WattStopper RD-200-W PASSIVE INFRARED (PIR) DIMMING WALL SWITCH VACANCY SENSOR. This is the Passive Infrared (PIR) Dimming Wall Switch Vacancy Sensor. The RD-200 PIR Dimming Wall Switch Vacancy Sensor provides preset dimming control and occupancy-based automatic lighting shutoff for applications throughout the home. The RD-200 can dim incandescent loads from a minimum level of 10% to a maximum level of 100%. When the pushbutton is pressed and held, the RD-200 will ramp the lights up and down in a continuous cycle until the pushbutton is released. The dimming direction may be reversed by momentarily releasing the pushbutton and then pressing it again.

• Replaces standard single pole switch or incandescent dimmer
• Low-profile styling
• Choice of four decorator colors; lens is color matched to device
• Includes matching single-gang wall plate
• Lighted pushbutton for visibility in darkened rooms
• Manual-on or automatic-on operation
• Adjustable time delay from 15 seconds to 30 minutes
• Soft start technology to prolong lamp life
• Air gap isolation switch for safe re-lamping
• If enabled, light level sensing prevents automatic-on when adequate daylight exists

For other items like the WattStopper RD-200-W PASSIVE INFRARED (PIR) DIMMING WALL SWITCH VACANCY SENSOR click here.

For more information on Wattstopper’s line of lighting solutions click here.

CHECK OUT THIS CASE STUDY

WS-CaseStudy-GreenHome_OccupancyVacancyTimeswitches

• Wall Occupancy Sensor with Soft Push Button and 0-10 Volt Dimming Capability
• Small Motion Detection up to 20 Ft
• Automatic On
• Integrated Photocell (disabled by default) prevents light from turning on if sufficient daylight is present – not available in Nightlight versions
• Push-button programmable without removing cover plate – adjustable time delays & operating modes
• Pre-configured for wiring without a neutral but is field configurable for code with neutral
• Applications: Small Offices, Small Rest Rooms, Closets, Small Enclosed Spaces
• Great for CA Title 24 Applications (Occupancy, Dimming, Daylight Harvesting)

• Wall Occupancy Sensor with Soft Push Button and 0-10 Volt Dimming Capability
• Passive Dual Technology (PDT) with Microphonics for Superior Detection
• Small Motion Detection up to 20 Ft
• Automatic On
• Integrated Photocell (disabled by default) prevents light from turning on if sufficient daylight is present – not available in Nightlight versions
• Push-button programmable without removing cover plate – adjustable time delays & operating modes
• Pre-configured for wiring without a neutral but is field configurable for code with neutral
• Applications: Small Offices, Small Rest Rooms, Closets, Small Enclosed Spaces