This is the LC&D 4 relay blue box lighting control panel. Check out our Acuity products here.

• Master Lighting Control Panel in Surface Mount Enclosure
• Modem for Programming Support via Factory (order with Modem)
• Order Pre-Programmed for Easy No Hassle Installation
• 100% Digital 32 Channel Astronomical Time Clock
• Built-In Photocell Input on Board
• 4 Relays
• Link Multiple Panels and Switches via Cat 5 Cable
• Connect Up to 16 Digital Devices

This is the LC&D 8 Relay Blue Box Lighting Control Panel GR1408LT. Check out our Acuity products here.

• Master Panel in Surface Mount Enclosure
• Order Pre-Programmed for Easy No Hassle Installation. Click here to add to your cart.
• 100% Digital 32 Channel Astronomical Time Clock
• Built-In Photocell Input on Board
• 8 Relays
• Link Multiple Panels and Switches via Cat 5 Cable
• Connect Up to 16 Digital Devices
• Other options available! Request a quote on our chat box.

The LC&D 8 Relay Blue Box Lighting Control Panel GR1408LT is a cost effective, simple alternative to traditional time clocks, twist timers and contactor packages. The series comes in three enclosure sizes, each with a compact footprint. The Blue Box LT Series is ideal for small-to-medium projects, and arrives pre-assembled and ready for installation. The Master Panel may be networked with up to 16 digital devices including Remote relay panels, switches and photocell. The Master Panel has an input for an outdoor photosensor which may be programmed to control any relay(s) on the bus. The Blue Box LT Series is compatible with LC&D~8217;s GR 2400 system accessories. Blue Box LT remote panels may also be used on GR 2400 systems.

This is the single zone switching & dimming closed loop digital photosensor. The LMLS-400 is a closed loop photo sensor that measures the ambient light level in order to automatically switch or dim one zone of lighting. It is part of a Digital Lighting Management (DLM) system and sends light level signals to control loads connected to DLM on/off or dimming room controllers. The LMLS-400 has a photodiode with an extended range of 1-6,553 foot-candles (fc), and photopic correction to mimic the human eye, for precise measurement of visible light. Check out Wattstopper DLM products here.

FEATURES:

• Digital Lighting Management components plug together on a free-topology Cat 5e DLM local network
• Test mode override of programmed time delay allows easy verification of selected settings
• Load status verification allows confirmation and testing of controlled load
• Infrared (IR) transceiver for wireless configuration and control
• Compatible with DLM wall switches for manual override, if desired
• LED status indicators
• Mounting options for hard ceilings, dropped ceilings and suspended lighting fixtures
• Complies with California Title 24, Section 119 requirements
• The product meets the materials restrictions of RoHS
• BAA/TAA-compliant models available

**See LMLS MB for mounting bracket options**

WattStopper LMLS-600 DUAL LOOP SWITCHING & DIMMING PHOTOSENSOR. The LMLS-600 is a dual loop photosensor that automatically switches or dims one zone of lighting based on ambient light and daylight levels. It has two silicon photodiodes with an extended range of 1–10,000 footcandles (fc) and features photopic correction to mimic the human eye’s perception of daylight. The LMLS-600 is part of a Digital Lighting Management (DLM) system and sends light level signals to control loads connected to DLM on/off or dimming room controllers.

Features

• Can be calibrated in any daylight condition
• Test Mode override of programmed time delay allows easy verification of selected settings
• Infrared (IR) transceiver for wireless configuration and control
• Recalibrates every night to account for reflectance changes within the space
• Compatible with DLM wall switches for manual override, if desired
• LED status indicators
• RJ45 jack for connection to free-topology Cat 5e DLM local network
• Complies with California Title 24, Section 119 requirements
• The product meets the materials restrictions of RoHS

Specifications

• Input voltage: 24 VDC from DLM local network
• Current consumption: 7 mA
• DLM local network connection: 1 RJ45 port
• Digital multi-band photosensor range: 1–10,000 fc (10–107,000 lux)
• Spatial response:
– Closed loop, selectable 70º or 30º
– Open loop, 60º
• LED status and configuration indicators
• Infrared (IR) transceiver
• Weight: 1.1 oz (31 g)
• Operating conditions: for indoor use only; 32–131ºF (0–55ºC); less than 90% RH, non-condensing
• UL and cUL listed
• FCC part 15 compliant
• Five year warranty

For other items like the WattStopper LMLS-600 DUAL LOOP SWITCHING & DIMMING PHOTOSENSOR click here.

For more information on WattStopper’s line of lighting control solutions click here.