This is the PIR multi-way wall switch occupancy sensor. The RH-250 Passive Infrared (PIR) Multi-way Occupancy Sensor provides automatic lighting shutoff for a variety of applications including those with multiple switch locations. It offers optional automatic lighting activation. The RH-250 operates either as a manual- or automatic-on sensor. When in manual-on mode, users must press the pushbutton to turn on lighting. The RH-250 employs PIR technology to sense the difference between the infrared energy from a person in motion and the background space. It keeps lighting on as long as motion is detected and provides automatic shutoff, following a user-selected time delay, when motion is no longer detected. Users may turn the lighting off manually. When automatic-on operation has been selected, the adjustable light level sensor may be set to prevent lights from turning on automatically if sufficient daylight is present.

An RH-250 connected to other RH-250s and/or RH-253 Decorator Single Pole Momentary Switches provides true multi-way on/off control. An occupant simply presses the on/ off pushbutton of any connected device to turn on the lighting. Lights remain on as long as one of the RH-250s continues to detect occupancy. The user may turn off the lighting by pressing the on/off button on any of the connected devices. If the room becomes vacant and lights are on, they will be switched off automatically following the time delay of the last RH-250 to detect occupancy. Check out Wattstopper DLM products here.

• Complies with 2011 NEC requirements
• Replaces single- or multi-pole switches
• Provides multi-way control when used with other RH-250s or RH-253s
• Adjustable time delay, 15 seconds to 30 minutes
• Lighted switch for visibility in darkened rooms
• If enabled, light level sensing prevents automatic-on when adequate daylight exists
• Low-profile styling
• Choice of five decorator colors; lens is color-matched to device
• Operates most common types of lighting
• Relay-based switching
• No current leakage to load in off mode for safety
• Compatible with decorator wall plates
• Compliant with Nonresidential CA Title 24 requirements

WS-CaseStudy-GreenHome_OccupancyVacancyTimeswitches

This is the decorator single pole momentary switch. The RH-253 is a single pole momentary switch for on/off control. It is typically used with multi-way occupancy and vacancy sensors for applications requiring multiple switch locations. Users tap the switch to turn connected lighting on or off. The RH-253 provides true multi-way on/off control when connected to one or more CH-250, CU-250, CD-250, RH-250 or RD-250 wall switch sensors. Check out Wattstopper DLM products here.

• Replaces three-way or four-way switches when used with multi-way sensors
• Works with CH-250, CU-250 and RH-250 sensors and CD-250 and RD-250 sensor dimmers.
• Low-profile styling
• Choice of five decorator colors
• Compatible with decorator wall plates

WS-CaseStudy-GreenHome_OccupancyVacancyTimeswitches

This is the RadioRA 2 RF plugin dimming module. RadioRA 2 RF Plug-in Modules are simple to install and easy to use. RF Plug-in Modules allow floor and table lamps (RR-3PD-1) as well as general purpose switching loads (RR-15APS-1) to be added to a system quickly and easily using Clear Connect RF Technology. They can be hidden behind furniture or appliances. The RadioRA 2 Dimming Module (RR-3PD-1) functions much like standard lamp dimmers, but also incorporates advanced features such as fade on/fade off, delayed long fade off, and rapid full on. Check out the RadioRA 2 products page here.

• On a single-tap of the toggle button, lights fade ON or OFF.
• On a double-tap of the toggle button, lights go to full ON.
• When ON, press and hold the toggle button to engage the delayed long fade to OFF.
• Light levels can be fine-tuned by pressing and holding the raise/lower buttons until the desired light level is reached.
• Control non-dimmable lighting loads in switching mode.

This is the RadioRA 2 maestro local control dimmer. RadioRA 2 Maestro local controls function much like standard dimmers and switches, but can be controlled as part of a lighting control system. Local lighting controls are useful in locations where single circuits of lighting need to be dimmed or switched. RadioRA 2 Maestro dimmers incorporate advanced features such as fade on/fade off, delayed long fade to off, and rapid full on. RadioRA 2 Maestro local controls include a Front Accessible Service Switch (FASSTM) for safe lamp replacement. RadioRA 2 Maestro local controls install in single-pole or multi-location applications. Remote dimmers / switches are available for multi-location control. Use Lutron® Designer (Claro® or Satin Colors®) wallplates or designer-style wallplates from other manufacturers. Wallplates are sold separately. Lutron Claro and Satin Colors wallplates snap on with no visible means of attachment. RadioRA 2 Maestro local controls support color change kits. Check out the RadioRA 2 products page here.

• On a single-tap, lights fade ON or OFF.
• On a double-tap, lights go to full ON.
• When ON, press and hold the tapswitch to engage the delayed long fade to OFF.
• Light levels can be fine-tuned by pressing and holding the dimming rocker until the desired light level is reached.
• Neutral and two-wire dimmers available.

This is the RadioRA 2 maestro local control dimmer. RadioRA 2 Maestro local controls function much like standard dimmers and switches, but can be controlled as part of a lighting control system. Local lighting controls are useful in locations where single circuits of lighting need to be dimmed or switched. RadioRA 2 Maestro dimmers incorporate advanced features such as fade on/fade off, delayed long fade to off, and rapid full on. RadioRA 2 Maestro local controls include a Front Accessible Service Switch (FASSTM) for safe lamp replacement. RadioRA 2 Maestro local controls install in single-pole or multi-location applications. Remote dimmers / switches are available for multi-location control. Use Lutron® Designer (Claro® or Satin Colors®) wallplates or designer-style wallplates from other manufacturers. Wallplates are sold separately. Lutron Claro and Satin Colors wallplates snap on with no visible means of attachment. RadioRA 2 Maestro local controls support color change kits. Check out the RadioRA 2 products page here.

• On a single-tap, lights fade ON or OFF.
• On a double-tap, lights go to full ON.
• When ON, press and hold the tapswitch to engage the delayed long fade to OFF.
• Light levels can be fine-tuned by pressing and holding the dimming rocker until the desired light level is reached.
• Neutral and two-wire dimmers available.

This is the RadioRA 2 lamp dimmer. RadioRA 2 Lamp Dimmers function much like standard lamp dimmers, but can be controlled as part of a lighting control system. Lamp Dimmers are useful in locations where plug-in lamps need to be dimmed or non-dimmable lighting loads need to be switched. RadioRA 2 Lamp Dimmers incorporate advanced features such as fade on/fade off, delayed long fade off, and rapid full on. RadioRA 2 Lamp Dimmers are simple to install and easy to use. Lamp Dimmers allow floor and table lamps to be added to a system quickly and easily. Check out the RadioRA 2 products page here.

• On a single-tap, lights fade ON or OFF.
• On a double-tap, lights go to full ON.
• When ON, press and hold to engage the delayed long fade to OFF.
• Light levels can be fine-tuned by pressing and holding the dimming rocker until the desired light level is reached.
• Control non-dimmable lighting loads in switching mode.

This is the RadioRA 2 maestro local controls adaptive dimmer. RadioRA 2 Maestro local controls function much like standard dimmers and switches, but can be controlled as part of a lighting control system. Local lighting controls are useful in locations where single circuits of lighting need to be dimmed or switched. RadioRA 2 Maestro dimmers incorporate advanced features such as fade on/fade off, delayed long fade to off, and rapid full on. RadioRA 2 Maestro local controls include a Front Accessible Service Switch (FASSTM) for safe lamp replacement. RadioRA 2 Maestro local controls install in single-pole or multi-location applications. Remote dimmers / switches are available for multi-location control. Use Lutron® Designer (Claro® or Satin Colors®) wallplates or designer-style wallplates from other manufacturers. Wallplates are sold separately. Lutron Claro and Satin Colors wallplates snap on with no visible means of attachment. RadioRA 2 Maestro local controls support color change kits. Check out the RadioRA 2 products page here.

• On a single-tap, lights fade ON or OFF.
• On a double-tap, lights go to full ON.
• When ON, press and hold the tapswitch to engage the delayed long fade to OFF
• Light levels can be fine-tuned by pressing and holding the dimming rocker until the desired light level is reached
• Neutral and two-wire dimmers available

This is the RadioRA 2 wall-mount designer keypad. RadioRA 2 wall-mount designer keypads provide homeowners with a simple and elegant way to operate lights, shades/draperies, motorized screens, and many other devices. RadioRA 2 keypads feature large, easy-to-use buttons, plus a unique backlit engraving option that makes the keypads readable any time of the day or night. The keypad buttons are rounded, allowing engraving to be displayed at an upward angle, increasing readability. Check out the RadioRA 2 products page here.

• At the press of a single button, lights fade ON or OFF to desired levels and shades/draperies open or close to desired positions.
• Light levels and shade/drapery positions can be fine-tuned by pressing and holding the raise/lower buttons.
• Programmable to select scene or room preset levels or positions.
• Adjustable backlight intensity.
• IR receivers at the front (-W5BRLIR only) and back (all models) of the keypad allow for the use of an IR remote for line-of-sight operation (front) or IR repeater kit integration (back). Design Features
• Use an IR remote to select the same programmed rooms, scenes, and raise/lower buttons as the keypad (-W5BRLIR only).
• Configurable Raise/Lower selection – Last button or IR room/ scene (default) – devices controlled by the last button pressed or last IR room/ scene selected will raise/lower. – Double-tap – devices controlled by a double-tapped button will raise/lower.
• Prepaid engraving included. Redeemable for one engraved Replacement Kit.

This is the RadioRA 2 wall-mount designer keypad. RadioRA 2 wall-mount designer keypads provide homeowners with a simple and elegant way to operate lights, shades/draperies, motorized screens, and many other devices. RadioRA 2 keypads feature large, easy-to-use buttons, plus a unique backlit engraving option that makes the keypads readable any time of the day or night. The keypad buttons are rounded, allowing engraving to be displayed at an upward angle, increasing readability. Check out the RadioRA 2 products page here.

• At the press of a single button, lights fade ON or OFF to desired levels and shades/draperies open or close to desired positions.
• Light levels and shade/drapery positions can be fine-tuned by pressing and holding the raise/lower buttons.
• Programmable to select scene or room preset levels or positions.
• Adjustable backlight intensity.
• IR receivers at the front (-W5BRLIR only) and back (all models) of the keypad allow for the use of an IR remote for line-of-sight operation (front) or IR repeater kit integration (back). Design Features
• Use an IR remote to select the same programmed rooms, scenes, and raise/lower buttons as the keypad (-W5BRLIR only).
• Configurable Raise/Lower selection – Last button or IR room/ scene (default) – devices controlled by the last button pressed or last IR room/ scene selected will raise/lower. – Double-tap – devices controlled by a double-tapped button will raise/lower.
• Prepaid engraving included. Redeemable for one engraved Replacement Kit.

This is the RadioRA 2 wall-mount designer keypad. RadioRA 2 wall-mount designer keypads provide homeowners with a simple and elegant way to operate lights, shades /draperies, motorized screens, and many other devices. RadioRA 2 keypads feature large, easy-to-use buttons, plus a unique backlit engraving option that makes the keypads readable any time of the day or night. The keypad buttons are rounded, allowing engraving to be displayed at an upward angle, increasing readability. Check out the RadioRA 2 products page here.

• At the press of a single button, lights fade ON or OFF to desired levels and shades/draperies open or close to desired positions.
• Light levels and shade/drapery positions can be fine-tuned by pressing and holding the raise/lower buttons.
• Programmable to select scene or room preset levels or positions.
• Adjustable backlight intensity.
• IR receivers at the front (-W5BRLIR only) and back (all models) of the keypad allow for the use of an IR remote for line-of-sight operation (front) or IR repeater kit integration (back). Design Features
• Use an IR remote to select the same programmed rooms, scenes, and raise/lower buttons as the keypad (-W5BRLIR only).
• Configurable Raise/Lower selection – Last button or IR room/ scene (default) – devices controlled by the last button pressed or last IR room/ scene selected will raise/lower. – Double-tap – devices controlled by a double-tapped button will raise/lower.
• Prepaid engraving included. Redeemable for one engraved Replacement Kit.

This is the RadioRA 2 wall-mount designer keypad. RadioRA 2 wall-mount designer keypads provide homeowners with a simple and elegant way to operate lights, shades /draperies, motorized screens, and many other devices. RadioRA 2 keypads feature large, easy-to-use buttons, plus a unique backlit engraving option that makes the keypads readable any time of the day or night. The keypad buttons are rounded, allowing engraving to be displayed at an upward angle, increasing readability. Check out the RadioRA 2 products page here.

• At the press of a single button, lights fade ON or OFF to desired levels and shades/draperies open or close to desired positions.
• Light levels and shade/drapery positions can be fine-tuned by pressing and holding the raise/lower buttons.
• Programmable to select scene or room preset levels or positions.
• Adjustable backlight intensity.
• IR receivers at the front (-W5BRLIR only) and back (all models) of the keypad allow for the use of an IR remote for line-of-sight operation (front) or IR repeater kit integration (back). Design Features
• Use an IR remote to select the same programmed rooms, scenes, and raise/lower buttons as the keypad (-W5BRLIR only).
• Configurable Raise/Lower selection – Last button or IR room/ scene (default) – devices controlled by the last button pressed or last IR room/ scene selected will raise/lower. – Double-tap – devices controlled by a double-tapped button will raise/lower.
• Prepaid engraving included. Redeemable for one engraved Replacement Kit.

This is the RadioRA 2 wall-mount designer keypad. RadioRA 2 wall-mount designer keypads provide homeowners with a simple and elegant way to operate lights, shades/draperies, motorized screens, and many other devices. RadioRA 2 keypads feature large, easy-to-use buttons, plus a unique backlit engraving option that makes the keypads readable any time of the day or night. The keypad buttons are rounded, allowing engraving to be displayed at an upward angle, increasing readability. Check out the RadioRA 2 products page here.

• At the press of a single button, lights fade ON or OFF to desired levels and shades/draperies open or close to desired positions.
• Light levels and shade/drapery positions can be fine-tuned by pressing and holding the raise/lower buttons.
• Programmable to select scene or room preset levels or positions.
• Adjustable backlight intensity.
• IR receivers at the front (-W5BRLIR only) and back (all models) of the keypad allow for the use of an IR remote for line-of-sight operation (front) or IR repeater kit integration (back). Design Features
• Use an IR remote to select the same programmed rooms, scenes, and raise/lower buttons as the keypad (-W5BRLIR only).
• Configurable Raise/Lower selection – Last button or IR room/ scene (default) – devices controlled by the last button pressed or last IR room/ scene selected will raise/lower. – Double-tap – devices controlled by a double-tapped button will raise/lower.
• Prepaid engraving included. Redeemable for one engraved Replacement Kit.