THIS PRODUCT HAS BEEN DISCONTINUED

This is the RadioRA 2 remote dimmer. Check out the RadioRA 2 products page here.

• RadioRA 2 Maestro dimmers incorporate advanced features such as fade on/fade off, delayed long fade to off, and rapid full on.
• RadioRA 2 Maestro local controls include a Front Accessible Service Switch (FASS) for safe lamp replacement.
• Use Lutron Designer (Claro or Satin Colors) wallplates or designer-style wallplates from other manufacturers.

• On / off toggle switch with a captive linear-slide dimmer for a traditional wallplate opening
• HED Technology: Advanced Lutron dimming circuitry designed for compatibility with most high efficacy light bulbs
• UL Listed to control:
  •  Dimmable compact fluorescent load (CFL) with
    integrated ballast
  • Dimmable LED with integrated driver
  • Halogen
  • Incandescent

• On / off toggle switch with a captive linear-slide dimmer for a traditional wallplate opening
• HED Technology: Advanced Lutron dimming circuitry designed for compatibility with most high efficacy light bulbs
• UL Listed to control:
  •  Dimmable compact fluorescent load (CFL) with
    integrated ballast
  • Dimmable LED with integrated driver
  • Halogen
  • Incandescent

This is the Line Voltage & 3-Wire Dimming Module.

• Software configurable for either forward or reverse phase control.
• Utilize a relay ahead of the dimmer for complete disconnection from the source voltage when the dimmer is off.
• Dimming Modules are completely compatible with 3-wire fluorescent dimming ballasts (Hot, Dimmed Hot and Neutral).
• Dimming Modules communicate with the Building Management Server to report:
  • The dimmer’s current dimming level (0-100% on)
  • The line source state (available or off)
  • The communication status (active / not available)
  • The module’s “health” (if the module is defective)

• Large paddle switch with a captive linear-slide dimmer for a standard designer wallplate opening
• HED Technology: Advanced Lutron dimming circuitry designed for compatibility with most high efficacy light bulbs
•  ULR Listed to control:
  •  Dimmable compact fluorescent (CFL) with integrated ballast
  • Dimmable LED with integrated driver
  • Halogen
  • Incandescent

• Large paddle switch with a captive linear-slide dimmer for a standard designer wallplate opening
•  HED Technology: Advanced Lutron dimming circuitry designed for compatibility with most high efficacy light bulbs
• ULR Listed to control:
  • Dimmable compact fluorescent (CFL) with integrated ballast
  • Dimmable LED with integrated driver
  • Lutron Hi-lumeR A-Series LTE LED Driver
  • Halogen
  • Incandescent

This is the single zone switching & dimming closed loop digital photosensor. The LMLS-400 is a closed loop photo sensor that measures the ambient light level in order to automatically switch or dim one zone of lighting. It is part of a Digital Lighting Management (DLM) system and sends light level signals to control loads connected to DLM on/off or dimming room controllers. The LMLS-400 has a photodiode with an extended range of 1-6,553 foot-candles (fc), and photopic correction to mimic the human eye, for precise measurement of visible light. Check out Wattstopper DLM products here.

FEATURES:

• Digital Lighting Management components plug together on a free-topology Cat 5e DLM local network
• Test mode override of programmed time delay allows easy verification of selected settings
• Load status verification allows confirmation and testing of controlled load
• Infrared (IR) transceiver for wireless configuration and control
• Compatible with DLM wall switches for manual override, if desired
• LED status indicators
• Mounting options for hard ceilings, dropped ceilings and suspended lighting fixtures
• Complies with California Title 24, Section 119 requirements
• The product meets the materials restrictions of RoHS
• BAA/TAA-compliant models available

**See LMLS MB for mounting bracket options**

This is the digital forward phase dimming room controllers (LMRC-221, LMRC-222). LMRC-220 Series Digital Room Controllers include one or two output(s) to control a total of up to 20 amps. Load ratings include incandescent, magnetic low voltage, forward phase compatible electronic low voltage and LED drivers, neon and cold cathode, and dimmable two-wire and three-wire fluorescent ballasts. They are the foundation of a WattStopper Digital Lighting Management (DLM) system, and allow integration of occupancy sensors, daylighting controls and switches for energy-efficient lighting control. Check out Wattstopper DLM products here.

FEATURES:

• Plug n’ Go™ automatic configuration for quick installation and maximum energy savings
• Push n’ Learn™ functionality for personalization without the need for tools or a PC
• Digital Lighting Management components plug together on free-topology Cat 5e DLM local network
• On/Off/Dim local override button for each load
• LED indicates status of each load
• Integral current monitoring of total connected load
• Optional lamp burn in; 12 or 100 hours
• Square law, 2-wire and 3-wire fluorescent/LED curves
• 4 RJ45 ports with integral strain relief
• Zero-crossing circuitry for each relay for reliability and increased product life
• UL 2043 plenum rated
• RoHS compliant

This is the RadioRA 2 maestro local control dimmer. RadioRA 2 Maestro local controls function much like standard dimmers and switches, but can be controlled as part of a lighting control system. Local lighting controls are useful in locations where single circuits of lighting need to be dimmed or switched. RadioRA 2 Maestro dimmers incorporate advanced features such as fade on/fade off, delayed long fade to off, and rapid full on. RadioRA 2 Maestro local controls include a Front Accessible Service Switch (FASSTM) for safe lamp replacement. RadioRA 2 Maestro local controls install in single-pole or multi-location applications. Remote dimmers / switches are available for multi-location control. Use Lutron® Designer (Claro® or Satin Colors®) wallplates or designer-style wallplates from other manufacturers. Wallplates are sold separately. Lutron Claro and Satin Colors wallplates snap on with no visible means of attachment. RadioRA 2 Maestro local controls support color change kits. Check out the RadioRA 2 products page here.

• On a single-tap, lights fade ON or OFF.
• On a double-tap, lights go to full ON.
• When ON, press and hold the tapswitch to engage the delayed long fade to OFF.
• Light levels can be fine-tuned by pressing and holding the dimming rocker until the desired light level is reached.