BZ-200 – LIGHTING & PLUG LOAD POWER PACK
THE BZ-200 POWER PACK IS FLEXIBLE ENOUGH TO CONTROL LIGHTING CIRCUITS, PLUG LOAD CIRCUITS, OR HVAC LOADS INCLUDING SELF-CONTAINED AIR CONDITIONERS, PUMPS, FANS, MOTORS AND MOTORIZED DAMPER CONTROLS. IT IS WELL-SUITED FOR ANY APPLICATION WHICH REQUIRES HIGH-VOLTAGE SWITCHING THROUGH LOW-VOLTAGE CONTROLS. EACH POWER PACK CAN POWER MULTIPLE SENSORS WITH A COMBINED POWER DRAW OF UP TO 225MA. FOR APPLICATIONS WITH MULTIPLE LOADS, INCLUDING LIGHTING AND PLUG LOADS, UP TO FOUR POWER PACKS MAY BE WIRED IN PARALLEL TO ONE OR MORE SENSORS – BY WATTSTOPPER
- Description
- SPECS
- Please visit literite.com for our new store!
- NON VERIFIED
Description
This is the lighting & plug load power pack. The BZ-200 power pack switches connected loads On and Off in response to Wattstopper low voltage occupancy sensors. It also provides up to 225mA at 24VDC to power the sensors. This device is constructed with environmentally friendly materials and is RoHS-compliant.
The BZ-200 consists of a high-efficiency switching power supply and a high-current relay. It has an input of 120-277 VAC, 50/60Hz, and an integral On / Off button to switch out power, allowing the installer to quickly verify load operation. Following installation, the power pack turns the connected load On and Off automatically based on occupancy sensor input. Check out Wattstopper DLM products here.
- Efficient switching power supply provides optimized current output based on number of sensors
- Includes short circuit and thermal protection
- LED indicates status of relay or presence of low-voltage overcurrent
- UL 2043 plenum rated for cost-effective installation
- UL listed for control of lighting and plug loads
- Tested to NEMA 410 criteria for electronic ballast and driver inrush current
- 1/2” threaded nipple attaches to standard electrical enclosures through 1/2” knockouts
- 12 AWG wires on the relay for 20A operation
- The product meets the materials restrictions of RoHS
- BAA/TAA-compliant models available
- Input/output voltage:120-277VAC, 50/60Hz
- Secondary output: 24VDC, 225mA (with relay connected)
- Low-voltage leads rated for 300 volts
- UL-rated 94 V-O plastic enclosure
- Operating conditions: -4 to 131° F (-20 to 55° C); 5-95% RH, non-condensing
- Dimensions: 1.5” x 3” x 2.4” (37mm x 77mm x 61mm) H x W x D with .6“L (15mm) threaded nipple
- UL and cUL listed
- Five-year warranty
NON VERIFIED CONTENT
Related Products
-
WattStopper LMRC-100 SERIES DIGITAL SWITCHING ROOM CONTROLLER
ROOM CONTROLLERS ARE IDEAL FOR SINGLE OR MULTIPLE ZONE ON/OFF LIGHTING CONTROL APPLICATIONS. THE LMRC-101 HELPS SPECIFIERS COMPLY WITH BASIC ASHRAE 90.1 REQUIREMENTS, WHILE THE LMRC-102 IS DESIGNED FOR BI-LEVEL SWITCHING IN IECC, EPAct, CALIFORNIA TITLE 24 OR LEED PROJECTS BY WATTSTOPPER
-
WattStopper LMDC-100 DUAL TECHNOLOGY CEILING MOUNT OCCUPANCY SENSOR
DIGITAL DUAL TECHNOLOGY CEILING MOUNT OCCUPANCY SENSOR W/ PASSIVE INFRARED (PIR) AND ULTRASONIC TECHNOLOGIES TO ACHIEVE PRECISE OCCUPANCY SENSING FOR ENERGY EFFICIENT CONTROL OF LIGHTING AND PLUG LOADS – BY WATTSTOPPER
-
LMPX-100 – PIR CORNER MOUNT OCCUPANCY SENSOR
LMPX-100 SENSORS, WITH DIFFERENT LENSES FOR DIFFERENT SPACES, ARE IDEAL FOR LARGE AREAS INCLUDING LARGE OFFICES, COMPUTER ROOMS, KINDERGARTEN CLASSROOMS, AISLEWAYS, WAREHOUSES AND OPEN OFFICES WHERE COVERAGE CUT-OFF IS DESIRED.
-
LMDW-100 SERIES – DUAL TECHNOLOGY WALL SWITCH
SENSOR WITH DUAL TECHNOLOGY – APPLICATIONS INCLUDE SMALL PRIVATE OFFICES, EXECUTIVE OFFICES, SMALL AND MEDIUM CONFERENCE ROOMS AND LUNCH/BREAK ROOMS WHERE ONE TECHNOLOGY ALONE MAY NOT BE SUFFICIENT – BY WATTSTOPPER
-
LMLS MB – PHOTOSENSOR MOUNTING BRACKET
DIGITAL LIGHTING MANAGEMENT (DLM) PHOTOSENSOR MOUNTING BRACKETS
-
WattStopper LMPL-201 – PLUG LOAD CONTROLLER
PLUG LOAD CONTROLLERS SHOULD BE INSTALLED TO SWITCH OUTLETS USED FOR TASK LIGHTING AND NON-ESSENTIAL EQUIPMENT IN OFFICES, LUNCH ROOMS AND BREAK ROOMS AND OTHER AREAS IN COMMERCIAL BUILDINGS.
-
WattStopper LMRC-110 SERIES 0-10V DIMMING ROOM CONTROLLERS (LMRC-111, LMRC-112)
IDEAL FOR SINGLE OR MULTIPLE ZONE ON/OFF OR DIMMING CONTROL APPLICATIONS INCLUDING PRIVATE OFFICES, OPEN OFFICES, CONFERENCE ROOMS AND CLASSROOMS. METERING MODELS HELP FACILITY MANAGERS WHO WANT TO TRACK BUILDING POWER USAGE FOR LIGHTING OR OTHER LOADS BY WATTSTOPPER
-
WattStopper LMUC-100-2 ULTRASONIC CEILING MOUNT OCCUPANCY SENSOR
THE LMUC-100-2 CAN SENSE MOTION IN AREAS WITH PARTIAL OBSTRUCTIONS, AND IS IDEAL FOR SPACES WITH CEILINGS UP TO TEN FEET HIGH- BY WATTSTOPPER
-
LMSW-105 – 5-BUTTON SCENE SWITCH
IDEALLY SUITED FOR USE IN CONFERENCE AND BOARD ROOMS, CLASSROOMS, TRAINING CENTERS, AND OTHER APPLICATIONS WHERE PRESET SCENE-BASED DIMMING CONTROL IS DESIRED. WORKS WITH LMDM-101 DIGITAL DIMMING WALL SWITCHES TO CREATE A FLEXIBLE AND ELEGANT SMALL DIMMING SYSTEM- BY WATTSTOPPER
-
WattStopper LMCP24 – LMCP 24-RELAY LIGHTING CONTROL PANEL
24-RELAY LIGHTING CONTROL PANEL – BY WATTSTOPPER
