This is the RadioRA 2 RF plugin appliance module. RadioRA 2 RF Plug-in Modules are simple to install and easy to use. RF Plug-in Modules allow floor and table lamps (RR-3PD-1) as well as general purpose switching loads (RR-15APS-1) to be added to a system quickly and easily using Clear Connect RF Technology. They can be hidden behind furniture or appliances. The RadioRA 2 Dimming Module (RR-3PD-1) functions much like standard lamp dimmers, but also incorporates advanced features such as fade on/fade off, delayed long fade off, and rapid full on. Check out the RadioRA 2 products page here.

• On a single-tap of the toggle button, load toggles ON or OFF.
• The appliance module may be used with, but is not limited to, the following: Task lighting or Humidifiers Note: Refer to the manufacturer’s guidelines for acceptable switching methods.
• The appliance module may NOT be suitable for use with devices that require any of the following: Shut-down process before power is interrupted, such as computers. Cool-down process before power is interrupted, such as projectors. Programming, such as clocks or DVRs. Long warm-up cycle.
• If an over-temperature condition is detected, the LED on the unit will flash a unique sequence (double-blink, then pause) and turn the load off. Proper installation and conformance to all specifications should be ensured before proceeding. To return the device to normal operation, cycle power to the device.

This is the RadioRA 2 visor control receiver. RadioRA® 2 Receiver provides two (2) Contact Closure Inputs (CCI) for integration with other systems and one (1) CCI for security systems. The CCIs can be configured to accept maintained or momentary contact closures. The security input is always a maintained CCI. The Receiver also has four (4) maintained or momentary Contact Closure Outputs (CCO) to control up to four (4) garage doors or motorized gates. Check out the RadioRA 2 products page here.

• Each output can be controlled locally at the Receiver or remotely by a Transmitter or keypad button.
• The Receiver ‘Keypad’ or ‘Inputs’ buttons can be programmed to light and shades /draperies. Design Features
• Full or Flash security options.
• The Transmitter can remotely control the ‘Keypad’, ‘Security Input’, and ‘Outputs’ buttons on the Receiver.
• LR-3B-H-SW:  Visor Control Transmitter (Sold Separately).