-13%

DM-105 – BI-LEVEL HID CONTROLLER

$96.00 $84.00

THE DM CONTROLLER CAN BE USED IN MANY FACILITIES SUCH AS WAREHOUSES, GYMNASIUMS, PARKING GARAGES, AND RETAIL APPLICATIONS. SINCE THE DM-105 INTEGRATES WITH ALL STANDARD WATTSTOPPER OCCUPANCY SENSORS, DAYLIGHTING AND TIMING PRODUCTS, A BROAD RANGE OF CONFIGURATIONS IS AVAILABLE TO ADDRESS DIFFERENT LIGHTING CONTROL NEEDS. – BY WATTSTOPPER

SKU: DM-105 Category: Tags: ,
   
  • Description
  • SPECS
  • MANUAL
  • Reviews (0)
  • NON VERIFIED

Description

This is the bi-level HID controller. WattStopper’s DM-105 is a control module that switches High Intensity Discharge (HID) lighting based on occupancy or other control signals. By providing bi-level (high/low) control, it eliminates the restrike time problem associated with on/ off control of HID lighting. The module installs on new or existing fixtures and requires a bi-level capacitor, which is installed inside the fixture. Check out Wattstopper DLM products here.

  • Installs on new or existing fixtures and requires a bi-level capacitor installed inside the fixture
  • Utilizes zero crossing to protect relay and increase product life
  • Maintains full light level for 15 minutes during power up to prevent lamp damage
  • Provides instant full light output when DM unit is signaled
  • Multiple modules can be linked together and switched from one controlling device
  • Multi-zone control is possible through connecting DM-105s to multiple controlling devices in a variety of configurations; lets users customize control for each space
  • The DM-105 features an easy installation, mounting directly on to the HID fixture using four wires to the capacitor and ballast

 WS-Cutsheet-DM105

  • For use with Metal Halide (MH), Metal Halide Pulse Start (MHPS), and High Pressure Sodium (HPS) lamps
  • Operates only with Constant Wattage Autotransformer (CWA) type ballasts (compatible with all CWAs); contact WattStopper or ballast manufacturer for capacitor values appropriate for ballast
  • Dual (bi-level) capacitor can be supplied by WattStopper or fixture manufacturer
  • Maximum load rating of 1000 watts for MH, HPS or MHPS lamps
  • More than 100 individual DM-105 units can be connected in series
  • Lamp lighting levels can be reduced to 50% of full power
  • Relay rating: 15A at 250 VAC
  • Operating temperature range: -10-113°F (-23-45°C)
  • Maximum current output of 15mA at 24 VDC
  • Dimensions: 1.8” x 3.8” x 4.6” (47mm x 97mm x 116mm) H x W x D, < 2 lbs.
  • UL and cUL listed
  • Five year warranty

 

Reviews

There are no reviews yet.


Only logged in customers who have purchased this product may leave a review.

NON VERIFIED CONTENT