This is the Line Voltage & 3-Wire Dimming Module.

• Software configurable for either forward or reverse phase control.
• Utilize a relay ahead of the dimmer for complete disconnection from the source voltage when the dimmer is off.
• Dimming Modules are completely compatible with 3-wire fluorescent dimming ballasts (Hot, Dimmed Hot and Neutral).
• Dimming Modules communicate with the Building Management Server to report:
  • The dimmer’s current dimming level (0-100% on)
  • The line source state (available or off)
  • The communication status (active / not available)
  • The module’s “health” (if the module is defective)

This is the Local Relay Module w/ optional, 2-channel, 0-10V Dimming.

• Provide a distributed control solution which allows the installer to place the module in close proximity to the controlled load.
• Can be connected directly to a master interface or through multi-function interfaces.
• Local Relay Modules each encompass (2) latching (mechanically held) single pole relays and each module incorporates the latest in “zero-cross” switching technology for improved equipment life.
• Include (3) “smart ports.” Each smart port provides a daisy-chained connection for up to (8) smart devices and are connected to the Local Relay Modules via standard Cat5 patch cables.

This is the Touche Master Interface.

• Master Interfaces provide coordinated control for all of the system’s connected devices and act as a “gateway” to an Ethernet network.
• Up to (100) directly connected devices can be controlled by one Master Interface. If Multi-Function Interfaces are implemented up to (3200) devices can be controlled by one Master Interface.
• Auto-addressing of all connected devices is coordinated by the Master Interface.
• Both static and dynamic IP addressing is permitted for simple and adaptable setup when Ethernet communication is required.
• The Master Interface monitors the status of all connected devices, displays that information locally, and forwards relevant information to the programming application when appropriate.

This is the Single Pole Relay Module.

• Incorporates the latest in “zero-cross” switching technology to greatly extended relay switching life.
• Relay Modules communicate with the Master Interface to report:
  • The relay’s current state (on/off)
  • The line source state (available or off)
  • The line frequency (in Hz)
  • The communication status (active / not available)
  • The relay’s “health.” (if the relay is defective
• Relay Modules are interchangeable with all other RD style relay and dimming modules.

This is the Two-Pole Step Relay Module.

• Works with step ballasts to provide multi-level lighting control from a single panel slot.
• Utilizes dual 30A relays that are each de-rated to 16A
• Each module incorporates the latest in “zero-cross” switching technology to greatly extend relay switching life.
• Relay Modules communicate with the Master Interface to report:
  • The relay’s current state (on/off)
  • The line source state (available or off)
  • The communication status (active / not available)
  • The relay’s “health.” (if the relay is defective)