1

CAR-20-DDTR-XX – Dual Dimming Tamper Resistant Receptacles and Plug 20 A

|
Dual Dimming Tamper Resistant Receptacles and Plug 20 A
  • Permanently installed internal tamper resistant shutter mechanism capable of resisting insertion of foreign elements into the device
  • Back wire installation capable
  • Plug may be used with standard receptacles and with new receptacles designed for dimming use
  • Plug uses split-shell design for easy wiring and the ability to control cord exit direction


CW-1-XX – CLARO WALLPLATE 1-GANG

|
CLARO WALLPLATE 1-GANG
  • Can be used in conjunction with the following dimmer(s) and switch(es): Maestro®, Maestro IR®, Maestro Wireless®, Pico™ wireless control, Spacer System®, Diva®, Lyneo® Lx, Skylark®, Skylark Contour™
  • All Lutron® wallplates are screwless, seamless and have no visible hardware; the front plate securely snaps into the alignment adapter plate
  • Full line of wiring devices in designer style opening
  • Blank inserts available for Gloss colors and Satin colors
  • Customize your designer wallplate with engraving


CW-2-XX – CLARO WALLPLATE 2-GANG

|
CLARO WALLPLATE 2-GANG
  • Can be used in conjunction with the following dimmer(s) and switch(es): Maestro®, Maestro IR®, Maestro Wireless®, Pico™ wireless control, Spacer System®, Diva®, Lyneo® Lx, Skylark®, Skylark Contour™
  • All Lutron® wallplates are screwless, seamless and have no visible hardware; the front plate securely snaps into the alignment adapter plate
  • Full line of wiring devices in designer style opening
  • Blank inserts available for Gloss colors (DV-BI-) and Satin colors (SC-BI-)
  • Customize your designer wallplate with engraving


CW-3-XX – CLARO WALLPLATE 3-GANG

|
CLARO WALLPLATE 3-GANG, LIGHTING CONTROLS

This is the Claro Wallplate 3-Gang. Check out the RadioRA 2 products page here.

  • Can be used in conjunction with the following dimmer(s) and switch(es): Maestro®, Maestro IR®, Maestro Wireless®, Pico™ wireless control, Spacer System®, Diva®, Lyneo® Lx, Skylark®, Skylark Contour™
  • All Lutron wallplates are screwless, seamless and have no visible hardware; the front plate securely snaps into the alignment adapter plate
  • Full line of wiring devices in designer style opening
  • Blank inserts available for Gloss colors and Satin colors
  • Customize your designer wallplate with engraving
  • More finishes available. Please contact us for pricing


CW-4-XX – CLARO WALLPLATE 4-GANG

|
CLARO WALLPLATE 4-GANG, LIGHTING CONTROLS

This is the Claro Wallplate 4-Gang. Check out the RadioRA 2 products page here.

  • Can be used in conjunction with the following dimmer(s) and switch(es): Maestro®, Maestro IR®, Maestro Wireless®, Pico™ wireless control, Spacer System®, Diva®, Lyneo® Lx, Skylark®, Skylark Contour™
  • All Lutron® wallplates are screwless, seamless and have no visible hardware; the front plate securely snaps into the alignment adapter plate
  • Full line of wiring devices in designer style opening
  • Blank inserts available for Gloss colors and Satin colors
  • Customize your designer wallplate with engraving


CW-6-XX – Claro Wallplate 6-Gang

|
Claro Wallplate 6-Gang


DIM1-2W/3W-120/277 – LINE VOLTAGE & 3-WIRE DIMMING MODULE

|
LINE VOLTAGE & 3-WIRE DIMMING MODULE, LIGHTING CONTROLS

This is the Line Voltage & 3-Wire Dimming Module.

  • Software configurable for either forward or reverse phase control.
  • Utilize a relay ahead of the dimmer for complete disconnection from the source voltage when the dimmer is off.
  • Dimming Modules are completely compatible with 3-wire fluorescent dimming ballasts (Hot, Dimmed Hot and Neutral).
  • Dimming Modules communicate with the Building Management Server to report:
    • The dimmer’s current dimming level (0-100% on)
    • The line source state (available or off)
    • The communication status (active / not available)
    • The module’s “health” (if the module is defective)


FP-G1 – 1-GANG DECORATOR-STYLE FACEPLATE

|
1-GANG DECORATOR-STYLE FACEPLATE, LIGHTING CONTROLS

This is the 1-gang decorator-style faceplate. The FP-G line of decorator-style faceplates from Crestron® is available in several designer colors with a smooth or textured finish. The faceplates are offered in 1-gang, 2-gang, 3-gang, and 4-gang styles to suit every installation need. Check out the Züm by Crestron products here.



GRX-CBL-346S-500 – 500 ft GRX 3000/HOME WORKS CTRL CABLE

|
500 ft GRX 3000/HOME WORKS CTRL CABLE
  • Non-Plenum rated cable for use with the following Lutron systems
    • GRAFIK Eye ® 3000
    • GRAFIK Eye ® QS
    • Energi Savr Node TM


GRX-CBL-46L-250 – 250 ft GRAFIK 4000/6000 CTRL CABLE

|
250 ft GRAFIK 4000/6000 CTRL CABLE
  • Non-Plenum rated cable for use with the following Lutron systems
    • GRAFIK Eye ® 3000
    • GRAFIK Eye ® QS
    • Energi Savr Node TM


GRX-CBL-46L-500 – 500 ft GRAFIK 4000/6000 CTRL CABLE

|
500 ft GRAFIK 4000/6000 CTRL CABLE
  • Non-Plenum rated cable for use with the following Lutron systems
    • GRAFIK Eye ® 3000
    • GRAFIK Eye ® QS
    • Energi Savr Node TM


GRX-IT-WH – 4-Scene Wireless Remote Control Infrared Transmitter

|
4-Scene Wireless Remote Control Infrared Transmitter
  • Uses wireless infrared communications to select and adjust scenes.
  • Scene selection buttons select four scenes.
  • Off button turns all lights off.
  • Master raise/lower button brightens or dims all lighting zones.
  • Works with GRAFIK Eye 3000 and 4000 Series Control Units or any Wallstation with an infrared receiver.