1

HJS-1/2-FM/SM – VIVE WIRELESS HUB

VIVE WIRELESS HUB, LIGHTING CONTROLS

This is the Vive Wireless Hub. The Vive hub provides a connection point for Lutron Vive devices such as PowPak wireless dimming and switching modules, PowPak Wireless Fixture Controllers, PowPak 20 A Relay Modules, Maestro Wireless dimmers and switches, Pico remote controls, Radio Powr Savr occupancy sensors, and daylight sensors. For a complete list of compatible devices, see spec sheet (downloadable PDF). Click here to see the Lutron Vive story.

Features:

  • Communicates with controls on a floor using Lutron wireless Clear Connect technology (range radius of 71 ft [22 m]).
  • Distributed system architecture. Wireless sensors and controls must be located within 60 ft. (18 m) line of sight, or 30 ft. (9 m), through walls, of the associated device.
  • Supports timeclock events based on both sunrise and sunset or fixed time-of-day.
  • Integrated multi-color LED provides feedback on what mode the hub is in.
  • Contact Closure Inputs for integration with devices by others including devices for Title 24 Automatic Demand Response



LUTRON RRD-6CL-XX – RadioRA 2 MAESTRO LOCAL CONTROL DIMMER (DISCONTINUED)

RadioRA 2 MAESTRO LOCAL CONTROL DIMMER, LIGHTING CONTROLS

This is the RadioRA 2 maestro local control dimmer. RadioRA 2 Maestro local controls function much like standard dimmers and switches, but can be controlled as part of a lighting control system. Local lighting controls are useful in locations where single circuits of lighting need to be dimmed or switched. RadioRA 2 Maestro dimmers incorporate advanced features such as fade on/fade off, delayed long fade to off, and rapid full on. RadioRA 2 Maestro local controls include a Front Accessible Service Switch (FASSTM) for safe lamp replacement. RadioRA 2 Maestro local controls install in single-pole or multi-location applications. Remote dimmers / switches are available for multi-location control. Use Lutron® Designer (Claro® or Satin Colors®) wallplates or designer-style wallplates from other manufacturers. Wallplates are sold separately. Lutron Claro and Satin Colors wallplates snap on with no visible means of attachment. RadioRA 2 Maestro local controls support color change kits. Check out the RadioRA 2 products page here.

  • On a single-tap, lights fade ON or OFF.
  • On a double-tap, lights go to full ON.
  • When ON, press and hold the tapswitch to engage the delayed long fade to OFF.
  • Light levels can be fine-tuned by pressing and holding the dimming rocker until the desired light level is reached.



MA-600-XX – Maestro Multi-location/single-pole Digital fade dimmer

Maestro Multi-location/single-pole Digital fade dimmer



MA-T530G-XX – Maestro Single-Pole Countdown eco-timer control switch

LUTRON, DIMMER, SWITCH, HOME AUTOMATION



MAELV-600-XX – Maestro Multi-location/single-pole Digital fade dimmer

Maestro Multi-location/single-pole Digital fade dimmer



MRF2S-1S8A-1OC – VIVE BASIC PACKAGE 8 AMP RADIO POWR SAVR SWITCH & CEILING SENSOR

VIVE BASIC PACKAGE 8 AMP RADIO POWR SAVR SWITCH & CEILING SENSOR, LIGHT CONTROLS

This is a Vive Basic Package 8 Amp Radio Powr Savr Switch & Ceiling Sensor. The Maestro Wireless solution incorporates Maestro Wireless load controls, wireless sensors, and wireless remote controls, which provide a system that delivers energy savings, convenience, and ease of installation. Maestro Wireless dimmers and switches use Lutron patented Clear Connect RF Technology, which enables wireless communication with Radio Powr Savr sensors and Pico remote controls for light control and general switched loads. These products are also compatible with the Vive hub which enables a simple setup process using a standard web browser on any Wi-Fi enabled phone, tablet or computer. It also enables control and monitoring of all Vive devices. The Vive hub can be added at any time and preserves existing system setup by extracting local programming from each device. For a complete list of features supported with the Vive hub, call Lite Rite Controls. Note for Replacement: MRF2S – the “S” model can replace the non-”S” model. Click here to see the Lutron Vive story.

Features:

  • The Vive Basic Package 8 Amp Radio Powr Savr Switch & Ceiling Sensor.
  • Lutron® patented Clear Connect® RF Technology works through walls and floors.
  • Controls include Front Accessible Service Switch (FASS™) for safe lamp replacement.
  • Two-wire installation for any retrofit application.
  • Power failure memory: If power is interrupted, the control will return to its previously set level prior to interruption.



MRF2S-1S8A-1OH – VIVE BASIC PACKAGE 8 AMP SWITCH & HALLWAY SENSOR

VIVE BASIC PACKAGE 8 AMP SWITCH & HALLWAY SENSOR, COMMERCIAL LIGHTING CONTROL, LIGHTING CONTROLS

This is a Vive basic package 8 Amp switch & hallway sensor. The Maestro Wireless solution incorporates Maestro Wireless load controls, wireless sensors, and wireless remote controls, which provide a system that delivers energy savings, convenience, and ease of installation. Maestro Wireless dimmers and switches use Lutron patented Clear Connect RF Technology, which enables wireless communication with Radio Powr Savr sensors and Pico remote controls for light control and general switched loads. These products are also compatible with the Vive hub which enables a simple setup process using a standard web browser on any Wi-Fi enabled phone, tablet or computer. It also enables control and monitoring of all Vive devices. The Vive hub can be added at any time and preserves existing system setup by extracting local programming from each device. For a complete list of features supported with the Vive hub, call Lite Rite Controls. Note for Replacement: MRF2S – the “S” model can replace the non-”S” model. Click here to see the Lutron Vive story.

HIGHLIGHTS:

  • The Vive basic package 8 Amp switch & hallway sensor provides switching and occupancy / vacancy sensing.
  • Lutron patented Clear Connect RF Technology works through walls and floors.
  • Controls include Front Accessible Service Switch (FASSTM) for safe lamp replacement.
  • Two-wire installation for any retrofit application.
  • Power failure memory: If power is interrupted, the control will return to its previously set level prior to interruption.

System Communications and Capacity

  • Maestro Wireless controls communicate with the Pico remote controls and Radio Power Savr
  • sensors through radio frequency (RF).
  • Receives wireless inputs from up to 10 Pico remote controls, 10 Radio Powr Savr occupancy / vacancy sensors, and 1 Radio Powr Savr daylight sensor
  • Maestro Wireless local controls must be located within 60 ft. (18 m) line of sight or 30 ft. (9 m) through walls, of Radio Power Savr sensors.
  • Maestro Wireless local controls must be located within 60 ft. (18 m) line of sight or 30 ft. (9 m)
  • through walls, of a Pico remote control.
  • Up to 10 Maestro Wireless controls can be configured to work together.
  • Sensors can be assigned to multiple switches.



MRF2S-1S8A-1OK – VIVE BASIC PACKAGE 8A SWITCH AND CORNER SENSOR

VIVE BASIC PACKAGE 8A SWITCH AND CORNER SENSOR, COMMERCIAL LIGHTING CONTROL FOR OFFICE, LIGHTING CONTROL STARTER KIT

This is a Vive basic package 8A switch and corner sensor. The Maestro Wireless solution incorporates Maestro Wireless load controls, wireless sensors, and wireless remote controls, which provide a system that delivers energy savings, convenience, and ease of installation. Maestro Wireless dimmers and switches use Lutron patented Clear Connect RF Technology, which enables wireless communication with Radio Powr Savr sensors and Pico remote controls for light control and general switched loads. These products are also compatible with the Vive hub which enables a simple setup process using a standard web browser on any Wi-Fi enabled phone, tablet or computer. It also enables control and monitoring of all Vive devices. The Vive hub can be added at any time and preserves existing system setup by extracting local programming from each device. For a complete list of features supported with the Vive hub, call Lite Rite Controls. Note for Replacement: MRF2S – the “S” model can replace the non-”S” model. Click here to see the Lutron Vive story.

HIGHLIGHTS:

  • The Vive Basic package 8A switch and corner sensor provides switching and occupancy / vacancy sensing.
  • Lutron patented Clear Connect RF Technology works through walls and floors.
  • Controls include Front Accessible Service Switch (FASSTM) for safe lamp replacement.
  • Two-wire installation for any retrofit application.
  • Power failure memory: If power is interrupted, the control will return to its previously set level prior to interruption.

System Communications and Capacity

  • Maestro Wireless controls communicate with the Pico remote controls and Radio Power Savr
  • sensors through radio frequency (RF).
  • Receives wireless inputs from up to 10 Pico remote controls, 10 Radio Powr Savr occupancy / vacancy sensors, and 1 Radio Powr Savr daylight sensor
  • Maestro Wireless local controls must be located within 60 ft. (18 m) line of sight or 30 ft. (9 m) through walls, of Radio Power Savr sensors.
  • Maestro Wireless local controls must be located within 60 ft. (18 m) line of sight or 30 ft. (9 m)
  • through walls, of a Pico remote control.
  • Up to 10 Maestro Wireless controls can be configured to work together.

Sensors can be assigned to multiple switches.




MRF2S-1S8A-1OW – VIVE BASIC PACKAGE 8A SWITCH AND WALL SENSOR

VIVE BASIC PACKAGE 8A SWITCH AND WALL SENSOR, SWITCH AND WALL SENSOR, LIGHTING CONTROLS, COMMERCIAL LIGHTING CONTROL STARTER KIT FOR OFFICE

This is a Vive basic package 8A switch and wall sensor. The Maestro Wireless solution incorporates Maestro Wireless load controls, wireless sensors, and wireless remote controls, which provide a system that delivers energy savings, convenience, and ease of installation. Maestro Wireless dimmers and switches use Lutron patented Clear Connect RF Technology, which enables wireless communication with Radio Powr Savr sensors and Pico remote controls for light control and general switched loads. These products are also compatible with the Vive hub which enables a simple setup process using a standard web browser on any Wi-Fi enabled phone, tablet or computer. It also enables control and monitoring of all Vive devices. The Vive hub can be added at any time and preserves existing system setup by extracting local programming from each device. For a complete list of features supported with the Vive hub, call Lite Rite Controls. Note for Replacement: MRF2S – the “S” model can replace the non-”S” model. Click here to see the Lutron Vive story.

HIGHLIGHTS:

  • The Vive basic package 8A switch and wall sensor provides switching and occupancy / vacancy sensing.
  • Lutron patented Clear Connect RF Technology works through walls and floors.
  • Controls include Front Accessible Service Switch (FASSTM) for safe lamp replacement.
  • Two-wire installation for any retrofit application.
  • Power failure memory: If power is interrupted, the control will return to its previously set level prior to interruption.

System Communications and Capacity

  • Maestro Wireless controls communicate with the Pico remote controls and Radio Power Savr
  • sensors through radio frequency (RF).
  • Receives wireless inputs from up to 10 Pico remote controls, 10 Radio Powr Savr occupancy / vacancy sensors, and 1 Radio Powr Savr daylight sensor
  • Maestro Wireless local controls must be located within 60 ft. (18 m) line of sight or 30 ft. (9 m) through walls, of Radio Power Savr sensors.
  • Maestro Wireless local controls must be located within 60 ft. (18 m) line of sight or 30 ft. (9 m)
  • through walls, of a Pico remote control.
  • Up to 10 Maestro Wireless controls can be configured to work together.
  • Sensors can be assigned to multiple switches.

 




MRF2S-1S8A-1VC – VIVE BASIC PACKAGE: SWITCH & CEILING VACANCY SENSOR

VIVE BASIC PACKAGE: SWITCH & CEILING VACANCY SENSOR, LIGHTING CONTROLS

This is a Vive basic Package: Switch & Ceiling Vacancy Sensor. The Maestro Wireless solution incorporates Maestro Wireless load controls, wireless sensors, and wireless remote controls, which provide a system that delivers energy savings, convenience, and ease of installation. Maestro Wireless dimmers and switches use Lutron patented Clear Connect RF Technology, which enables wireless communication with Radio Powr Savr sensors and Pico remote controls for light control and general switched loads. These products are also compatible with the Vive hub which enables a simple setup process using a standard web browser on any Wi-Fi enabled phone, tablet or computer. It also enables control and monitoring of all Vive devices. The Vive hub can be added at any time and preserves existing system setup by extracting local programming from each device. For a complete list of features supported with the Vive hub, call Lite Rite Controls

The Vive™ Basic Package incorporates Maestro® load controls and wireless sensors which provides a system that delivers energy savings, convenience and ease of installation. These products are also compatible with the Vive™ hub which enables a simple setup process using a standard web browser on any Wi-Fi enabled phone, tablet or computer. It also enables control and monitoring of all Vive™ devices. The Vive™ hub can be added at any time and preserves existing system setup by extracting local programming from each device. Click here to see the Lutron Vive story.

Features:

  • The Vive™ Basic package provides switching and occupancy / vacancy sensing of multiple load types.
  • Lutron® patented Clear Connect® RF Technology works through walls and floors.
  • Controls include Front Accessible Service Switch (FASS™) for safe lamp replacement.
  • Two-wire installation for any retrofit application.
  • Power failure memory: If power is interrupted, the control will return to its previously set level prior to interruption.



MRF2S-2S8A-1OW – (2) 8A SWITCHES & (1) RADIO POWR SAVR WALL SENSOR

(2) 8A SWITCHES & (1) RADIO POWR SAVR WALL SENSOR
  • RF Technology works through walls and floors.
  • Controls include Front Accessible Service Switch for safe lamp replacement.
  • Two-wire installation for any retrofit application.
  • Power failure memory: If power is interrupted, the control will return to its previously set level prior to interruption.



MRF2S-2S8A-1OW – VIVE BASIC KIT 2S10W

VIVE BASIC KIT: VIVE BASIC KIT 2S10W, TWO SWITCHES AND A WALL SENSOR, LIGHTING CONTROLS, COMMERCIAL LIGHTING CONTROL

This is a Vive basic kit 2S10W which includes 2-8a switches and a wall sensor. The Maestro Wireless solution incorporates Maestro Wireless load controls, wireless sensors, and wireless remote controls, which provide a system that delivers energy savings, convenience, and ease of installation. Maestro Wireless dimmers and switches use Lutron patented Clear Connect RF Technology, which enables wireless communication with Radio Powr Savr sensors and Pico remote controls for light control and general switched loads. These products are also compatible with the Vive hub which enables a simple setup process using a standard web browser on any Wi-Fi enabled phone, tablet or computer. It also enables control and monitoring of all Vive devices. The Vive hub can be added at any time and preserves existing system setup by extracting local programming from each device. For a complete list of features supported with the Vive hub, call Lite Rite Controls. Note for Replacement: MRF2S – the “S” model can replace the non-”S” model. Click here to see the Lutron Vive story.

HIGHLIGHTS:

  • The Vive Basic Kit 2S10W provides switching and occupancy / vacancy sensing of multiple load types.
  • Lutron patented Clear Connect RF Technology works through walls and floors.
  • Controls include Front Accessible Service Switch (FASSTM) for safe lamp replacement.
  • Two-wire installation for any retrofit application.
  • Power failure memory: If power is interrupted, the control will return to its previously set level prior to interruption.

System Communications and Capacity

  • Maestro Wireless controls communicate with the Pico remote controls and Radio Power Savr sensors through radio frequency (RF).
  • Receives wireless inputs from up to 10 Pico remote controls, 10 Radio Powr Savr occupancy / vacancy sensors, and 1 Radio Powr Savr daylight sensor.
  • Maestro Wireless local controls must be located within 60 ft. (18 m) line of sight or 30 ft. (9 m) through walls, of Radio Power Savr sensors.
  • Maestro Wireless local controls must be located within 60 ft. (18 m) line of sight or 30 ft. (9 m) through walls, of a Pico remote control.
  • Up to 10 Maestro Wireless controls can be configured to work together.
  • Sensors can be assigned to multiple switches.