Sale

EM-24A2 – AC LOW VOLTAGE PHOTOCELL

$81.85 $77.00

THE EM IS A LOW VOLTAGE PHOTOCELL USED FOR CONTROLLING EXTERIOR LIGHTING. IT WORKS WITH WATTSTOPPER POWER PACKS AND LIGHTING CONTROL PANELS (LIGHTING INTEGRATOR AND LP SERIES PANELS) BY SIGNALING A CHANGE IN LIGHT LEVELS TO THE PANEL – BY WATTSTOPPER

Clear
SKU: N/A Categories: , Tags: ,
   
  • Description
  • SPECS
  • Reviews (0)
  • NON VERIFIED

Description

This is the AC low voltage photocell. Typically mounted so the light level window faces the northern sky, the EM photocell provides an ON signal when the ambient light level drops below a preset “dark” setpoint. It then provides a signal OFF as the ambient light level rises above the preset “light” setpoint. The setpoint can be changed for specific applications by opening and closing the photocell’s aperture window. Normally, a lighting control panel or a power pack supplies power to the photocell. The photocell’s relay contact red wires are connected to the panel or to a low voltage controlled load. Check out Wattstopper DLM products here.

  • One set of normally open, isolated relay contacts; contacts are closed when sensed light level is below dark setpoint, open when light level is above light setpoint
  • 8-second time delay and built-in setpoint deadband prevent cycling
  • 1/2” threaded male conduit base for easy mounting on conduit fittings or junction boxes.

Reviews

There are no reviews yet.


Only logged in customers who have purchased this product may leave a review.

NON VERIFIED CONTENT