The CMR 9 Series Standard Range 360° occupancy sensor incorporates Passive Infrared (PIR) detection
technology into an attractive line powered occupancy sensor that provides amazing sensitivity to
small motions (e.g. hand movements) and excellent payback. The CMR 9 is an economical solution for
providing automatic lighting control where a wall switch replacement sensor is not applicable. With
an integrated line switching relay, the CMR 9 is perfect for applications where locating a power
pack is difficult, such as retrofitting rooms with concrete or inaccessible ceilings. For rooms
with obstructions, the CMR PDT 9 Series sensor is recommended.

FEATURES:

• Push-button programmable
• Adjustable time delays
• Multiple operating modes
• No field calibration or sensitivity adjustments required
• No minimum load requirements

This is the passive infrared dual relay wall switch occupancy sensor. The PW-302 passive infrared (PIR) wall switch sensor turns lights ON and OFF based on occupancy. It contains two relays for controlling two independent lighting loads or circuits, and a variety of features. The PW-302 replaces existing wall switches and installs in a single gang junction box with or without either neutral wiring. Each of the PW-302’s relays can control a separate lighting load. The device uses advanced PIR technology to detect occupancy and turn the first relay ON. The other relay must be manually engaged to turn remaining lights on. Once the space is vacated and the time delay elapses, all lights automatically turn OFF. Dual ON/OFF buttons allow the user to manually turn on and off each of the loads. DIP switch settings allow for a variety of control options such as Manual-ON or Auto-ON for each relay, walk-through and test modes. Multiple sensors may be used for control of one or more loads from up to four locations. The PW-302 sensor uses a patent pending Neutral Sense Technology. Any PW-302 sensor can be used for a two-wire or three wire application, either to work with existing wiring, or to meet local or national code requirements. An easy-to-break plastic tab covers neutral screw terminals. Once the sensor is connected to neutral it complies with all codes that restrict current leakage to ground. Check out Wattstopper DLM products here.

• Complies with 2011 NEC requirements
• Zero-crossing on both relays for long relay life
• Vandal resistant lens combines precise coverage with durability
• Selectable walk-through mode turns lights off three minutes after the room is initially occupied if no motion is detected after the first 30 seconds
• Test mode allows quick and easy adjustments
• LED indicates occupancy detection
• Selectable audible and/or visual alerts for impending shutoff
• In automatic mode, sensor returns automatically to Auto-ON after lights are turned off manually; ideal for presentations
• Optional light level sensor holds secondary lights off when ambient lighting is above the preset level
• Service mode allows sensor to operate as a service switch in the unlikely event of a failure
• Sensor coverage tested to NEMA Guide Publication WD 7-2000
• Compatible with decorator wall plates

This is the ultrasonic dual relay wall switch occupancy sensor. The UW-200 ultrasonic wall switch sensor turns lights ON and OFF based on occupancy. It contains two relays for controlling two independent lighting loads or circuits and a variety of features.

The UW-200 fits in a single gang junction box. Each of the UW-200’s relays can control a separate lighting load. It uses high frequency (40kHz) ultrasound to detect occupancy and turn the first relay ON. Once the space is vacated and the time delay elapses, lights automatically turn OFF. Dual ON/OFF buttons allow the user to manually turn on and off each of the loads. DIP switch settings allow for a variety of control options such as Manual-ON or Auto-ON for each relay, walk-through and test modes. Check out Wattstopper DLM products here.

• Auto- On Wall Occupancy Sensor PIR with Soft Push Button
• Small Motion Detection up to 20 Ft, Large Motion Detection up to 36 Ft
• Push-button programmable without removing cover plate – adjustable time delays & operating modes
• Dual Relay Push Button
• Pole 1 Auto-On / Pole 2 Vacancy
• Compatible w/LEDs, electronic & magnetic ballasts, CFLs, & incandescents
• Pre-configured for wiring without a neutral but is field configurable for code with neutral
• Integrated Photocell (disabled by default) prevents light from turning on if sufficient daylight is present – not available in Nightlight versions
• Applications: Small Offices, Small Rest Rooms, Closets, Small Enclosed Spaces

• Auto- On Wall Occupancy Sensor PIR with Soft Push Button
• Small Motion Detection up to 20 Ft, Large Motion Detection up to 36 Ft
• Push-button programmable without removing cover plate – adjustable time delays & operating modes
• Dual Relay Push Button
• Pole 1 + 2 Vacancy (Default) **Can be Changed
• Compatible w/LEDs, electronic & magnetic ballasts, CFLs, & incandescents
• Pre-configured for wiring without a neutral but is field configurable for code with neutral
• Integrated Photocell (disabled by default) prevents light from turning on if sufficient daylight is present – not available in Nightlight versions
• Applications: Small Offices, Small Rest Rooms, Closets, Small Enclosed Spaces

• Auto- On Wall Occupancy Sensor PIR with Soft Push Button
• Small Motion Detection up to 20 Ft, Large Motion Detection up to 36 Ft
• Push-button programmable without removing cover plate – adjustable time delays & operating modes
• Dual Relay Push Button
• Pole 1 + 2 Vacancy Only
• Compatible w/LEDs, electronic & magnetic ballasts, CFLs, & incandescents
• Pre-configured for wiring without a neutral but is field configurable for code with neutral
• Integrated Photocell (disabled by default) prevents light from turning on if sufficient daylight is present – not available in Nightlight versions
• Applications: Small Offices, Small Rest Rooms, Closets, Small Enclosed Spaces

• Wall Occupancy Sensor Dual Technology with Soft Push Button
• Passive Dual Technology (PDT) with Microphonics for Superior Detection
• Small Motion Detection up to 20 Ft, Large Motion Detection up to 36 Ft
• Push-button programmable without removing cover plate – adjustable time delays & operating modes
• Dual Relay Push Button
• Pole 1 +2 Vacancy Default (May be Changed)
• Operating Modes reprogrammable via push-button
• Compatible w/LEDs, electronic & magnetic ballasts, CFLs, & incandescents
• Pre-configured for wiring without a neutral but is field configurable for code with neutral
• Integrated Photocell (disabled by default) prevents light from turning on if sufficient daylight is present – not available in Nightlight versions
• Applications: Small Offices, Small Rest Rooms, Closets, Small Enclosed Spaces