WattStopper LMCP8 8 RELAY LIGHTING CONTROL PANEL

Description

WattStopper LMCP8 8 RELAY LIGHTING CONTROL PANEL. The LMCP series panel provides simple network-capable lighting control enabling the automation of lighting functions throughout an entire facility. The HDR relays in the panel can respond directly to inputs from Digital Lighting Management (DLM) switches, occupancy sensors, daylight sensors, and input modules.

Relays in each LMCP panel can be assigned to up to 99 automation groups in any combination. Each group can respond to unique scheduled events and light/dark photocell operations set up via an LMCT-100 handheld configuration tool. A group can also respond to schedules sent from a Segment Manager or a BACnet-enabled building automation system (BAS). Individual relays, or groups of relays, can also be controlled by DLM digital switches, occupancy sensors, LMLS series daylight sensors, and LMIO series input modules. Controls are assigned to relays using Push n’ Learn™ directly from the user input device, or via an LMCT-100.

Features

• Standard single pole heavy duty relays UL and cUL listed for both lighting and plug loads
• Available in interiors sized for 8, 24, or 48 relays maximum
• LMCT-100 handheld configuration tool recommended for setup
• Runs event-based schedule routines independently (does not require BAS or Segment Manager)
• Supports astronomical, time-based, and photocell-based event types
• Two free-topology DLM Category 5e local networks for DLM sensors, switches, and LMIO series input modules
• Additional power available for low voltage switches or accessories
• BAA/TAA-compliant models available

Specifications

• Input voltage options, 120/277V 60 Hz, 120/347V, 60 Hz, 240V 50 Hz
• Class 2 connection to two independent DLM local networks:
– 24VDC output, up to 250mA across 2 RJ45 ports per local network
• Free-topology DLM local network segments may include digital switches and sensors; Category 5e cable, up to 1,000 ft. total per local network
• Terminals for connection to DLM segment network (BACnet MS/TP)
• Segment network parameters:
– Wattstopper LM-MSTP wire
– Linear topology; 4000 ft. maximum per segment
• Accessory power available:
– LMCP8, 800 mA @ 24VDC
– LMCP24, 1000 mA @ 24VDC
– LMCP48, 1000 mA @ 24VDC
• HDR relays:
– Coil voltage, 24 VDC, pulse ON and pulse OFF
– Mechanically latched contacts
– ½” K.O. mounting, LV plug-connection, individually replaceable
– UL 20 listed for receptacle circuit control
– Contact ratings:
30 amps ballast @ 277V
20 amps ballast @ 347V
20 amps tungsten @ 120V
30 amps resistive @ 347V
1.5 HP @ 120V
• SCCR (short circuit current rating) 14,000 amps with HDR Heavy Duty Relay
• Operating conditions: for indoor use only; 32-131°F (0-55°C); 5-95% RH, non-condensing
• UL and cUL listed
• Five year warranty

For other items like the WattStopper LMCP8 8 RELAY LIGHTING CONTROL PANEL click here.

For more information on WattStopper’s line of lighting control solutions click here.

LMCP Series Spec Sheet

Specifications:

• 120/277 VAC 60 Hz or 120/347 VAC 60 Hz or 240 VAC 50 Hz
• 800 mA at 24 VDC output

LMCP Installation Instructions

NON VERIFIED CONTENT