This is the RadioRA 2 maestro local control dimmer. RadioRA 2 Maestro local controls function much like standard dimmers and switches, but can be controlled as part of a lighting control system. Local lighting controls are useful in locations where single circuits of lighting need to be dimmed or switched. RadioRA 2 Maestro dimmers incorporate advanced features such as fade on/fade off, delayed long fade to off, and rapid full on. RadioRA 2 Maestro local controls include a Front Accessible Service Switch (FASSTM) for safe lamp replacement. RadioRA 2 Maestro local controls install in single-pole or multi-location applications. Remote dimmers / switches are available for multi-location control. Use Lutron® Designer (Claro® or Satin Colors®) wallplates or designer-style wallplates from other manufacturers. Wallplates are sold separately. Lutron Claro and Satin Colors wallplates snap on with no visible means of attachment. RadioRA 2 Maestro local controls support color change kits. Check out the RadioRA 2 products page here.

• On a single-tap, lights fade ON or OFF.
• On a double-tap, lights go to full ON.
• When ON, press and hold the tapswitch to engage the delayed long fade to OFF.
• Light levels can be fine-tuned by pressing and holding the dimming rocker until the desired light level is reached.

This is the RadioRA 2 maestro local control dimmer. RadioRA 2 Maestro local controls function much like standard dimmers and switches, but can be controlled as part of a lighting control system. Local lighting controls are useful in locations where single circuits of lighting need to be dimmed or switched. RadioRA 2 Maestro dimmers incorporate advanced features such as fade on/fade off, delayed long fade to off, and rapid full on. RadioRA 2 Maestro local controls include a Front Accessible Service Switch (FASSTM) for safe lamp replacement. RadioRA 2 Maestro local controls install in single-pole or multi-location applications. Remote dimmers / switches are available for multi-location control. Use Lutron® Designer (Claro® or Satin Colors®) wallplates or designer-style wallplates from other manufacturers. Wallplates are sold separately. Lutron Claro and Satin Colors wallplates snap on with no visible means of attachment. RadioRA 2 Maestro local controls support color change kits. Check out the RadioRA 2 products page here.

• On a single-tap, lights fade ON or OFF.
• On a double-tap, lights go to full ON.
• When ON, press and hold the tapswitch to engage the delayed long fade to OFF.
• Light levels can be fine-tuned by pressing and holding the dimming rocker until the desired light level is reached.
• Neutral and two-wire dimmers available.

This is the RadioRA 2 maestro local control dimmer. RadioRA 2 Maestro local controls function much like standard dimmers and switches, but can be controlled as part of a lighting control system. Local lighting controls are useful in locations where single circuits of lighting need to be dimmed or switched. RadioRA 2 Maestro dimmers incorporate advanced features such as fade on/fade off, delayed long fade to off, and rapid full on. RadioRA 2 Maestro local controls include a Front Accessible Service Switch (FASSTM) for safe lamp replacement. RadioRA 2 Maestro local controls install in single-pole or multi-location applications. Remote dimmers / switches are available for multi-location control. Use Lutron® Designer (Claro® or Satin Colors®) wallplates or designer-style wallplates from other manufacturers. Wallplates are sold separately. Lutron Claro and Satin Colors wallplates snap on with no visible means of attachment. RadioRA 2 Maestro local controls support color change kits. Check out the RadioRA 2 products page here.

• On a single-tap, lights fade ON or OFF.
• On a double-tap, lights go to full ON.
• When ON, press and hold the tapswitch to engage the delayed long fade to OFF.
• Light levels can be fine-tuned by pressing and holding the dimming rocker until the desired light level is reached.
• Neutral and two-wire dimmers available.

WattStopper LMPS-104 PARTITION SWITCH. The LMPS-104 Partition Switch enables quick manual coordination of lighting controls in flexible spaces with up to four movable walls. It is part of a Digital Lighting Management (DLM) system, and can reconfigure connected switches and
occupancy sensors. The LMPS-104 may also be used as a status indicator when an LMIO-102 Digital Partition Interface is used for automatic coordination of controls.

The LMPS-104 operates on Class 2 power supplied to a DLM local network by one or more room controllers. Prior to operation, the user must establish load profiles for each possible configuration of the space, with up to four walls open and closed. Up to 16 load profiles may be configured using Push n’ Learn or other DLM configuration tools. When the walls in the controlled space are all closed, the user must toggle the
buttons so that all of the LEDs are on. When the controlled space is set up for a new function, the user toggles the buttons associated with each wall that has been opened so that the LED is off. Each different button combination recalls one of the 16 load profiles.

Features

• Hidden configuration button for easy access to Push n’ Learn™
• Digital Lighting Managment components plug together on a free-topology Category 5e DLM local network
• Infrared (IR) transceiver for wireless configuration and control
• Sleek single gang device fits decorator wall plates
• Each button represents one wall; LED indicates status (open or closed)
• Five color options and custom engraving options; standard buttons may be replaced in the field
• The product meets the materials restrictions of RoHS
• BAA/TAA-compliant models available

Benefits

Input voltage: 24VDC from DLM local network
• Current consumption: 5mA
• DLM local network connection: 2 RJ45 ports
• 4 control buttons, each with LED status indicator
• Hidden configuration button to access Push n’ Learn
• Infrared (IR) transceiver
• Operating conditions: for indoor use only; 131°F (0-55°C); 5-95% RH, non-condensing
• UL and cUL listed
• FCC part 15 compliant
• Five year warranty

For other items like the WattStopper CS-350-N PIR Dual Relay Sensor click here.

For more information on WattStopper’s line of lighting control solutions click here.