• On / off toggle switch with a captive linear-slide dimmer for a traditional wallplate opening
• HED Technology: Advanced Lutron dimming circuitry designed for compatibility with most high efficacy light bulbs
• UL Listed to control:
  •  Dimmable compact fluorescent load (CFL) with
    integrated ballast
  • Dimmable LED with integrated driver
  • Halogen
  • Incandescent

• On / off toggle switch with a captive linear-slide dimmer for a traditional wallplate opening
• HED Technology: Advanced Lutron dimming circuitry designed for compatibility with most high efficacy light bulbs
• UL Listed to control:
  •  Dimmable compact fluorescent load (CFL) with
    integrated ballast
  • Dimmable LED with integrated driver
  • Halogen
  • Incandescent

• Large paddle switch with a captive linear-slide dimmer for a standard designer wallplate opening
•  HED Technology: Advanced Lutron dimming circuitry designed for compatibility with most high efficacy light bulbs
• ULR Listed to control:
  • Dimmable compact fluorescent (CFL) with integrated ballast
  • Dimmable LED with integrated driver
  • Lutron Hi-lumeR A-Series LTE LED Driver
  • Halogen
  • Incandescent

This is the Local Relay Module w/ optional, 2-channel, 0-10V Dimming.

• Provide a distributed control solution which allows the installer to place the module in close proximity to the controlled load.
• Can be connected directly to a master interface or through multi-function interfaces.
• Local Relay Modules each encompass (2) latching (mechanically held) single pole relays and each module incorporates the latest in “zero-cross” switching technology for improved equipment life.
• Include (3) “smart ports.” Each smart port provides a daisy-chained connection for up to (8) smart devices and are connected to the Local Relay Modules via standard Cat5 patch cables.

• Large tapswitch with a rocker-style dimmer for a standard designer wallplate opening
• Advanced dimming technology designed for compatibility with a broader range of high efficacy bulbs
• UL Listed to control:
  • Dimmable Compact Fluorescent Lamps (CFL) with integrated ballast
  • Dimmable LED with integrated driver
  • Halogen
  • Incandescent

WattStopper LMRC-110 SERIES 0-10V DIMMING ROOM CONTROLLERS (LMRC-111, LMRC-112). LMRC-110 series room controllers include one or two relay(s) to switch a total of 10 amps, a high-efficiency switching power supply and dual 0-10 volt outputs per relay for control of dimmable loads including compatible LED drivers or electronic ballasts. They are the foundation of a Digital Lighting Management (DLM) system, and allow integration of occupancy sensors, daylighting controls and switches for energy-efficient control.

LMRC-110 series room controllers operate on one 120 or 277
volt, 10 amp feed and provide Class 2 power to sensors and
switches via the DLM local network. Once powered up, Plug n’
Go automatically configures system components for the most
energy-efficient operation. The room controllers then dim or
switch lighting or motor loads in response to input from the
communicating devices. When a dimming input is received, the
relay switches on when the dimmed level rises above zero, and
off when it reaches zero, to coordinate control of power and the
0-10 volt signal to the load. They also monitor the current draw
of the total connected load. Each room controller stores up to
16 scene preset levels for each dimmed output.

Features

• Push n’ Learn™ functionality for personalization without the need for tools or a PC
• Digital Lighting Management components plug together on a free-topology Cat 5e DLM local network eliminatingwiring errors
• On/Off/Dim local override button for each load
• LED indicates status of each load
• Optional lamp burn in; 12 or 100 hours
• Optional instantaneous current and voltage measurement of total connected load
• 2 RJ45 ports; molded cable tie ring for strain relief
• Zero-crossing circuitry for each relay for reliability and increased product life
• UL 2043 plenum rated
• This product meets the materials restrictions of RoHS
• U.S.-made models available for public works projects

Specifications

• Voltage: 120/277VAC; 50/60Hz
• Maximum 10A combined load per Room Controller; each relay rated for 10A ballast, E-ballast or incandescent
• Galvanically isolated Class 1 pigtails and Class 2 terminals for 0-10VDC signal; sinks up to 50mA per output (Class 1/
Class 2) per channel for control of compatible ballasts (25 if each sources 2mA)
• Intelligently controlled Class 2 output to DLM local network: 24VDC, up to 150mA across 2 RJ45 ports
• DLM local network parameters:
– Maximum current: 800mA
– Category 5e cable: 150’ per device to 1,000’ max.
– Up to 64 loads
– Up to 48 communicating devices
– Maximum 4 LMPB-100, LMPL-101 or LMRC-100 Series Room Controllers
• Requires LMCS 4.5.1, Segment Manager 2.1.23, or LMCT 5.24
(or later)
• Operating conditions: for indoor use only; @120/277V:
32-131°F (0-55°C); 5-95% RH, non-condensing
• UL and cUL listed (E101196)
• FCC part 15 compliant
• Five year warranty

For other items like the WattStopper LMRC-110 SERIES 0-10V DIMMING ROOM CONTROLLERS click here.

For more information on WattStopper’s line of lighting control solutions click here.