WattStopper LMRH-101 DIMMING IR REMOTE CONTROL. The LMRH-101 Dimming IR Remote Control is a handheld personal control device for convenient on/off and raise/lower control of any load(s) connected to Digital Lighting Management (DLM) dimming room controllers. It uses an infrared transceiver to communicate with a DLM system via any DLM IR-enabled devices. The LMRH-101 operates on battery power. By default, it controls all loads on the DLM local network. The load assignment may be quickly reconfigured using Push n’ Learn.
To turn the load on, the user simply presses the top of the control button. Pressing the bottom of the button turns lights off. To raise or lower dimmable loads, the user presses and holds the top or bottom of the button until lighting reaches the desired level. The LMRH-101 will work with any DLM local network, operating all loads if in default mode, or the load(s) it has been configured to control.

Features

• Provides remote IR dimming control of lighting in a DLM system in conjunction with at least one dimming room controller
• Hidden configuration button for easy access to Push n’ Learn
• Communicates with DLM local network through any DLM
IR-enabled device
• Battery operated
• Includes wall mount holster and all necessary mounting hardware
• Can control one or more loads
• LED confirms button presses
• The product meets the materials restrictions of RoHS

Specifications

Operates on 3 AAA 1.5 volt batteries (included)
• DLM local network connection: IR transceiver
– Range of IR transmission: up to 32 ft. (10m)
– Angle of IR reception: 30°
• 1 control button with LED indicator
• Hidden configuration button to access Push n’ Learn
• Weight: approx. 3.2 oz. (91g), without mounting bracket
• Operating conditions: for indoor use only; 32-95°F (0-35°C); 5-95% RH, non-condensing
• FCC part 15 compliant
• Five year warranty

For other items like the WattStopper LMRH-101 DIMMING IR REMOTE CONTROL click here.

For more information on WattStopper’s line of lighting control solutions click here.

WattStopper LMRH-102 2-BUTTON IR REMOTE CONTROL. The LMRH-102 2-Button IR Remote Control is a handheld
on/off personal control device for convenient control of any
loads connected to Digital Lighting Management (DLM) room
controllers. It uses an infrared transceiver to communicate with
a DLM system via any DLM IR-enabled devices.

The LMRH-102 operates on battery power and transmits a digital signal for on or off whenever a pushbutton is pressed by a user. By default, the top button controls the first load in the system and the bottom button controls the second load. Button assigments may be quickly reconfigured using Push n’ Learn. The LMRH-102 will work with any DLM local network, operating loads one and two, if in default mode, or the loads it has been configured to control.

Features

Provides infrared (IR) control of two lighting loads or zones in a DLM system
• Hidden configuration button for easy access to Push n’ Learn™
• Communicates with DLM local network through any DLM IR-enabled device
• Battery operated
• Includes wall mount holster and all necessary mounting hardware
• Each button can control individual or multiple loads
• LEDs confirm button presses
• The product meets the materials restrictions of RoHS

Specifications

Operates on 3 AAA 1.5 volt batteries (included)
• DLM local network connection: IR transceiver
– Range of IR transmission: up to 32 ft. (10m)
– Angle of IR reception: 30°
• 2 control buttons, each with LED indicator
• Hidden configuration button to access
• Push n’ Learn
• Weight: approx. 3.2 oz. (91g), without mounting bracket
• Operating conditions: for indoor use only; 32-95°F (0-35°C); 5-95% RH, non-condensing
• FCC part 15 compliant
• Five year warranty

For other items like the WattStopper LMRH-102 2-BUTTON IR REMOTE CONTROL click here.

For more information on WattStopper’s line of lighting control solutions click here.

WattStopper LMRL-100 ISOLATED RELAY INTERFACE. The LMRL-100 Isolated Relay Interface is an optional component for a Digital Lighting Management (DLM) system. It enables seamless integration of third party devices such as HVAC systems or exhaust fans. The LMRL-100 device contains a single-pole, double throw isolated relay with normally open (N/O), normally closed (N/C) and common outputs. While the LMRL-100 resides on a DLM local network, it only receives signals from other devices on the network and does not transmit data via the DLM protocol. Furthermore, the device is not assignable to a specific load or room controller. The LMRL-100 activates in response to a
signal from any DLM occupancy sensor on the network.

Features

• Integrates Wattstopper Digital Lighting Management with any analog low voltage device
• Single LED for relay status
• Over-current protection
• Two RJ45 ports with hinged dust cover
• UL 2043 plenum rated
• The product meets the materials restriction of RoHS

Specifications

• Operating voltage: 24VDC from DLM network
• Isolated relay ratings:
– 24VDC/VAC, 1A, SPDT
– Normally open (N/O), normally closed (N/C) and common outputs
• Current consumption: 7mA
• DLM local network connection: 2 RJ45 ports
• Operating conditions: for indoor use only; 32-104°F (0-40°C)
• Fits inside 4” x 4” j-box, 1-gang back box or 3” octagonal box; optional DIN rail mounting
• UL and cUL listed
• FCC part 15 compliant

For other items like the WattStopper LMRL-100 ISOLATED RELAY INTERFACE click here.

For more information on WattStopper’s line of lighting control solutions click here.

WattStopper LMSW-100 SERIES DIGITAL WALL SWITCH. LMSW-100 Series Wall Switches are low voltage devices for
energy-saving manual on/off control of one or more loads from one or more locations. They are part of a Digital Lighting Management (DLM) system and can control any load(s) connected to DLM room controllers. LMSW-100 Series Switches operate on Class 2 power supplied to a DLM local network by one or more room controllers. The switches send a digital signal for on or off whenever a pushbutton is pressed by a user. Plug n’ Go™ automatic configuration assigns each load to a switch button upon
system startup. If the number of buttons equals the number of loads, each button operates one load. If there are more loads than buttons, the last button controls multiple loads. Any extra buttons are unassigned. When multiple switches are installed, default operation is for multi-way control; each switch controls all of the loads on the system. Button assignments may be quickly reconfigured using Push n’ Learn™. Button configuration may be changed from load control to scene control using DLM configuration tools.

Features

• Hidden configuration button for easy access to Push n’ Learn
• Digital Lighting Managment components plug together on a free-topology Category 5e DLM local network
• Infrared (IR) transceiver for wireless configuration and control
• Sleek single gang devices fit decorator wall plates; 1-, 2-, 3-, 4-, and 8-button models
• Each button can control individual or multiple loads, or one scene; LED indicates status
• Each switch button can be used to dim the load
• Switches may be used for multi-way control
• Six color options and custom engraving options; standard buttons may be replaced in the field
• The product meets the materials restrictions of RoHS
• BAA/TAA-compliant models available

Specifications

• Input voltage: 24VDC from DLM local network
• Current consumption: 5mA
• DLM local network connection: 2 RJ45 ports
• 1, 2, 3, 4 or 8 control buttons, each with LED status indicator
• Hidden configuration button to access
• Push n’ Learn
• Infrared (IR) transceiver
• Operating conditions: for indoor use only; 32-131°F (0-55°C); 5-95% RH, non-condensing
• UL and cUL listed
• FCC part 15 compliant
• Five year warranty

For other items like the WattStopper LMSW-100 SERIES DIGITAL WALL SWITCH click here.

For more information on WattStopper’s line of lighting control solutions click here.

WattStopper LMUC-100-2 ULTRASONIC CEILING MOUNT OCCUPANCY SENSOR. The LMUC-100 low profile Digital Ultrasonic Ceiling Mount Occupancy Sensor uses ultrasonic diffusion technology to
achieve 360° occupancy sensing for energy-efficient control of lighting and plug loads. It is a digital sensor, and is part of a Wattstopper Digital Lighting Management (DLM) system.

Features

• Plug n’ Go™ automatic configuration for quick installation and maximum energy savings
• Push n’ Learn™ functionality for customization without the need for tools or a PC
• Digital Lighting Management components plug together on a free-topology Category 5e DLM local network
• Infrared (IR) transceiver for wireless configuration and control
• Ultrasonic diffusion technology spreads coverage to a wider
area (patented); 40KHz signal
• Detection Signature Processing eliminates false triggers and provides immunity to RFI and EMI
• Sensor coverage tested to NEMA Guide Publication WD 7-2000
• The product meets the materials restrictions of RoHS
• BAA/TAA-compliant models available

Specifications

• Input voltage: 24VDC from DLM network
• Current consumption: 20mA
• DLM local network connection: 2 RJ45 ports
• LCD display and pushbuttons for setting sensor and system parameters
• Infrared (IR) transceiver
• Ultrasonic frequency: 40 kHz
• Coverage: Major motion, 1,000 ft2 (93 m2) Minor motion, 450 ft2 (42 m2)
• Operating conditions: for indoor use only; 32-104°F (0-40°C); 5-95% RH, non-condensing
• UL and cUL listed
• FCC part 15 compliant
• Five year warranty

For other items like the WattStopper LMUC-100-2 ULTRASONIC CEILING MOUNT OCCUPANCY SENSOR click here.

For more information on WattStopper’s line of lighting control solutions click here.

WattStopper LP8S-4-115 – LP8 PEANUT PANEL W/ 4 RELAYS. This is the LP8 peanut panel w/ 4 relays. WattStopper’s LP8 Peanut Lighting Control Panels provide simple, effective zone-based control of exterior and interior lighting in small applications. Panels control up to eight channels or zones of lighting. Zones respond to control signals from the system clock (or other signaling device) to turn lighting on and off. LP8 Panels ship pre-assembled in easy-to-install compact packages available for surface and flush mounting. They consist of relays, a system clock, panel intelligence, power supply, tub and cover. The standard enclosure is NEMA 1-rated.

Features

• Preprogrammed control scenarios; seven-day format with holiday scheduling, astronomic control and automatic daylight savings
• Time retained during power outage; nonvolatile program memory
• Eight universal switch inputs for low voltage switches, occupancy sensors, photocells or other devices to directly control each relay
• Pushbuttons for manual override of each relay
• Uses individually replaceable HDR5P Mechanically Latching Relay with integral manual override
• Optional group of eight switch inputs for pushbutton grouping of relays (Smartwiring™)
• LED for visual indication of relay status
• Accepts most types of switch inputs
• Separate high voltage and low voltage sections for user protection

Specifications

• Multiple power supplies available: 115/277
VAC, 220-240 VAC, 115/347 VAC; 50/60 Hz
• Relay: Mechanically latching Integral manual override Individually replaceable
UL 20 listed for receptacle circuit control
Ratings: 20 Amp tungsten @ 120 VAC
30 Amp ballast @ 277 VAC
20 Amp ballast @ 347 VAC
30 Amp resistive @ 347 VAC
1.5 hp @ 120 VAC
• Accessory power 800 mA at 24 VDC/VAC/VACR
• Eight universal switch inputs; compatible with 3-wire momentary or maintained, 2-wire momentary or maintained, or 24 VDC input
• Eight universal group switch inputs that allow pushbutton grouping of relays (optional)
• Ambient temperature 32-139°F (0-60°C); 5-95% RH non-condensing
• Dimensions: 15.08” x 16.5” x 4.62” (383.0mm x 419.1mm x 117.3mm) L x W x D
• UL and cUL listed; one-year warranty

For other items like the WattStopper LP8S-4-115 LP8 PEANUT PANEL W/ 4 RELAYS click here.

For more information on WattStopper’s line of lighting control solutions click here.

WattStopper LP8S-8-115 LP8 PEANUT PANEL W/ 8 RELAYS. This is the LP8 peanut panel w/ 8 relays. WattStopper’s LP8 Peanut Lighting Control Panels provide simple, effective zone-based control of exterior and interior lighting in small applications. Panels control up to eight channels or zones of lighting. Zones respond to control signals from the system clock (or other signaling device) to turn lighting on and off. LP8 Panels ship pre-assembled in easy-to-install compact packages available for surface and flush mounting. They consist of relays, a system clock, panel intelligence, power supply, tub and cover. The standard enclosure is NEMA 1-rated.

Features

• Preprogrammed control scenarios; seven-day format with holiday scheduling, astronomic control and automatic daylight savings
• Time retained during power outage; nonvolatile program memory
• Eight universal switch inputs for low voltage switches, occupancy sensors, photocells or other devices to directly control each relay
• Pushbuttons for manual override of each relay
• Uses individually replaceable HDR5P Mechanically Latching Relay with integral manual override
• Optional group of eight switch inputs for pushbutton grouping of relays (Smartwiring™)
• LED for visual indication of relay status
• Accepts most types of switch inputs
• Separate high voltage and low voltage sections for user protection

For other items like the WattStopper LP8S-8-115 LP8 PEANUT PANEL W/ 8 RELAYS click here.

For more information on WattStopper’s line of lighting control solutions click here.

WattStopper LP8S-8-G-115 LP8 PEANUT PANEL W/ 8 RELAYS GROUP CARD. This is the LP8 peanut panel w/ 8 relays & group card. WattStopper’s LP8 Peanut Lighting Control Panels provide simple, effective zone-based control of exterior and interior lighting in small applications. Panels control up to eight channels or zones of lighting. Zones respond to control signals from the system clock (or other signaling device) to turn lighting on and off. LP8 Panels ship pre-assembled in easy-to-install compact packages available for surface and flush mounting. They consist of relays, a system clock, panel intelligence, power supply, tub and cover. The standard enclosure is NEMA 1-rated.

Features

• Preprogrammed control scenarios; seven-day format with holiday scheduling, astronomic control and automatic daylight savings
• Time retained during power outage; nonvolatile program memory
• Eight universal switch inputs for low voltage switches, occupancy sensors, photocells or other devices to directly control each relay
• Pushbuttons for manual override of each relay
• Uses individually replaceable HDR5P Mechanically Latching Relay with integral manual override
• Optional group of eight switch inputs for pushbutton grouping of relays (Smartwiring™)
• LED for visual indication of relay status
• Accepts most types of switch inputs
• Separate high voltage and low voltage sections for user protection

Specifications

• Multiple power supplies available: 115/277 VAC, 220-240 VAC, 115/347 VAC; 50/60 Hz
• Relay: Mechanically latching
Integral manual override Individually replaceable
UL 20 listed for receptacle circuit control
Ratings: 20 Amp tungsten @ 120 VAC
30 Amp ballast @ 277 VAC
20 Amp ballast @ 347 VAC
30 Amp resistive @ 347 VAC
1.5 hp @ 120 VAC
• Accessory power 800 mA at 24 VDC/VAC/VACR
• Eight universal switch inputs; compatible with 3-wire momentary or maintained, 2-wire momentary or maintained, or 24 VDC input
• Eight universal group switch inputs that allow pushbutton grouping of relays (optional)
• Ambient temperature 32-139°F (0-60°C); 5-95% RH non-condensing
• Dimensions: 15.08” x 16.5” x 4.62” (383.0mm x 419.1mm x 117.3mm) L x W x D
• UL and cUL listed; one-year warranty

For other items like the WattStopper LP8S-8-G-115 LP8 PEANUT PANEL W/ 8 RELAYS GROUP CARD click here.

For more information on WattStopper’s line of lighting control solutions click here.

This is the sensor mounting bracket. The MB-1 is a durable mounting bracket used to install occupancy sensors in a variety of settings. This bracket includes an adjustable plate that allows sensor rotation to achieve the desired angle for optimal coverage. The bracket also includes a built-in bubble level that affords the installer a reliable guide to ensure the bracket is correctly positioned before adjusting the sensor. The MB-1 is constructed of aluminum with a clear powder coating finish. Check out Wattstopper DLM products here.

This is the sensor mounting bracket. The MB-2 is durable mounting bracket used to install occupancy sensors in a variety of settings. This brackets includes an adjustable plate that allows sensor rotation to achieve the desired angle for optimal coverage. The bracket also includes a built-in bubble level that afford the installer a reliable guide to ensure the bracket is correctly positioned before adjusting the sensor. The MB-2 is constructed of aluminum with a clear powder coating finish. Check out Wattstopper DLM products here.

WattStopper RD-200-W PASSIVE INFRARED (PIR) DIMMING WALL SWITCH VACANCY SENSOR. This is the Passive Infrared (PIR) Dimming Wall Switch Vacancy Sensor. The RD-200 PIR Dimming Wall Switch Vacancy Sensor provides preset dimming control and occupancy-based automatic lighting shutoff for applications throughout the home. The RD-200 can dim incandescent loads from a minimum level of 10% to a maximum level of 100%. When the pushbutton is pressed and held, the RD-200 will ramp the lights up and down in a continuous cycle until the pushbutton is released. The dimming direction may be reversed by momentarily releasing the pushbutton and then pressing it again.

• Replaces standard single pole switch or incandescent dimmer
• Low-profile styling
• Choice of four decorator colors; lens is color matched to device
• Includes matching single-gang wall plate
• Lighted pushbutton for visibility in darkened rooms
• Manual-on or automatic-on operation
• Adjustable time delay from 15 seconds to 30 minutes
• Soft start technology to prolong lamp life
• Air gap isolation switch for safe re-lamping
• If enabled, light level sensing prevents automatic-on when adequate daylight exists

For other items like the WattStopper RD-200-W PASSIVE INFRARED (PIR) DIMMING WALL SWITCH VACANCY SENSOR click here.

For more information on Wattstopper’s line of lighting solutions click here.

CHECK OUT THIS CASE STUDY

WS-CaseStudy-GreenHome_OccupancyVacancyTimeswitches

Wattstopper UT-305-X ULTRASONIC CEILING SENSOR. This is the ultrasonic low voltage ceiling sensor. Wattstopper’s UT-300 Ultrasonic Ceiling Sensors automatically turn lighting on and off based on occupancy. The sensors mount on the ceiling with a flat, unobtrusive appearance and provides 360° coverage.

UT-300 Series Sensors operate on 24 VDC, VAC or halfwave rectified. They use 40 KHz high frequency ultrasound to sense occupancy and automatically turn lighting on. When no occupancy is detected for the length of the time delay, lighting automatically turns off. For manual-on operation, the units work with a low-voltage momentary switch.

Features

• Advanced control logic based on RISC microcontroller
provides:
– Advanced Signal Processing eliminates false triggers and
provides immunity to RFI and EMI
– Walk-through mode turns lights off three minutes after
the area is initially occupied – ideal for brief visits such as
mail delivery
• LED indicates occupancy detection
• Coverage 500-2,000 square feet
• Available with isolated relay for integration with BAS or HVAC
• DIP switch simplifies sensor adjustments
• Patented ultrasonic diffusion technology spreads coverage to
a wider area
• UT-300 Series Sensors work with low-voltage momentary
switches for manual control
• Clip mounting system makes ceiling tile installation simple
• Uses plug terminal wiring system for quick and easy
installation
• BAA/TAA-compliant models available
• Sensor coverage tested to NEMA Guide Publication WD 7-2000

Specifications

• 24 VDC/VAC
• Time delays: 5, 10, 15, 20 or 30 minutes, Walk-through/
Test Modes
• Sensitivity adjustment: variable with trimpot
• Ultrasonic frequency: 40 kHz
• UT-300 contains isolated relay with N/O and N/C outputs;
rated for 1 Amp at 30 VDC/VAC
• Mounting options: ceiling tile; 4” square junction box with
double-gang mud ring
• Max. UT-300s per power pack: B=2, BZ=3
Max. UT-305s per power pack: B=3, BZ=4
• Dimensions: 4.5” x 1” (114.3mm x 25.9mm) diameter x depth
• UL and cUL listed
• Five year warranty

For other items like the Wattstopper UT-305-X ULTRASONIC CEILING SENSOR click here.

For more information on Wattstopper’s line of lighting solutions click here.