This is the RadioRA 2 tabletop designer keypad. RadioRA® 2 Tabletop Designer Keypads provide homeowners with a simple and elegant way to operate lights, shade / draperies, motorized screens, and many other devices. RadioRA® 2 Keypads feature large, easy-to-use buttons, plus a unique backlit engraving option that makes the Keypads readable any time of the day or night. The Keypad buttons are rounded, allowing engraving to be displayed at an upward angle, increasing readability. The versatile design of RadioRA® 2 Tabletop Designer Keypads allows them to be mounted on a wall, placed on top of a table, or used as a cordless Keypad. The Keypads can be powered by a DC adapter (see Low-Voltage Transformer spec P/N 369561, included with -RR models) or with 2 AAA batteries. Check out the RadioRA 2 products page here.

• At the press of a single button, lights fade ON or OFF to desired levels and shades / draperies open or close to desired positions.
• Light levels and shade / drapery positions can be fi ne-tuned by pressing and holding the raise / lower buttons.
• Programmable to select whole-house or single room preset levels or positions.
• Adjustable backlight intensity. Design Features
• Prepaid engraving included. Redeemable for one engraved button kit.
• Two “Wake-up” options for cordless operation: — “Wake-up and Activate” (default) – Single button press will “wake up” and activate selected button. — “Wake-up Only” – Single button press will “wake-up” and show status. Subsequent press will activate button.

This is the RadioRA 2 tabletop designer keypad. RadioRA® 2 Tabletop Designer Keypads provide homeowners with a simple and elegant way to operate lights, shade / draperies, motorized screens, and many other devices. RadioRA® 2 Keypads feature large, easy-to-use buttons, plus a unique backlit engraving option that makes the Keypads readable any time of the day or night. The Keypad buttons are rounded, allowing engraving to be displayed at an upward angle, increasing readability. The versatile design of RadioRA® 2 Tabletop Designer Keypads allows them to be mounted on a wall, placed on top of a table, or used as a cordless Keypad. The Keypads can be powered by a DC adapter (see Low-Voltage Transformer spec P/N 369561, included with -RR models) or with 2 AAA batteries. Check out the RadioRA 2 products page here.

• At the press of a single button, lights fade ON or OFF to desired levels and shades / draperies open or close to desired positions.
• Light levels and shade / drapery positions can be fi ne-tuned by pressing and holding the raise / lower buttons.
• Programmable to select whole-house or single room preset levels or positions.
• Adjustable backlight intensity. Design Features
• Prepaid engraving included. Redeemable for one engraved button kit.
• Two “Wake-up” options for cordless operation: “Wake-up and Activate” (default), Single button press will “wake up” and activate selected button, “Wake-up Only” – Single button press will “wake-up” and show status. Subsequent press will activate button.

This is the RadioRA 2 visor control receiver. RadioRA® 2 Receiver provides two (2) Contact Closure Inputs (CCI) for integration with other systems and one (1) CCI for security systems. The CCIs can be configured to accept maintained or momentary contact closures. The security input is always a maintained CCI. The Receiver also has four (4) maintained or momentary Contact Closure Outputs (CCO) to control up to four (4) garage doors or motorized gates. Check out the RadioRA 2 products page here.

• Each output can be controlled locally at the Receiver or remotely by a Transmitter or keypad button.
• The Receiver ‘Keypad’ or ‘Inputs’ buttons can be programmed to light and shades /draperies. Design Features
• Full or Flash security options.
• The Transmitter can remotely control the ‘Keypad’, ‘Security Input’, and ‘Outputs’ buttons on the Receiver.
• LR-3B-H-SW:  Visor Control Transmitter (Sold Separately).

This is the Two-Pole Step Relay Module.

• Works with step ballasts to provide multi-level lighting control from a single panel slot.
• Utilizes dual 30A relays that are each de-rated to 16A
• Each module incorporates the latest in “zero-cross” switching technology to greatly extend relay switching life.
• Relay Modules communicate with the Master Interface to report:
  • The relay’s current state (on/off)
  • The line source state (available or off)
  • The communication status (active / not available)
  • The relay’s “health.” (if the relay is defective)

WattStopper B347D-P Power Packs provide 24VDC operating voltage to all WattStopper 24VDC occupancy sensors and daylighting controllers. Auxiliary Relay Packs are similar to power packs, but only have an isolated relay and no transformer power supply.

B347D-P Power Packs consist of a transformer and high-current relay combined in one small, powerful package. The transformer has a primary high voltage input and a secondary, low voltage output (24 VDC, 114 mA with relay connected). The secondary voltage provides operating power to WattStopper sensors. When the occupancy sensors detect motion or daylighting sensors detect inadequate ambient light, they electrically close an internal circuit, which sends 24 VDC back to the Power or Auxiliary Relay Packs that control the lighting system.

• Self-contained transformer relay system
• Available for 347 volt systems
• Capable of switching up to 20 Amps of electrical load (ballast) at 120/277V for S120/277/347 models, 15A at 347V for all models
• Low voltage leads are teflon coated for use in plenum applications
• Can be used as a low voltage switch for other applications or as stand-alone, low voltage switch

• 1/2 inch snap-in nipple attaches to standard electrical enclosures via 1/2 inch knockouts
• Installation in junction box not required
• Qualifies for ARRA-funded public works projects

• Can be used in conjunction with the following dimmer(s) and switch(es): Maestro®, Maestro IR®, Maestro Wireless®, Pico™ wireless control, Spacer System®, Diva®, Lyneo® Lx, Skylark®, Skylark Contour™
• All Lutron® wallplates are screwless, seamless and have no visible hardware; the front plate securely snaps into the alignment adapter plate
• Full line of wiring devices in designer style opening
• Blank inserts available for Gloss colors (DV-BI-) and Satin colors (SC-BI-)
• Customize your designer wallplate with engraving

This is the Satin Wallplate 2-Gang. Check out the RadioRA 2 products page here.

• Can be used in conjunction with the following dimmer(s) and switch(es): Maestro®, Maestro IR®, Maestro Wireless®, Pico™ wireless control, Spacer System®, Diva®, Lyneo® Lx, Skylark®, Skylark Contour™
• All Lutron® wallplates are screwless, seamless and have no visible hardware; the front plate securely snaps into the alignment adapter plate
• Full line of wiring devices in designer style opening
• Blank inserts available for Gloss colors and Satin colors
• Customize your designer wallplate with engraving

This is the Satin Wallplate 3-Gang. Check out the RadioRA 2 products page here.

• Can be used in conjunction with the following dimmer(s) and switch(es): Maestro®, Maestro IR®, Maestro Wireless®, Pico™ wireless control, Spacer System®, Diva®, Lyneo® Lx, Skylark®, Skylark Contour™
• All Lutron® wallplates are screwless, seamless and have no visible hardware; the front plate securely snaps into the alignment adapter plate
• Full line of wiring devices in designer style opening
• Blank inserts available for Gloss colors and Satin colors
• Customize your designer wallplate with engraving

This is the Satin Wallplate 4-Gang. Check out the RadioRA 2 products page here.

• Can be used in conjunction with the following dimmer(s) and switch(es): Maestro®, Maestro IR®, Maestro Wireless®, Pico™ wireless control, Spacer System®, Diva®, Lyneo® Lx, Skylark®, Skylark Contour™
• All Lutron® wallplates are screwless, seamless and have no visible hardware; the front plate securely snaps into the alignment adapter plate
• Full line of wiring devices in designer style opening
• Blank inserts available for Gloss colors and Satin colors
• Customize your designer wallplate with engraving

This is the Satin Wallplate 5-Gang. Check out the RadioRA 2 products page here.

• Can be used in conjunction with the following dimmer(s) and switch(es): Maestro®, Maestro IR®, Maestro Wireless®, Pico™ wireless control, Spacer System®, Diva®, Lyneo® Lx, Skylark®, Skylark Contour™
• All Lutron® wallplates are screwless, seamless and have no visible hardware; the front plate securely snaps into the alignment adapter plate
• Full line of wiring devices in designer style opening
• Blank inserts available for Gloss colors and Satin colors
• Customize your designer wallplate with engraving

• Multi-gang dimmer installations may require derating
• Stainless Steel finish wallplates include black plastic trim/adapter, visible from side. Match with separate Black (BL) or Midnight (MN) controls and accessories

This is the Touchscreen Multi-function switch.

• Configurable Touch-Screen Wall Stations are Liquid Crystal Displays (LCD) with touch-screen interfacing.
• Each switch is configurable with up to six buttons per page and up to six pages per switch.
• Multiple button “types” are available including scene buttons, momentary buttons, timer buttons, and toggle buttons.
• Switches are fully integrated with other components of the system to properly display the current state of the lighting in the controlled area.
• All power and communication is done through a low voltage Cat5 daisy-chained cable.