is set to 0%.
• Dimming Modules communicate with the Master Interface to report:
  • The dimmer’s current dimming level (0-100%)
  • The line source state (available or off)
  • The communication status (active / not available)
  • The module’s “health” (if the module is defective)
• Interchangeable with all other RD style relay and dimming modules, providing a higher level of flexibility than currently available in the market

This is the Line Voltage & 3-Wire Dimming Module.

• Software configurable for either forward or reverse phase control.
• Utilize a relay ahead of the dimmer for complete disconnection from the source voltage when the dimmer is off.
• Dimming Modules are completely compatible with 3-wire fluorescent dimming ballasts (Hot, Dimmed Hot and Neutral).
• Dimming Modules communicate with the Building Management Server to report:
  • The dimmer’s current dimming level (0-100% on)
  • The line source state (available or off)
  • The communication status (active / not available)
  • The module’s “health” (if the module is defective)

This is the 1-gang decorator-style faceplate. The FP-G line of decorator-style faceplates from Crestron® is available in several designer colors with a smooth or textured finish. The faceplates are offered in 1-gang, 2-gang, 3-gang, and 4-gang styles to suit every installation need. Check out the Züm by Crestron products here.

• Non-Plenum rated cable for use with the following Lutron systems
  • GRAFIK Eye ® 3000
  • GRAFIK Eye ® QS
  • Energi Savr Node TM

• Non-Plenum rated cable for use with the following Lutron systems
  • GRAFIK Eye ® 3000
  • GRAFIK Eye ® QS
  • Energi Savr Node TM