• Large tapswitch with a rocker-style dimmer for a standard designer wallplate opening
• Advanced dimming technology designed for compatibility with a broader range of high efficacy bulbs
• UL Listed to control:
  • Dimmable Compact Fluorescent Lamps (CFL) with integrated ballast
  • Dimmable LED with integrated driver
  • Halogen
  • Incandescent

Power packs are the heart of the low voltage sensor system. A PP20 Series power pack transforms
Class I high voltage (120/277 VAC or 347 VAC) to Class 2 15 VDC for powering remote sensors. The
PP20 and the SP20 Series slave pack are also capable of switching lighting loads on and off using
their internal relays. Class 2 wire leads connect to 18 to 22 AWG low voltage cable running to the
sensors, making installation easy and clean. Power packs also have an elongated chase nipple that
allows it to be mounted either directly through a ½ inch knockout into a junction box, or inside an
adjacent box for meeting specific local code requirements in ceiling plenums.
The most versatile power pack is the PP20, which utilizes a patented relay contact protection and
can power up to 14 sensors. Dual-circuit control can be handled by two PP20’s, one PP20 2P Series
2-Pole power pack, or a PP20 power pack and a SP20 slave packs.
FEATURES

•  Powers Low Voltage Sensors (PP20/PP20 2P only)
•  Self-Contained Relay(s) Switch Line Voltage Loads
• Relay Contact Protection
• Plenum Rated

This is the Single Pole Relay Module.

• Incorporates the latest in “zero-cross” switching technology to greatly extended relay switching life.
• Relay Modules communicate with the Master Interface to report:
  • The relay’s current state (on/off)
  • The line source state (available or off)
  • The line frequency (in Hz)
  • The communication status (active / not available)
  • The relay’s “health.” (if the relay is defective
• Relay Modules are interchangeable with all other RD style relay and dimming modules.

• 120/277V
• Paddle turns on/off
• Use with any 15A load
• General purpose switching of all sources and motor loads
• No derating if ganged

• 120V ONLY
• Paddle turns on/off
• Use with any 15A load
• General purpose switching of all sources and motor loads
• No derating if ganged

WattStopper LMRL-100 ISOLATED RELAY INTERFACE. The LMRL-100 Isolated Relay Interface is an optional component for a Digital Lighting Management (DLM) system. It enables seamless integration of third party devices such as HVAC systems or exhaust fans. The LMRL-100 device contains a single-pole, double throw isolated relay with normally open (N/O), normally closed (N/C) and common outputs. While the LMRL-100 resides on a DLM local network, it only receives signals from other devices on the network and does not transmit data via the DLM protocol. Furthermore, the device is not assignable to a specific load or room controller. The LMRL-100 activates in response to a
signal from any DLM occupancy sensor on the network.

Features

• Integrates Wattstopper Digital Lighting Management with any analog low voltage device
• Single LED for relay status
• Over-current protection
• Two RJ45 ports with hinged dust cover
• UL 2043 plenum rated
• The product meets the materials restriction of RoHS

Specifications

• Operating voltage: 24VDC from DLM network
• Isolated relay ratings:
– 24VDC/VAC, 1A, SPDT
– Normally open (N/O), normally closed (N/C) and common outputs
• Current consumption: 7mA
• DLM local network connection: 2 RJ45 ports
• Operating conditions: for indoor use only; 32-104°F (0-40°C)
• Fits inside 4” x 4” j-box, 1-gang back box or 3” octagonal box; optional DIN rail mounting
• UL and cUL listed
• FCC part 15 compliant

For other items like the WattStopper LMRL-100 ISOLATED RELAY INTERFACE click here.

For more information on WattStopper’s line of lighting control solutions click here.