This is the 2 network bridge module DLM. The LMBC-300 Digital Network Bridge provides a segment network connection for a group of Digital Lighting Management (DLM) local network devices. This enables individual DLM local networks to be aggregated into a larger system, which, in turn, can be remotely managed from a DLM Segment Manager or a building automation system (BAS). Check out Wattstopper DLM products here.

FEATURES:

• Component of Digital Lighting Management integrated control systems
• Adds segment network functionality a to DLM local network
• Communicates all DLM local network data and device settings to a Segment Manager and/or LMCS software
• Easy integration with BAS through use of standard BACnet objects to represent DLM local network device settings and states
• Class 2 operation and plenum rated housing facilitate simple installation
• DIN rail mounting clamp provided with the unit to facilitate box or panel mounting
• UL 2043 plenum rated
• This product meets the materials restrictions of RoHS
• BAA/TAA-compliant models available

This is the dual technology wall switch. LMDW-100 Series Digital Dual Technology Wall Switch Occupancy Sensors use PIR and ultrasonic technology to detect occupancy for energy-efficient control of lighting and plug loads. They also include one or two switch buttons for manual control of selected loads, and are part of a Wattstopper Digital Lighting Management (DLM) system. Check out Wattstopper DLM products here.

FEATURES:

• Plug n’ Go™ automatic configuration for quick installation and maximum energy savings
• Push n’ Learn™ functionality for customization without the need for tools or a PC
• Infrared (IR) transceiver for wireless configuration and control
• Sleek single gang devices fit decorator wall plates; 1- and 2-button models; six color options
• Sensors may be used for multi-way control
• Each switch button can control individual or multiple loads, or one scene; LED indicates status
• Each switch button can be used to raise or lower load levels
• Detection Signature Processing eliminates false triggers and provides immunity to RFI and EMI
• Sensor coverage tested to NEMA Guide Publication WD 7-2000
• This product meets the materials restrictions of RoHS

This is the dual technology corner mount occupancy sensor. The LMDX-100 Digital Dual Technology Corner Mount Occupancy Sensor uses both passive infrared (PIR) and ultrasonic technologies to achieve precise occupancy sensing for energy-efficient control of lighting and plug loads. It is a digital sensor, and is part of a Wattstopper Digital Lighting Management (DLM) system. Check out Wattstopper DLM products here.

FEATURES:

• Plug n’ Go™ automatic configuration for quick installation and maximum energy savings
• Push n’ Learn™ functionality for customization without the need for tools or a PC
• Digital Lighting Management components plug together on a free-topology Category 5e DLM local network
• Infrared (IR) transceiver for wireless configuration and control
• Ultrasonic diffusion technology spreads coverage to a wider area (patented); 40KHz signal
• Detection Signature Processing eliminates false triggers and provides immunity to RFI and EMI
• Sensor coverage tested to NEMA Guide Publication WD 7-2000
• The product meets the materials restrictions of RoHS
• BAA/TAA-compliant models available

This is the multi-zone open loop digital photosensor. The LMLS-500 is an open loop, multi-zone photosensor that measures the daylight contribution in order to automatically switch or dim up to three zones of lighting. It is part of a Digital Lighting Management (DLM) system and sends light level signals to control loads connected to DLM on/off or dimming room controllers. The LMLS-500 has a photodiode with an extended range of 1-6, 553 footcandles (fc), and photopic correction to mimic the human eye, for precise measurement of visible light. Check out Wattstopper DLM products here.

FEATURES:

• Digital Lighting Management components plug together on a free-topology Cat 5e DLM local network
• Test mode override of programmed time delay allows easy verification of selected settings
• Load status verification allows confirmation and testing of controlled load
• Infrared (IR) transceiver for wireless configuration and control
• Compatible with DLM wall switches for manual override, if desired
• LED status indicators
• Mounting options for toplit or sidelit applications
• Complies with California Title 24, Section 119 requirements
• RoHS compliant
• Qualifies for ARRA-funded public works projects

This is the digital plug load room controller. LMPL-101 Plug Load Room Controllers include a 20-amp relay for on/off control of connected outlets, and a high-efficiency switching power supply. They are part of a WattStopper Digital Lighting Management (DLM) system, and enable energy efficient control of plug loads. Check out Wattstopper DLM products here.

FEATURES:

• Plug n’ Go™ automatic configuration for quick installation and maximum energy savings
• Push n’ Learn™ functionality for personalization without the need for tools or a PC
• Digital Lighting Management components plug together on a free-topology Cat 5e DLM local network
• Load On/Off button
• LED indicates status of connected load

This is the PIR corner mount occupancy sensor. The LMPX-100 Digital PIR Corner Mount Occupancy Sensor uses passive infrared (PIR) technology and one of four lenses to detect occupancy in different types of spaces for energy-efficient control of lighting and plug loads. It is a digital sensor, and is part of a Wattstopper Digital Lighting Management (DLM) system. Check out Wattstopper DLM products here.

FEATURES:

• Plug n’ Go™ automatic configuration for quick installation and maximum energy savings
• Push n’ Learn™ functionality for customization without the need for tools or a PC
• Digital Lighting Management components plug together on a free-topology Category 5e DLM local network
• Infrared (IR) transceiver for wireless configuration and control
• Detection Signature Processing eliminates false triggers and provides immunity to RFI and EMI
• Sensor coverage tested to NEMA Guide Publication WD 7-2000
• The product meets the materials restrictions of RoHS
• BAA/TAA-compliant models available

This is the 0-10 volt dimming room controller. LMRC-210 Series Digital Room Controllers include one, two or three relay(s) to switch a total of 15 or 20 amps, a high-efficiency switching power supply and one 0-10 volt output per relay for control of dimmable loads including electronic ballasts (Advance Mark 7, or equivalent). They are the foundation of a Wattstopper Digital Lighting Management (DLM) system, and allow integration of occupancy sensors, daylighting controls and switches for energy-efficient lighting control. Check out Wattstopper DLM products here.

FEATURES:

• Plug n’ Go™ automatic configuration for quick installation and maximum energy savings
• Push n’ Learn™ functionality for personalization without the need for tools or a PC
• Digital Lighting Management components plug together on a free-topology Cat 5e DLM local network
• On/Off/Dim local override button for each load
• LED indicates status of each load
• 0-10V signal opens on loss of LMRC power
• Integral current monitoring of total connected load
• Optional lamp burn in; 12 or 100 hours
• 4 RJ45 ports with integral strain relief
• Zero-crossing circuitry for each relay for reliability and increased product life
• UL 2043 plenum rated
• The product meets the materials restrictions of RoHS
• BAA/TAA-compliant models available

WattStopper ELCU-200 EMERGENCY LIGHTING CONTROL UNIT. WattStopper’s ELCU-200 Emergency Lighting Control Unit is a self-contained device that allows any standard lighting control device to control emergency lighting in conjunction with normal
lighting in any area within a building. The ELCU-200 monitors a single circuit that provides normal lighting to an area. As long as
normal power is present, the ELCU-200 permits lighting control devices (e.g., occupancy sensors, panels, dimmers, or wall switches) to control the emergency lighting fixtures as well as the general lighting. If power is lost for any reason, including the tripping of a single branch circuit breaker, the ELCU-200 will force on the emergency fixtures for that area. The ELCU-200 can be wired either as a control device, so that emergency lighting follows
the control of normal lighting, or as a bypass device to shunt emergency power around a control device (e.g., a dimmer) when normal power fails.

Features

• Eliminates energy waste caused by emergency lighting that is always on
• Integral push-to-test button activates emergency mode for a true test condition
• Connects to EMTS-100 Remote Test Switch or other input to activate emergency on from a remote location
• Operates as a control device or as a shunt
• Senses local single circuit power failure
• Zero cross switching technology for reliability and increased product life

• Compatible with WattStopper occupancy sensors, daylighting controls, lighting control panels, and dimmers
• LED indication for emergency and normal power
• Half-second delayed on positively identifies emergency fixtures for required maintenance
• Provides absolute fail-to-on emergency lighting
• UL924 listed, meets NEC, OSHA and NFPA safety codes; UL2043 plenum rated
• Qualifies for use on ARRA-funded projects

Specifications

• 120/277 VAC; 60Hz
• Maximum load:
– Ballast 20 A @ 120/277 VAC
– Incandescent 10 A @ 120 VAC
– Motor 1HP @ 120 VAC
• Remote activation: supplies 24 VDC source for dry contact closure
• Integral control: push-to-test button on unit
• Housing: fire rated V-0, 176° F (80°C)
• Operating temperature range: 32 to 131°F (0 to 55°C)
• Relative humidity range: 5 to 95%, noncondensing
• Dimensions: 1.7” x 2.97” x 1.64” (43.2mm x 75.4mm x 41.7mm) H x W x D with a 1/2“ (12.7mm) threaded nipple
• UL, cUL listed Emergency Lighting and Power Equipment; five year warranty

For other items like the WattStopper ELCU-200 EMERGENCY LIGHTING CONTROL UNIT click here.

For more information on WattStopper’s line of lighting control solutions click here.

WattStopper LMCT-100-2 DIGITAL WIRELESS CONFIGURATION TOOL. The LMCT-100-2 Wireless Configuration Tool is a handheld tool for advanced remote configuration of any Wattstopper Digital Lighting Management (DLM) system. The tool enables system and device modifications via pushbutton, without ladders or tools, as well as easy duplication of settings between DLM local networks.

Powered by three AAA batteries, the LMCT-100-2 features an
easy-to-read organic LED (OLED) screen and bi-directional
communication with IR-enabled DLM devices. Its intuitive
navigation pad provides a familiar interface for users who can
see the current system parameters of a DLM local network and
make changes by navigating through simple menus. Adjustable
occupancy sensor parameters include sensitivity, time delay
and trigger modes. Load parameter settings (also referred to
as Push n’ Learn™) include blink warning, Auto- or Manualon mode, and re-assigning specific loads to different sensors.
Button configuration options include type (load or scene), mode,
fade times and scene lock. Dimming parameters include low/
high trim, preset level and lamp burn in time. Daylighting
adjustments include operating mode, setpoints, fade times and
time delays. The LMCT is also used to adjust the light level of
dimmed loads. As new DLM products are released, a microUSB port allows for easy firmware updates via software

Features

• Remotely reconfigures and reports DLM occupancy sensor
parameters: PIR and ultrasonic sensitivity; time delay; walk through mode; trigger mode (for dual technology sensors)
• Remotely reconfigures and reports DLM dimming
parameters: load type (dim/switch); low/high trim; preset on
level; lamp burn-in
• Manually adjusts light level of dimmed loads to facilitate scene setting
• Remotely configures, reconfigures and reports DLM photosensor settings: light levels; operating mode (on/off, bi-level, tri-level, dimming); setpoints; time delays; fade times; test mode
• Micro-USB port provided for firmware updates, allowing easy
updates for support of new DLM products
• The product meets the materials restrictions of RoHS

Specifications

Three AAA 1.5 volt batteries (included)
• OLED display 1.4”W x .75”H (36mm x 19mm)
• Infrared (IR) transceiver (36kHz frequency)
• IR range: up to 32’ (10m)
• Mcro-USB port for firmware updating
• Includes carrying case with belt clip
• Operating temperature: 32-104°F (0-40°C)
• FCC part 15 compliant
• Five year warranty

For other items like the WattStopper LMCT-100-2 DIGITAL WIRELESS CONFIGURATION TOOL click here.

For more information on WattStopper’s line of lighting control solutions click here.

WattStopper LMDC-100 DUAL TECHNOLOGY CEILING MOUNT OCCUPANCY SENSOR. The LMDC-100 low profile Dual Technology Ceiling Mount Occupancy Sensor uses both passive infrared (PIR) and ultrasonic technologies to achieve precise occupancy sensing for energy-efficient control of lighting and plug loads. It is a digital sensor, and is part of a Wattstopper Digital Lighting Management (DLM) system.

The LMDC-100 operates on Class 2 power supplied to a DLM
local network by one or more DLM room controllers. It works
with the room controller(s) to turn loads on and off based on
occupancy. Default operation is established by Plug n’ Go, which
automatically configures system components to maximize
energy savings. Initially, all occupancy sensors control all loads
on the same local network. Each LMDC-100 may be assigned
to a specific load; load assignments and load parameters
may be changed using Push n’ Learn. The LMDC-100 may be
reconfigured either using the pushbuttons and an LCD screen
conveniently located behind the snap-off front sensor cover, or
with a wireless configuration tool.

Features

Plug n’ Go™ automatic configuration for quick installation and maximum energy savings
• Push n’ Learn™ functionality for customization without the need for tools or a PC
• Digital Lighting Management components plug together on a
free-topology Category 5e DLM local network
• Infrared (IR) transceiver for wireless configuration and control
• Ultrasonic diffusion technology spreads coverage to a wider area (patented); 40KHz signal
• 360 degree PIR coverage
• Detection Signature Processing eliminates false triggers and
provides immunity to RFI and EMI
• The product meets the materials restrictions of RoHS
• Sensor coverage tested to NEMA Guide Publication WD 7-2000
• BAA/TAA-compliant models available

Specifications

• Plug n’ Go™ automatic configuration for quick installation and maximum energy savings
• Push n’ Learn™ functionality for customization without the need for tools or a PC
• Digital Lighting Management components plug together on a
free-topology Category 5e DLM local network
• Infrared (IR) transceiver for wireless configuration and control
• Ultrasonic diffusion technology spreads coverage to a wider area (patented); 40KHz signal
• 360 degree PIR coverage
• Detection Signature Processing eliminates false triggers and provides immunity to RFI and EMI
• The product meets the materials restrictions of RoHS
• Sensor coverage tested to NEMA Guide Publication WD 7-2000
• BAA/TAA-compliant models available

For other items like the WattStopper LMDC-100 DUAL TECHNOLOGY CEILING MOUNT OCCUPANCY SENSOR click here.

For more information on WattStopper’s line of lighting control solutions click here.

WattStopper LMRC-100 SERIES DIGITAL SWITCHING ROOM CONTROLLER. LMRC-100 Series Digital Room Controllers include one or two relay(s) for on/off control of a total of 20 amps, and a high-efficiency switching power supply. They are the foundation of a WattStopper Digital Lighting Management (DLM) system, and allow integration of occupancy sensors, daylighting
sensors and switches for energy-efficient lighting control. LMRC-100 Series Room Controllers operate on one 120 or 277 volt, 20 amp, feed and provide Class 2 power to sensors and switches via the DLM local network. Once powered up, Plug n’ Go automatically configures system components for the most energy-efficient operation. The room controllers then switch lighting or motor loads on and off in response to input from the communicating devices. The DLM system may be reconfigured using Push n’ Learn without the need for tools or a PC.

Features

• Plug n’ Go™ automatic configuration for quick installation and maximum energy savings
• Push n’ Learn™ functionality for personalization without the need for tools or a PC
• Digital Lighting Management components plug together on a free-topology Cat 5e DLM local network
• On/Off button for each load

• 3 RJ45 ports with integral strain relief and hinged dust cover
• Zero-crossing circuitry for each relay for reliability and increased product life
• Attach to standard electrical box through ½” knockout; UL2043 plenum rated
• RoHS compliant

Specifications

• Input/ouput voltage: 120/277VAC, 50/60Hz
• Maximum 20A combined load per Room
Controller; each relay rated for:
– Ballast or incandescent: 20A
– Motor load: 1Hp
• Class 2 output to DLM local network: 24VDC, 150mA across 3 RJ45 ports
• DLM local network parameters with LMRC-100 Series and/or LMPL-101 Room Controllers only:
– Maximum current: 600mA
– Category 5e cable, up to 1,000’
– Maximum of 4 room controllers, controlling up to 8 loads
– Up to 24 communicating devices
• Operating conditions: for indoor use only; 32-104°F (0-40°C); 5-95% RH, non-condensing
• UL and cUL listed
• FCC part 15 compliant
• Five-year warranty

For other items like the WattStopper LMRC-100 SERIES DIGITAL SWITCHING ROOM CONTROLLER click here.

For more information on WattStopper’s line of lighting control solutions click here.

WattStopper LMSW-100 SERIES DIGITAL WALL SWITCH. LMSW-100 Series Wall Switches are low voltage devices for
energy-saving manual on/off control of one or more loads from one or more locations. They are part of a Digital Lighting Management (DLM) system and can control any load(s) connected to DLM room controllers. LMSW-100 Series Switches operate on Class 2 power supplied to a DLM local network by one or more room controllers. The switches send a digital signal for on or off whenever a pushbutton is pressed by a user. Plug n’ Go™ automatic configuration assigns each load to a switch button upon
system startup. If the number of buttons equals the number of loads, each button operates one load. If there are more loads than buttons, the last button controls multiple loads. Any extra buttons are unassigned. When multiple switches are installed, default operation is for multi-way control; each switch controls all of the loads on the system. Button assignments may be quickly reconfigured using Push n’ Learn™. Button configuration may be changed from load control to scene control using DLM configuration tools.

Features

• Hidden configuration button for easy access to Push n’ Learn
• Digital Lighting Managment components plug together on a free-topology Category 5e DLM local network
• Infrared (IR) transceiver for wireless configuration and control
• Sleek single gang devices fit decorator wall plates; 1-, 2-, 3-, 4-, and 8-button models
• Each button can control individual or multiple loads, or one scene; LED indicates status
• Each switch button can be used to dim the load
• Switches may be used for multi-way control
• Six color options and custom engraving options; standard buttons may be replaced in the field
• The product meets the materials restrictions of RoHS
• BAA/TAA-compliant models available

Specifications

• Input voltage: 24VDC from DLM local network
• Current consumption: 5mA
• DLM local network connection: 2 RJ45 ports
• 1, 2, 3, 4 or 8 control buttons, each with LED status indicator
• Hidden configuration button to access
• Push n’ Learn
• Infrared (IR) transceiver
• Operating conditions: for indoor use only; 32-131°F (0-55°C); 5-95% RH, non-condensing
• UL and cUL listed
• FCC part 15 compliant
• Five year warranty

For other items like the WattStopper LMSW-100 SERIES DIGITAL WALL SWITCH click here.

For more information on WattStopper’s line of lighting control solutions click here.