1

MRR2-G – REPEATER & AWAY EMULATOR

|
REPEATER & AWAY EMULATOR, LIGHTING CONTROLS

This is the Repeater & Away Emulator. The Repeat and Away Emulator records the normal usage of lights throughout the home and plays them back while homeowners are away. It also extends the range between the controller (LC7001) and a connected device by 100 ft. per repeater. Up to two repeaters are supported for a maximum coverage distance of 300 ft.

Everyone wants a home that’s a step above ordinary. Now the radiant ® collection of switches, outlets, dimmers and home automation controls by Legrand puts that stylish finishing touch affordably within reach. radiant gets rid of unsightly screws, delivering clean looks in a range of colors and metallic finishes. Put more modern convenience at your fingertips. Go more radiant. Check out the radiant collection.



RR-MAIN-REP-WH – RadioRA 2 MAIN REPEATER

|
RadioRA 2 MAIN REPEATER, LIGHTING CONTROLS

This is the RadioRA 2 main repeater. RadioRA® 2 Repeaters extend the range of Radio Frequency (RF) signals that are sent between devices. Repeaters ensure error-free communication between system components and prevent interference from neighboring systems. For systems that extend up to 30 ft. (9 m), one (1) Main Repeater is required to set up the system. Up to four (4) Auxiliary Repeaters can be added to extend the RF range for larger system applications. Each Repeater has an RF range of 30 ft. (9 m), covering a total area of approximately 2500 ft2 (232 m2). Check out the RadioRA 2 products page here.

  • Test button: enters the system diagnostic mode.
  • Can be programmed from a PC.
  • RS485 port to connect to other Repeaters through a wired link (daisy-chain).
  • Main Repeaters allow configuration and integration to the system through Ethernet or RS232 ports.
  • System with 2 Main Repeaters must be connected via Ethernet.