• Supports up to 50 wireless devices (Caséta Wireless dimmers, plug-in dimmers, and switches, PicoR remote controls, wireless shades). Smart Bridge/Smart Bridge PRO counts as one device.
• Programmed via the Lutron App (available for iOS and Android).
• Scene control via the Lutron App.
• Timeclock scheduling of daily events via the Lutron App.
• Connects to Wi-Fi router via Ethernet.
• Local device operation will continue to function if internet connection is lost or Smart Bridge/Smart Bridge PRO is powered down or not communicating.
• System access from anywhere in the world using the Lutron App.
• Supports Caséta Wireless devices, Serena shades, and Pico remote controls.
• Control outside the app via widgets (iOS and Android).
• Supports Geofencing from the Lutron App.
• Control from Apple Watch.
• Supports Siri and Apple HomeKit technology.

• Supports up to 50 wireless devices (Caséta Wireless dimmers, plug-in dimmers, and switches, PicoR remote controls, wireless shades). Smart Bridge/Smart Bridge PRO counts as one device.
• Programmed via the Lutron App (available for iOS and Android).
• Scene control via the Lutron App.
• Timeclock scheduling of daily events via the Lutron App.
• Connects to Wi-Fi router via Ethernet.
• Local device operation will continue to function if internet connection is lost or Smart Bridge/Smart Bridge PRO is powered down or not communicating.
• System access from anywhere in the world using the Lutron App.
• Supports Caséta Wireless devices, Serena shades, and Pico remote controls.
• Control outside the app via widgets (iOS and Android).
• Supports Geofencing from the Lutron App.
• Control from Apple Watch.
• Supports Siri and Apple HomeKit technology.
• Supports Sivoia QS Triathlon and select Sivoia QS Wireless shades (venetian and horizontal sheer blinds are not supported).
• Integration with select A/V and security systems (see www.casetawireless.com/integration for details).

This is the Lightcloud controller. The Controller is the basic building block of the Lightcloud system. Use it for switching and 0-10V dimming. Deploy it for power management. Or simply use it to extend the range of your Lightcloud mesh network.

• Easy setup – simply power on, confirm device connectivity and call 844-LIGHTCLOUD
• Cylindrical design for easy installation at threaded junction boxes
• Cloud-based management – no software to install or maintain
• Connects to Lightcloud Gateway and other Lightcloud devices
• Connects via a secure, encrypted, and self-healing 2.4 GHz wireless mesh network
• Repeater Mode to extend range of wireless mesh network
• If power to Controller is lost, notification is shown in the Lightcloud application
• If communication is lost, Controller can fall back to a customizable emergency state

RAB Lighting creates high quality, affordable, well designed and energy efficient indoor and outdoor LED lighting, fixtures, sensors and controls. Check out the RAB Lighting Controls page.

This is the digital forward phase dimming room controllers (LMRC-221, LMRC-222). LMRC-220 Series Digital Room Controllers include one or two output(s) to control a total of up to 20 amps. Load ratings include incandescent, magnetic low voltage, forward phase compatible electronic low voltage and LED drivers, neon and cold cathode, and dimmable two-wire and three-wire fluorescent ballasts. They are the foundation of a WattStopper Digital Lighting Management (DLM) system, and allow integration of occupancy sensors, daylighting controls and switches for energy-efficient lighting control. Check out Wattstopper DLM products here.

FEATURES:

• Plug n’ Go™ automatic configuration for quick installation and maximum energy savings
• Push n’ Learn™ functionality for personalization without the need for tools or a PC
• Digital Lighting Management components plug together on free-topology Cat 5e DLM local network
• On/Off/Dim local override button for each load
• LED indicates status of each load
• Integral current monitoring of total connected load
• Optional lamp burn in; 12 or 100 hours
• Square law, 2-wire and 3-wire fluorescent/LED curves
• 4 RJ45 ports with integral strain relief
• Zero-crossing circuitry for each relay for reliability and increased product life
• UL 2043 plenum rated
• RoHS compliant

This is the Touche Master Interface.

• Master Interfaces provide coordinated control for all of the system’s connected devices and act as a “gateway” to an Ethernet network.
• Up to (100) directly connected devices can be controlled by one Master Interface. If Multi-Function Interfaces are implemented up to (3200) devices can be controlled by one Master Interface.
• Auto-addressing of all connected devices is coordinated by the Master Interface.
• Both static and dynamic IP addressing is permitted for simple and adaptable setup when Ethernet communication is required.
• The Master Interface monitors the status of all connected devices, displays that information locally, and forwards relevant information to the programming application when appropriate.

WattStopper LMIO-101 INPUT/OUTPUT INTERFACE. The LMIO-101 Input/Output Interface allows seamless integration with third party devices to provide additional functionality in a Digital Lighting Management (DLM) system. The LMIO-101 operates on power from the DLM local network. It contains a 24VDC isolated relay (single-pole, double throw with normally open (N/O), normally closed (N/C), and common outputs) for output to other systems. The isolated relay can
respond to any DLM occupancy sensor on the DLM local network. The LMIO-101 also includes a 24VDC output and four input terminals for maintained or momentary switch closure inputs, or third party logic inputs. Input signals may come from a wide variety of devices including building automation systems, time clocks and key switches, for purposes including hold-on/ hold-off, load shedding and cleaning. The LMIO-101 has DIP switch-selectable profiles to allow different combinations of
input signals to control different loads.

Features

• Plug n’ Go™ configuration for quick and easy startup out of the box
• Push n’ Learn™ functionality for personalizing system
settings to accommodate application needs
• Self-contained switching power supply and relay system
• Five status LEDs and configuration LED
• Hold-on/hold-off, occupancy sensor, time clock, load shed, cleaning switch and key switch modes available through DIP switch configurations
• Over-current protection
• UL 2043 plenum rated
• The product meets the materials restrictions of RoHS
• BAA/TAA-compliant models available

Specifications

Input/output voltage: 24VDC from DLM network
• Maximum current consumption: 20mA
• DLM local network connection: 2 RJ45 ports
• Removable terminal block for connections to isolated relay output and third party inputs
• Isolated relay ratings:
– 24VDC/VAC, 1A, SPDT
– Normally open (N/O), normally closed (N/C) and common outputs
– Duplicates the functionality of the LMRL-100
• Input ratings:
– Input max. sink/source current: 1- 5 mA
– Logic input signal voltage High: >18 VDC
– Logic input signal voltage Low: < 2 VDC
• Operating conditions; for indoor use only; 32-131°F (0-55°C)
• Fits inside 4” x 4” j-box, 1 gang back box or 3” octagonal box; optional DIN rail mounting
• UL and cUL listed
• Five year warranty

For other items like the WattStopper LMIO-101 INPUT/OUTPUT INTERFACE click here.

For more information on WattStopper’s line of lighting control solutions click here.

WattStopper LMIO-102 PARTITION INTERFACE. The LMIO-102 Partition Interface automatically coordinates lighting controls in flexible spaces with up to four movable walls equipped with contact closures. It is part of a Digital Lighting Management (DLM) system, and can reconfigure connected switches and occupancy sensors.

Features

• Push n’ Learn™ functionality for personalizing system settings to accommodate application needs
• Four status LEDs indicate if walls are open or closed
• Two RJ45 ports with hinged dust cover
• UL 2043 plenum rated
• The product meets the materials restrictions of RoHS
• BAA/TAA-compliant models available

Specifications

• Input voltage: 24VDC from DLM local network
• Current consumption: 20mA
• DLM local network connection: 2 RJ45 ports
• Removable terminal block for connections to third party contact closure inputs
• Input ratings:
– Input max. sink/source current: 1- 5 mA
– Logic input signal voltage High: >18 VDC
– Logic input signal voltage Low: < 2 VDC
• Operating conditions: for indoor use only; 32-104°F (0-40°C)
• Fits inside 4” x 4” j-box, 1 gang back box or 3” or 4” octagonal box; optional DIN rail mounting
• UL and cUL listed
• Five year warranty

For other items like the WattStopper LMIO-102 PARTITION INTERFACE click here.

For more information on WattStopper’s line of lighting control solutions click here.

WattStopper LMRC-110 SERIES 0-10V DIMMING ROOM CONTROLLERS (LMRC-111, LMRC-112). LMRC-110 series room controllers include one or two relay(s) to switch a total of 10 amps, a high-efficiency switching power supply and dual 0-10 volt outputs per relay for control of dimmable loads including compatible LED drivers or electronic ballasts. They are the foundation of a Digital Lighting Management (DLM) system, and allow integration of occupancy sensors, daylighting controls and switches for energy-efficient control.

LMRC-110 series room controllers operate on one 120 or 277
volt, 10 amp feed and provide Class 2 power to sensors and
switches via the DLM local network. Once powered up, Plug n’
Go automatically configures system components for the most
energy-efficient operation. The room controllers then dim or
switch lighting or motor loads in response to input from the
communicating devices. When a dimming input is received, the
relay switches on when the dimmed level rises above zero, and
off when it reaches zero, to coordinate control of power and the
0-10 volt signal to the load. They also monitor the current draw
of the total connected load. Each room controller stores up to
16 scene preset levels for each dimmed output.

Features

• Push n’ Learn™ functionality for personalization without the need for tools or a PC
• Digital Lighting Management components plug together on a free-topology Cat 5e DLM local network eliminatingwiring errors
• On/Off/Dim local override button for each load
• LED indicates status of each load
• Optional lamp burn in; 12 or 100 hours
• Optional instantaneous current and voltage measurement of total connected load
• 2 RJ45 ports; molded cable tie ring for strain relief
• Zero-crossing circuitry for each relay for reliability and increased product life
• UL 2043 plenum rated
• This product meets the materials restrictions of RoHS
• U.S.-made models available for public works projects

Specifications

• Voltage: 120/277VAC; 50/60Hz
• Maximum 10A combined load per Room Controller; each relay rated for 10A ballast, E-ballast or incandescent
• Galvanically isolated Class 1 pigtails and Class 2 terminals for 0-10VDC signal; sinks up to 50mA per output (Class 1/
Class 2) per channel for control of compatible ballasts (25 if each sources 2mA)
• Intelligently controlled Class 2 output to DLM local network: 24VDC, up to 150mA across 2 RJ45 ports
• DLM local network parameters:
– Maximum current: 800mA
– Category 5e cable: 150’ per device to 1,000’ max.
– Up to 64 loads
– Up to 48 communicating devices
– Maximum 4 LMPB-100, LMPL-101 or LMRC-100 Series Room Controllers
• Requires LMCS 4.5.1, Segment Manager 2.1.23, or LMCT 5.24
(or later)
• Operating conditions: for indoor use only; @120/277V:
32-131°F (0-55°C); 5-95% RH, non-condensing
• UL and cUL listed (E101196)
• FCC part 15 compliant
• Five year warranty

For other items like the WattStopper LMRC-110 SERIES 0-10V DIMMING ROOM CONTROLLERS click here.

For more information on WattStopper’s line of lighting control solutions click here.