1

MS-OPS5M-XX – MAESTRO PASSIVE INFRARED OCCUPANCY SENSOR SWITCH 5A

MAESTRO PASSIVE INFRARED OCCUPANCY SENSOR SWITCH 5A
  • Passive infrared sensors with exclusive Lutron XCT Technology for fine motion detection
  • 180° sensor field-of-view
  • Occupancy version can be set to Auto-ON/Auto-OFF or Manual-ON/Auto-OFF
  • Occupancy sensing switch loads: incandescent, halogen, ELV, MLV, CFL, LED, magnetic fluorescent, electronic fluorescent, and fan



MS-OPS6-DDV-XX – MAESTRO 2-CIRCUIT PASSIVE INFRARED SENSOR

MAESTRO 2-CIRCUIT PASSIVE INFRARED SENSOR
  • Passive infrared sensor with exclusive Lutron XCT Technology for minor motion detection
  • 180° sensor field-of-view
  • Tamper-resistant PIR lens
  • Smart Ambient Light Detection (ALD) mode uses adaptive algorithm: Sensor learns the user’s preferred light level over time.
  • Single-pole only.



MS-OPS6M2-DV-XX – MAESTRO PIR OCCUPANCY SENSOR DUAL VOLTAGE SWITCH 6A

MAESTRO PIR OCCUPANCY SENSOR DUAL VOLTAGE SWITCH 6A
  • Passive infrared sensors with exclusive Lutron XCT Technology for fine motion detection
  • 180° sensor field-of-view
  • Occupancy version can be set to Auto-ON/Auto-OFF or Manual-ON/Auto-OFF
  • Occupancy sensing switch loads: incandescent, halogen, ELV, MLV, CFL, LED, magnetic fluorescent, electronic fluorescent, and fan



MS-VPS2-XX – MAESTRO PASSIVE INFRARED VACANCY DUAL VOLTAGE SWITCH 2A

MAESTRO PASSIVE INFRARED VACANCY DUAL VOLTAGE SWITCH 2A
  • Passive infrared sensors with exclusive Lutron XCT Technology for fine motion detection
  • 180° sensor field-of-view
  • Occupancy version can be set to Auto-ON/Auto-OFF or Manual-ON/Auto-OFF
  • Occupancy sensing switch loads: incandescent, halogen, ELV, MLV, CFL, LED, magnetic fluorescent, electronic fluorescent, and fan



MS-VPS5M-XX – MAESTRO PASSIVE INFRARED VACANCY DUAL VOLTAGE SWITCH 5A

MAESTRO PASSIVE INFRARED VACANCY DUAL VOLTAGE SWITCH 5A
  • Passive infrared sensors with exclusive Lutron XCT Technology for fine motion detection
  • 180° sensor field-of-view
  • Occupancy version can be set to Auto-ON/Auto-OFF or Manual-ON/Auto-OFF
  • Occupancy sensing switch loads: incandescent, halogen, ELV, MLV, CFL, LED, magnetic fluorescent, electronic fluorescent, and fan



MS-VPS6M2-DV-XX – MAESTRO PASSIVE INFRARED VACANCY DUAL VOLTAGE SWITCH 6A

MAESTRO PASSIVE INFRARED VACANCY DUAL VOLTAGE SWITCH 6A
  • Passive infrared sensors with exclusive Lutron XCT Technology for fine motion detection
  • 180° sensor field-of-view
  • Occupancy version can be set to Auto-ON/Auto-OFF or Manual-ON/Auto-OFF
  • Occupancy sensing switch loads: incandescent, halogen, ELV, MLV, CFL, LED, magnetic fluorescent, electronic fluorescent, and fan



MS-Z101-V-XX – MAESTRO VACANCY ONLY LOW VOLT DIMMER SENSOR

MAESTRO VACANCY ONLY LOW VOLT DIMMER SENSOR
  • Controls 0-10 VDC electronic fluorescent ballasts or LED driver load types
  • Passive infrared motion detection with exclusive Lutron XCT Technology for fine motion detection
  • 180° sensor field-of-view
  • Occupancy version can be set to auto-on/auto-off or manual-on/auto-off
  • Adjustable sensitivity level: High, Med, Low, Min
  • Off warning fades lights to off over a period of 10 seconds



MS-Z101-XX – MAESTRO OCCUPANCY / VACANCY LOW VOLT DIMMER SENSOR

MAESTRO OCCUPANCY / VACANCY LOW VOLT DIMMER SENSOR
  • Controls 0-10 VDC electronic fluorescent ballasts or LED driver load types
  • Passive infrared motion detection with exclusive Lutron XCT Technology for fine motion detection
  • 180° sensor field-of-view
  • Occupancy version can be set to auto-on/auto-off or manual-on/auto-off
  • Adjustable sensitivity level: High, Med, Low, Min
  • Off warning fades lights to off over a period of 10 seconds



MSCL-OP153M-XX – MAESTRO OCCUPANCY / VACANCY SENSOR W/ DIMMER

MAESTRO OCCUPANCY / VACANCY SENSOR W/ DIMMER
  • Controls CFL, LED, incandescent, and halogen load types
  • Passive infrared motion detection with exclusive Lutron XCT Technology for fine motion detection
  • 180˚ sensor field-of-view
  • Occupancy version can be set to auto-on/auto-off or manual-on/auto-off



MSCL-VP153M-XX – MAESTRO VACANCY ONLY C•L DIMMER

MAESTRO VACANCY ONLY C•L DIMMER
  • Controls CFL, LED, incandescent, and halogen load types
  • Passive infrared motion detection with exclusive Lutron XCT Technology for fine motion detection
  • 180˚ sensor field-of-view
  • Occupancy version can be set to auto-on/auto-off or manual-on/auto-off



PW-301 – PASSIVE INFRARED WALL SWITCH OCCUPANCY SENSOR

PASSIVE INFRARED WALL SWITCH OCCUPANCY SENSOR, LIGHTING CONTROLS

This is the passive infrared wall switch occupancy sensor. The PW-301 passive infrared (PIR) wall switch sensor can turn lights OFF and ON based on occupancy. It is characterized by high sensitivity to small and large movements, appealing aesthetics, and a variety of features. The PW-301 replaces existing wall switches and installs in a single gang junction box with or without either neutral wiring. Factory default operation is for Manual-ON, so that users turn lights on only when needed. It uses advanced PIR technology to detect occupancy and keep lighting ON when it is needed. Once the space is vacated and the time delay elapses, lights automatically turn OFF. DIP switch settings allow for a variety of control options such as Auto-ON operation, walk-through and test modes. Multiple sensors may be used for control of one or more loads from up to four locations. The PW-301 sensor uses a patent pending Neutral Sense Technology. Any PW-301 sensor can be used for a two-wire or three wire application, either to work with existing wiring, or to meet local or national code requirements. An easy-to-break plastic tab covers neutral screw terminals. Once the sensor is connected to neutral it complies with all codes that restrict current leakage to ground. Check out Wattstopper DLM products here.

  • Complies with 2011 NEC requirements
  • Zero-crossing for long relay life
  • Vandal resistant lens combines precise coverage with durability
  • Selectable walk-through mode turns lights off three minutes after the room is initially occupied if no motion is detected after the first 30 seconds
  • Test mode allows quick and easy adjustments
  • Selectable audible and/or visual alerts for impending shutoff
  • LED indicates occupancy detection
  • In automatic mode, sensor returns automatically to Auto-ON after lights are turned off manually; ideal for presentations
  • Optional light level sensing with simple setup
  • Service mode allows sensor to operate as a service switch in the unlikely event of a failure
  • Sensor coverage tested to NEMA Guide Publication WD 7-2000
  • Compatible with decorator wall plates



PW-302 – PASSIVE INFRARED DUAL RELAY WALL SWITCH OCCUPANCY SENSOR

PASSIVE INFRARED WALL SWITCH OCCUPANCY SENSOR, LIGHTING CONTROLS

This is the passive infrared dual relay wall switch occupancy sensor. The PW-302 passive infrared (PIR) wall switch sensor turns lights ON and OFF based on occupancy. It contains two relays for controlling two independent lighting loads or circuits, and a variety of features. The PW-302 replaces existing wall switches and installs in a single gang junction box with or without either neutral wiring. Each of the PW-302’s relays can control a separate lighting load. The device uses advanced PIR technology to detect occupancy and turn the first relay ON. The other relay must be manually engaged to turn remaining lights on. Once the space is vacated and the time delay elapses, all lights automatically turn OFF. Dual ON/OFF buttons allow the user to manually turn on and off each of the loads. DIP switch settings allow for a variety of control options such as Manual-ON or Auto-ON for each relay, walk-through and test modes. Multiple sensors may be used for control of one or more loads from up to four locations. The PW-302 sensor uses a patent pending Neutral Sense Technology. Any PW-302 sensor can be used for a two-wire or three wire application, either to work with existing wiring, or to meet local or national code requirements. An easy-to-break plastic tab covers neutral screw terminals. Once the sensor is connected to neutral it complies with all codes that restrict current leakage to ground. Check out Wattstopper DLM products here.

  • Complies with 2011 NEC requirements
  • Zero-crossing on both relays for long relay life
  • Vandal resistant lens combines precise coverage with durability
  • Selectable walk-through mode turns lights off three minutes after the room is initially occupied if no motion is detected after the first 30 seconds
  • Test mode allows quick and easy adjustments
  • LED indicates occupancy detection
  • Selectable audible and/or visual alerts for impending shutoff
  • In automatic mode, sensor returns automatically to Auto-ON after lights are turned off manually; ideal for presentations
  • Optional light level sensor holds secondary lights off when ambient lighting is above the preset level
  • Service mode allows sensor to operate as a service switch in the unlikely event of a failure
  • Sensor coverage tested to NEMA Guide Publication WD 7-2000
  • Compatible with decorator wall plates