SCREW-MOUNT KIT FOR PICO® WIRELESS CONTROL

PICO-SM-KIT – SCREW-MOUNT KIT FOR PICO® WIRELESS CONTROL

Mounting Considerations:

  • Mounting of any RF devices on or in close proximity to a metal surface will drastically reduce the effective range of radio signal transmission or reception.
  • All RF devices must be mounted on non-conductive materials to ensure proper performance.
  • If you wish to mount your PicoR wireless control to a metal surface, the PICO-MOUNT-1-XX-CPN5733 will be required in order to maintain proper RF performance.



PICO WIRELESS CONTROL 2 BUTTON, LIGHTING CONTROLS

PJ2-2B-GXX-XXX – PICO WIRELESS CONTROL 2 BUTTON

This is a Pico Wireless Control 2 button. Click here to see the Lutron Vive story.

  • Provides control for the following:
    • Caséta Wireless controls
    • Energi Savr NodeT, Quantum , and myRoomT systems, through the use of a QS sensor module (QSM)
    • Vive TM systems, including:
    • Maestro Wireless controls
    • PowPak ® modules
    • GRAFIK Eye QS wireless systems
    • HomeWorks QS wireless systems
    • Maestro Wireless controls
    • PowPak modules
    • RadioRA 2 systems
    • Serena RF remote control shades
    • Sivoia QS wireless systems
  • Control available in a variety of button marking options.
  • Easy reconfiguration for use as:
    • Handheld remote
    • Wall-mount control (with or without faceplate; faceplate adapter kit sold separately)
    • Car visor control (car visor clip sold separately)
    • A table top control (table top pedestal sold separately).

HIGHLIGHTS:

  • The Vive Basic package provides switching and occupancy / vacancy sensing of multiple load types.
  • Lutron patented Clear Connect RF Technology works through walls and floors.
  • Controls include Front Accessible Service Switch (FASSTM) for safe lamp replacement.
  • Two-wire installation for any retrofit application.
  • Power failure memory: If power is interrupted, the control will return to its previously set level prior to interruption.

System Communications and Capacity

  • Maestro Wireless controls communicate with the Pico remote controls and Radio Power Savr
  • sensors through radio frequency (RF).
  • Receives wireless inputs from up to 10 Pico remote controls, 10 Radio Powr Savr occupancy / vacancy sensors, and 1 Radio Powr Savr daylight sensor
  • Maestro Wireless local controls must be located within 60 ft. (18 m) line of sight or 30 ft. (9 m) through walls, of Radio Power Savr sensors.
  • Maestro Wireless local controls must be located within 60 ft. (18 m) line of sight or 30 ft. (9 m)
  • through walls, of a Pico remote control.
  • Up to 10 Maestro Wireless controls can be configured to work together.
  • Sensors can be assigned to multiple switches.



PICO WIRELESS CONTROL 2 BUTTON w/ RAISE/LOWER, LIGHTING CONTROLS

PJ2-2BRL-GXX-XXX – PICO WIRELESS CONTROL 2 BUTTON w/ RAISE/LOWER

This is a Pico Wireless Control 2 button w/ raise/lower. Click here to see the Lutron Vive story.

  • Provides control for the following:
    • Caséta Wireless controls
    • Energi Savr NodeT, Quantum , and myRoomT systems, through the use of a QS sensor module (QSM)
    • Vive TM systems, including:
    • Maestro Wireless controls
    • PowPak ® modules
    • GRAFIK Eye QS wireless systems
    • HomeWorks QS wireless systems
    • Maestro Wireless controls
    • PowPak modules
    • RadioRA 2 systems
    • Serena RF remote control shades
    • Sivoia QS wireless systems
  • Control available in a variety of button marking options.
  • Easy reconfiguration for use as:
    • Handheld remote
    • Wall-mount control (with or without faceplate; faceplate adapter kit sold separately)
    • Car visor control (car visor clip sold separately)
    • A table top control (table top pedestal sold separately).

HIGHLIGHTS:

  • The Vive Basic package provides switching and occupancy / vacancy sensing of multiple load types.
  • Lutron patented Clear Connect RF Technology works through walls and floors.
  • Controls include Front Accessible Service Switch (FASSTM) for safe lamp replacement.
  • Two-wire installation for any retrofit application.
  • Power failure memory: If power is interrupted, the control will return to its previously set level prior to interruption.

System Communications and Capacity

  • Maestro Wireless controls communicate with the Pico remote controls and Radio Power Savr
  • sensors through radio frequency (RF).
  • Receives wireless inputs from up to 10 Pico remote controls, 10 Radio Powr Savr occupancy / vacancy sensors, and 1 Radio Powr Savr daylight sensor
  • Maestro Wireless local controls must be located within 60 ft. (18 m) line of sight or 30 ft. (9 m) through walls, of Radio Power Savr sensors.
  • Maestro Wireless local controls must be located within 60 ft. (18 m) line of sight or 30 ft. (9 m)
  • through walls, of a Pico remote control.
  • Up to 10 Maestro Wireless controls can be configured to work together.
  • Sensors can be assigned to multiple switches.



PICO WIRELESS CONTROL 3 BUTTON, LIGHTING CONTROLS

PJ2-3B-GXX-L01 – PICO WIRELESS CONTROL 3 BUTTON

This is a Pico Wireless Control 3 button. Click here to see the Lutron Vive story.

  • Provides control for the following:
    • Caséta Wireless controls
    • Energi Savr NodeT, Quantum , and myRoomT systems, through the use of a QS sensor module (QSM)
    • Vive TM systems, including:
    • Maestro Wireless controls
    • PowPak ® modules
    • GRAFIK Eye QS wireless systems
    • HomeWorks QS wireless systems
    • Maestro Wireless controls
    • PowPak modules
    • RadioRA 2 systems
    • Serena RF remote control shades
    • Sivoia QS wireless systems
  • Control available in a variety of button marking options.
  • Easy reconfiguration for use as:
    • Handheld remote
    • Wall-mount control (with or without faceplate; faceplate adapter kit sold separately)
    • Car visor control (car visor clip sold separately)
    • A table top control (table top pedestal sold separately).

HIGHLIGHTS:

  • The Vive Basic package provides switching and occupancy / vacancy sensing of multiple load types.
  • Lutron patented Clear Connect RF Technology works through walls and floors.
  • Controls include Front Accessible Service Switch (FASSTM) for safe lamp replacement.
  • Two-wire installation for any retrofit application.
  • Power failure memory: If power is interrupted, the control will return to its previously set level prior to interruption.

System Communications and Capacity

  • Maestro Wireless controls communicate with the Pico remote controls and Radio Power Savr
  • sensors through radio frequency (RF).
  • Receives wireless inputs from up to 10 Pico remote controls, 10 Radio Powr Savr occupancy / vacancy sensors, and 1 Radio Powr Savr daylight sensor
  • Maestro Wireless local controls must be located within 60 ft. (18 m) line of sight or 30 ft. (9 m) through walls, of Radio Power Savr sensors.
  • Maestro Wireless local controls must be located within 60 ft. (18 m) line of sight or 30 ft. (9 m)
  • through walls, of a Pico remote control.
  • Up to 10 Maestro Wireless controls can be configured to work together.
  • Sensors can be assigned to multiple switches.



PICO WIRELESS CONTROL 3 BUTTON W/ RAISE/LOWER, LIGHTING CONTROLS

PJ2-3BRL-GXX-XXX – PICO WIRELESS CONTROL 3 BUTTON W/ RAISE/LOWER

This is a Pico Wireless Control 3 button w/ raise/lower. Click here to see the Lutron Vive story.

  • Provides control for the following:
    • Caséta Wireless controls
    • Energi Savr NodeT, Quantum , and myRoomT systems, through the use of a QS sensor module (QSM)
    • Vive TM systems, including:
    • Maestro Wireless controls
    • PowPak ® modules
    • GRAFIK Eye QS wireless systems
    • HomeWorks QS wireless systems
    • Maestro Wireless controls
    • PowPak modules
    • RadioRA 2 systems
    • Serena RF remote control shades
    • Sivoia QS wireless systems
  • Control available in a variety of button marking options.
  • Easy reconfiguration for use as:
    • Handheld remote
    • Wall-mount control (with or without faceplate; faceplate adapter kit sold separately)
    • Car visor control (car visor clip sold separately)
    • A table top control (table top pedestal sold separately).

HIGHLIGHTS:

  • The Vive Basic package provides switching and occupancy / vacancy sensing of multiple load types.
  • Lutron patented Clear Connect RF Technology works through walls and floors.
  • Controls include Front Accessible Service Switch (FASSTM) for safe lamp replacement.
  • Two-wire installation for any retrofit application.
  • Power failure memory: If power is interrupted, the control will return to its previously set level prior to interruption.

System Communications and Capacity

  • Maestro Wireless controls communicate with the Pico remote controls and Radio Power Savr
  • sensors through radio frequency (RF).
  • Receives wireless inputs from up to 10 Pico remote controls, 10 Radio Powr Savr occupancy / vacancy sensors, and 1 Radio Powr Savr daylight sensor
  • Maestro Wireless local controls must be located within 60 ft. (18 m) line of sight or 30 ft. (9 m) through walls, of Radio Power Savr sensors.
  • Maestro Wireless local controls must be located within 60 ft. (18 m) line of sight or 30 ft. (9 m)
  • through walls, of a Pico remote control.
  • Up to 10 Maestro Wireless controls can be configured to work together.
  • Sensors can be assigned to multiple switches.



2 BUTTON PICO WIRELESS CONTROL W/ NIGHTLIGHT, LIGHTING CONTROLS

PJN-2B-GXX-L01 – 2 BUTTON PICO WIRELESS CONTROL W/ NIGHTLIGHT

This the 2 button Pico wireless control w/ nightlight. Check out the RadioRA 2 products page here.

  • Provides control for the following:
    • Maestro WirelessR controls
    • PowPakR Modules
    • Energi Savr NodeT and QuantumR systems, through the use of a QS sensor module (QSM)
    • GRAFIK EyeR QS wireless systems
    • RadioRAR 2 systems
    • HomeWorksR QS wireless systems
    • CasetaT Wireless dimmers
  • Battery-powered. Requires no wiring.



PICO WIRELESS CONTROL W/ NIGHTLIGHT - 3 BUTTON W/ RAISE/LOWER, LIGHTING CONTROLS

PJN-3BRL-GXX-L01 – PICO WIRELESS CONTROL W/ NIGHTLIGHT – 3 BUTTON W/ RAISE/LOWER

This is the Pico wireless control w/ nightlight – 3 button w/ raise/lower. Check out the RadioRA 2 products page here.

  • Provides control for the following:
    • Maestro WirelessR controls
    • PowPakR Modules
    • Energi Savr NodeT and QuantumR systems, through the use of a QS sensor module (QSM)
    • GRAFIK EyeR QS wireless systems
    • RadioRAR 2 systems
    • HomeWorksR QS wireless systems
    • CasetaT Wireless dimmers
  • Battery-powered. Requires no wiring.



PICO WIRED CONTROL 2 BUTTON

PX-2B-GXX-I01 – PICO WIRED CONTROL 2 BUTTON

  • Provides control for the following Lutron products that incorporate a wired IR input:
    • Energi Savr Node units
    • QS Sensor Modules
    • EcoSystem ballasts or ballast modules
  • Mounts easily in any single-gang wallbox
  • Fits designer style Claro wallplates



PICO WIRED CONTROL 2 BUTTON W/ RAISE/LOWER

PX-2BRL-GXX-I01 – PICO WIRED CONTROL 2 BUTTON W/ RAISE/LOWER

  • Provides control for the following Lutron products that incorporate a wired IR input:
    • Energi Savr Node units
    • QS Sensor Modules
    • EcoSystem ballasts or ballast modules
  • Mounts easily in any single-gang wallbox
  • Fits designer style Claro wallplates



PICO WIRED CONTROL 3 BUTTONS

PX-3B-GXX-I01 – PICO WIRED CONTROL 3 BUTTONS

  • Provides control for the following Lutron products that incorporate a wired IR input:
    • Energi Savr Node units
    • QS Sensor Modules
    • EcoSystem ballasts or ballast modules
  • Mounts easily in any single-gang wallbox
  • Fits designer style Claro wallplates



PICO WIRED CONTROL 3 BUTTONS W/ RAISE/LOWER

PX-3BRL-GXX-I01 – PICO WIRED CONTROL 3 BUTTONS W/ RAISE/LOWER

  • Provides control for the following Lutron products that incorporate a wired IR input:
    • Energi Savr Node units
    • QS Sensor Modules
    • EcoSystem ballasts or ballast modules
  • Mounts easily in any single-gang wallbox
  • Fits designer style Claro wallplates