Solid Ceiling (Drywall, Plaster, Concrete, or Wood)

• Temporary mounting: Ten (10) temporary mounting strips can be purchased in the kit, L-CMDPIRKIT, for temporarily mounting and testing the sensor.
• Permanent mounting: Screws and anchors (for drywall or plaster) provided to mount the sensor.

Recess-Mount:

• Do not recess-mount sensor in a metal surface.
• Recess-mounting ring requires an opening of 3 in (76 mm) in diameter.
• Recess-mounting ring secures internally to ceiling. Sensor twists into the recess mounting ring and sits flush with ceiling.

• Adjust temperature settings anytime from the Lutron app – whether home or away.
• 7-day programmable schedule.
• Large touchscreen display with backlight.
• Communicates via Wi-Fi technology.
• Smart Response Technology – continually learns when to pre-heat/cool your home so you are comfortable at your pre-programmed times.
• Supports up to 3 heat and 2 cool stages.

• Mount the Pico to a pedestal and you have a simple and elegant tabletop control.
• Single, double, and triple pedestals available. Please note that Lutron has discontinued production of the 4-Pedestal option.
• White and black options available

This is the Lightcloud controller. The Controller is the basic building block of the Lightcloud system. Use it for switching and 0-10V dimming. Deploy it for power management. Or simply use it to extend the range of your Lightcloud mesh network.

• Easy setup – simply power on, confirm device connectivity and call 844-LIGHTCLOUD
• Cylindrical design for easy installation at threaded junction boxes
• Cloud-based management – no software to install or maintain
• Connects to Lightcloud Gateway and other Lightcloud devices
• Connects via a secure, encrypted, and self-healing 2.4 GHz wireless mesh network
• Repeater Mode to extend range of wireless mesh network
• If power to Controller is lost, notification is shown in the Lightcloud application
• If communication is lost, Controller can fall back to a customizable emergency state

RAB Lighting creates high quality, affordable, well designed and energy efficient indoor and outdoor LED lighting, fixtures, sensors and controls. Check out the RAB Lighting Controls page.

This is the Touch Lighting Control. The Touch is a wall-mounted touch screen that gives you switching, dimming and scene control for all your zones. This display measures a full 10″ and requires no internet access, communicating with other Lightcloud devices over a wireless mesh network.

• 10″ tablet for switching, dimming and scene control
• Wall-mounted, AC-Powered – never lose it, never charge it
• Customizable interface to show only the zones and scenes you want
• Communicates directly with other Lightcloud devices – no internet required

RAB Lighting creates high quality, affordable, well designed and energy efficient indoor and outdoor LED lighting, fixtures, sensors and controls. Check out the RAB Lighting Controls page.

This is the 2 network bridge module DLM. The LMBC-300 Digital Network Bridge provides a segment network connection for a group of Digital Lighting Management (DLM) local network devices. This enables individual DLM local networks to be aggregated into a larger system, which, in turn, can be remotely managed from a DLM Segment Manager or a building automation system (BAS). Check out Wattstopper DLM products here.

FEATURES:

• Component of Digital Lighting Management integrated control systems
• Adds segment network functionality a to DLM local network
• Communicates all DLM local network data and device settings to a Segment Manager and/or LMCS software
• Easy integration with BAS through use of standard BACnet objects to represent DLM local network device settings and states
• Class 2 operation and plenum rated housing facilitate simple installation
• DIN rail mounting clamp provided with the unit to facilitate box or panel mounting
• UL 2043 plenum rated
• This product meets the materials restrictions of RoHS
• BAA/TAA-compliant models available

This is the Softswitch RF Relay Module. Check out the RadioRA 2 products page here.

• Lutron patented Softswitch technology prevents arcing of relay contacts, extending product lifetime.
• Various operating voltages available—refer to model number chart below for details on voltage requirements.
• Capable of switching 16 A of general-purpose loads.
• Utilizes Lutron Clear Connect RF Technology—refer to model number chart below for frequency band data and Lutron system compatibility.
• Mounts to an electrical junction box through a 1/2 in or 21 mm trade-size knockout opening.
• Complies with requirements for use in a compartment handling environmental air (plenum) per NECR 2011 300.22(C)(3) (LMJ- model only).

The LMLS-MB1 and LMLS-MB2 mounting brackets provide the flexibility to mount the LMLS-400 and LMLS-500 Photosensors to walls, skylight wells or J-Boxes. They are specifically designed to be used in conjunction with these Photosensors.

FEATURES:

• Material: ABS, UL 94 5V Flame Retardant Material
• Indoor Use Only
• Mounting Options:
• LMLS-MB1: 4-Square J-Box / 2-Gang J-Box
• LMLS-MB2: Screw to Wall / Tape to wall with double sided tape

This is the PIR ceiling mount occupancy sensor. The LMPC-100 low profile Digital PIR Ceiling Mount Occupancy Sensor uses passive infrared (PIR) technology and one of three lenses to detect occupancy in different types of spaces for energy-efficient control of lighting and plug loads. It is a digital sensor, and is part of a Wattstopper Digital Lighting Management (DLM) system. Check out Wattstopper DLM products here.

FEATURES:

• Plug n’ Go™ automatic configuration for quick installation and maximum energy savings
• Push n’ Learn™ functionality for customization without the need for tools or a PC
• Digital Lighting Management components plug together on a free-topology Category 5e DLM local network
• Infrared (IR) transceiver for wireless configuration and control
• 360 degree PIR coverage
• Detection Signature Processing eliminates false triggers and provides immunity to RFI and EMI
• Sensor coverage tested to NEMA Guide Publication WD 7-2000
• The product meets the materials restrictions of RoHS
• BAA/TAA-compliant models available

This is the digital plug load room controller. LMPL-101 Plug Load Room Controllers include a 20-amp relay for on/off control of connected outlets, and a high-efficiency switching power supply. They are part of a WattStopper Digital Lighting Management (DLM) system, and enable energy efficient control of plug loads. Check out Wattstopper DLM products here.

FEATURES:

• Plug n’ Go™ automatic configuration for quick installation and maximum energy savings
• Push n’ Learn™ functionality for personalization without the need for tools or a PC
• Digital Lighting Management components plug together on a free-topology Cat 5e DLM local network
• Load On/Off button
• LED indicates status of connected load

This is the 0-10 volt dimming room controller. LMRC-210 Series Digital Room Controllers include one, two or three relay(s) to switch a total of 15 or 20 amps, a high-efficiency switching power supply and one 0-10 volt output per relay for control of dimmable loads including electronic ballasts (Advance Mark 7, or equivalent). They are the foundation of a Wattstopper Digital Lighting Management (DLM) system, and allow integration of occupancy sensors, daylighting controls and switches for energy-efficient lighting control. Check out Wattstopper DLM products here.

FEATURES:

• Plug n’ Go™ automatic configuration for quick installation and maximum energy savings
• Push n’ Learn™ functionality for personalization without the need for tools or a PC
• Digital Lighting Management components plug together on a free-topology Cat 5e DLM local network
• On/Off/Dim local override button for each load
• LED indicates status of each load
• 0-10V signal opens on loss of LMRC power
• Integral current monitoring of total connected load
• Optional lamp burn in; 12 or 100 hours
• 4 RJ45 ports with integral strain relief
• Zero-crossing circuitry for each relay for reliability and increased product life
• UL 2043 plenum rated
• The product meets the materials restrictions of RoHS
• BAA/TAA-compliant models available