• Non-Plenum rated cable for use with the following Lutron systems
  • GRAFIK Eye ® 3000
  • GRAFIK Eye ® QS
  • Energi Savr Node TM

• Uses wireless infrared communications to select and adjust scenes.
• Scene selection buttons select four scenes.
• Off button turns all lights off.
• Master raise/lower button brightens or dims all lighting zones.
• Works with GRAFIK Eye 3000 and 4000 Series Control Units or any Wallstation with an infrared receiver.

• 100-277 V~ forward, reverse, and center phase control input capability
• Provides 0—10 V- control and switching capabilities to switch and dim current sourcing fluorescent ballasts and LED drivers.
• Switches and dims current sourcing 0—10 VDC electronic dimming ballasts/drivers powered by
  100—277 VAC. Switches up to 16 A of electronic capacitive ballasts/drivers.

Solid Ceiling (Drywall, Plaster, Concrete, or Wood)

• Temporary mounting: Ten (10) temporary mounting strips can be purchased in the kit, L-CMDPIRKIT, for temporarily mounting and testing the sensor.
• Permanent mounting: Screws and anchors (for drywall or plaster) provided to mount the sensor.

Recess-Mount:

• Do not recess-mount sensor in a metal surface.
• Recess-mounting ring requires an opening of 3 in (76 mm) in diameter.
• Recess-mounting ring secures internally to ceiling. Sensor twists into the recess mounting ring and sits flush with ceiling.

• Adjust temperature settings anytime from the Lutron app – whether home or away.
• 7-day programmable schedule.
• Large touchscreen display with backlight.
• Communicates via Wi-Fi technology.
• Smart Response Technology – continually learns when to pre-heat/cool your home so you are comfortable at your pre-programmed times.
• Supports up to 3 heat and 2 cool stages.

• Mount the Pico to a pedestal and you have a simple and elegant tabletop control.
• Single, double, and triple pedestals available. Please note that Lutron has discontinued production of the 4-Pedestal option.
• White and black options available

The LMLS-MB1 and LMLS-MB2 mounting brackets provide the flexibility to mount the LMLS-400 and LMLS-500 Photosensors to walls, skylight wells or J-Boxes. They are specifically designed to be used in conjunction with these Photosensors.

FEATURES:

• Material: ABS, UL 94 5V Flame Retardant Material
• Indoor Use Only
• Mounting Options:
• LMLS-MB1: 4-Square J-Box / 2-Gang J-Box
• LMLS-MB2: Screw to Wall / Tape to wall with double sided tape

This is the Local Relay Module w/ optional, 2-channel, 0-10V Dimming.

• Provide a distributed control solution which allows the installer to place the module in close proximity to the controlled load.
• Can be connected directly to a master interface or through multi-function interfaces.
• Local Relay Modules each encompass (2) latching (mechanically held) single pole relays and each module incorporates the latest in “zero-cross” switching technology for improved equipment life.
• Include (3) “smart ports.” Each smart port provides a daisy-chained connection for up to (8) smart devices and are connected to the Local Relay Modules via standard Cat5 patch cables.

• Provides capability for a zone on a GRAFIK Eye control unit (or other product) to dim a fully loaded circuit of lighting.
• May be used to control incandescent, electronic low-voltage, magnetic low-voltage, and neon/cold cathode lighting sources, as well as Lutron Tu-Wire fluorescent dimming ballasts.
• Automatically selects leading-edge or trailing-edge dimming for low-voltage transformers.
• Provides power and dimming for one zone.
• Up to 3 power modules may be wired on a single GRAFIK Eye zone.

• Provides capability for a zone on a GRAFIK Eye control unit (or other product) to dim a fully loaded circuit of lighting.
• May be used to control incandescent, electronic low-voltage, magnetic low-voltage, and neon/cold cathode lighting sources, as well as Lutron Tu-Wire fluorescent dimming ballasts.
• Automatically selects leading-edge or trailing-edge dimming for low-voltage transformers.
• Provides power and dimming for one zone.
• Up to 3 power modules may be wired on a single GRAFIK Eye zone.

Mounting Considerations:

• Mounting of any RF devices on or in close proximity to a metal surface will drastically reduce the effective range of radio signal transmission or reception.
• All RF devices must be mounted on non-conductive materials to ensure proper performance.
• If you wish to mount your PicoR wireless control to a metal surface, the PICO-MOUNT-1-XX-CPN5733 will be required in order to maintain proper RF performance.