1

Acuity LC&D Blue Box 30A Relay Normally Closed LCDACC SL30NCL

LC&D ADDITIONAL RELAY BLUE BOX LT (NCL), LIGHTING CONTORLS

Acuity LC&D Blue Box 30A Relay Normally Closed LCDACC SL30NCL

This is the LC&D additional relay blue box LT (NCL). Check out our Acuity products here.

  • Single-pole latching relay
  • Can be defaulted to be normally closed(NC) or normally open(NO)
  • High-connectivity terminal blocks allows up to two #8 AWG wires per plug
  • Better efficiency since no energy is used to hold the contacts
  • Call or order double-pole option



ADDITIONAL RELAY – LTD FIELD CONFIGURABLE LC&D

LTD FIELD CONFIGURABLE LC&D, LIGHTING CONTROLS

This is the LTD field configurable LC&D. Check out our Acuity products here.

  • Single pole, single throw field configured relay
  • Can be configured to a double or triple pole using one-of-a-kind manual levers
  • Allows up to #6 AWG wires per plug
  • Manual override lever



BR – LC&D BRIGHTON DIGITAL SWITCH

LC&D BRIGHTON DIGITAL SWITCH, LIGHTING CONTROLS

This is the LC&D brighton digital switch. Check out our Acuity products here.

  • Connects to any Acuity LC&D Bluebook or GR2400 system and is connected via Cat. 5 cable
  • Mount on any standard 2.25” deep switch box
  • Order with 2, 4, 5, 6, 7, or 8 buttons per gang
  • Custom engraving available
  • Can be programmed using Digital Time Clock in panel on GR2400 Software
  • Pilot light illuminates all push buttons



CH – LC&D CHELSEA DIGITAL SWITCH

LC&D CHELSEA DIGITAL SWITCH, LIGHTING CONTROLS

This is the LC&D chelsea digital switch. Check out our Acuity products here.

  • Chelsea Switch connects to LC&D BlueBox And GR2400 via Cat5
  • Programmable via DTC (Digital Time Clock) for On/Off, Override and Dimming (LTD Only)
  • Custom button engraving
  • Pilot light to indicate relay status
  • Able to link to up to 127 digital addresses via Cat. 5 cable



KB – LC&D KNIGHTSBRIDGE DIGITAL SWITCH

LC&D KNIGHTSBRIDGE DIGITAL SWITCH, LIGHTING CONTROLS

This is the LC&D Knightsbridge digital switch. Check out our Acuity products here.

  • Knightrbridge Digital Switch
  • Compatible to any Acuity LC&D Blue Box or GR2400 system and is connected via Cat. 5 cable
  • Able to link up to 127 digital addresses via Cat. 5 cable
  • Mount on any standard 2.25” deep switch box
  • Program through the Lighting Control Panel Digital Time Clock
  • Order with one to six buttons
  • Custom engraving available
  • Pilot light illuminates all push buttons



LC&D DIGILINK CARD

LC&D DIGILINK CARD, LIGHTING CONTROLS

This is the LC&D digilink card. Check out our Acuity products here.

  • Gateway to contact closure devices for Acuity LC&D Blue Box and GR  2400 systems
  • Able to link 127 digital addresses via Cat. 5 cable
  • Up to 14 contact closure inputs
  • 6 input to allow digital enable/disable over the bus
  • Able to connect to occupancy sensors
  • Able to connect to low voltage switches
  • Install directly into most panels, option to add separate housing



LC&D GR1400 MODEM

LC&D GR1400 MODEM, LIGHTING CONTROLS

This is the LC&D GR1400 modem. Check out our Acuity products here.

  • Blue Box Modem for connecting to Analog Phone Line
  • Attaches into the interior of the Blue Box
  • Connect to Phone Line for Dial-in Factory Programming Assistance



LC&D VOLTAGE BARRIER

LC&D VOLTAGE BARRIER, LIGHTING CONTROLS

This is the LC&D voltage barrier. LC&D voltage barrier separates normal power relays from emergency power relays or different voltages. Check out our Acuity products here.

  • For use on BlueBox LT GR1400 Series Panels

 

 




PCELL 2WO BB

PCELL 2WO BB
  • Two-wire photo sensor designed for single-zone outdoor lighting control applications
  • Monitored using Digital Time Clock(DTC)
  • Sealed housing for operation in wet conditions



PCELL 3WI TZ – LC&D 3 WIRE INTERIOR PHOTOCELL

LC&D 3 WIRE INTERIOR PHOTOCELL, LIGHTING CONTROLS

This is the LC&D 3 wire interior photocell. Check out our Acuity products here.

  • LC&D – 3 Wire Interior Photocell for Daylighting
  • Can be used in almost any location without the need to adjust to the reflectivity of the environment
  • Standard Ceiling Mount Configuration
  • Extended sensitivity range; no adjustment needed
  • Ability to be used in both open loop and closed loop applications
  • Low Voltage
  • Wire into LC&D Blue Box LTD Panel on board Input
  • “-TZ” is for the LC&D LTD Panel



Silverbullet – LC&D CURRENT LIMITING PANEL – T24 and T24M

LC&D CURRENT LIMITING PANEL, LIGHTING CONTROLS

This the LC&D current limiting panel. The SilverBullet is a “sub-branch circuit current limiter” for track lighting that enforces a definite current limit to lower the VA rating of each track lighting circuit and meet code requirements. Check out our Acuity products here.

  • Current limiting for up to 21 circuits
  • Current limiting breakers available from 1A-15A
  • AIC rating of 10,000A @ 120V – 277V
  • Factory pre-assembled with each load factory labeled on the door sheet
  • Each Panel is Manufactured per your specifications
  • Allow 10 – 15 business days for your order to be built.