- You cannot add "WattStopper LMZC-301 - ZONE CONTROLLER" to the cart because the product is out of stock.
LMRC-220 SERIES – DIGITAL FORWARD PHASE DIMMING ROOM CONTROLLERS (LMRC-221, LMRC-222)
IDEAL FOR MANUAL OR AUTOMATIC LIGHTING CONTROL, INCLUDING DAYLIGHT HARVESTING. APPROPRIATE FOR APPLICATIONS IN CONFERENCE AND TRAINING ROOMS, CLASSROOMS, LECTURE HALLS, EXECUTIVE OFFICES, RESTAURANTS AND GALLERIES – BY WATTSTOPPER
- Description
- Specs
- Manuals
- Please visit literite.com for our new store!
- NON VERIFIED
Description
This is the digital forward phase dimming room controllers (LMRC-221, LMRC-222). LMRC-220 Series Digital Room Controllers include one or two output(s) to control a total of up to 20 amps. Load ratings include incandescent, magnetic low voltage, forward phase compatible electronic low voltage and LED drivers, neon and cold cathode, and dimmable two-wire and three-wire fluorescent ballasts. They are the foundation of a WattStopper Digital Lighting Management (DLM) system, and allow integration of occupancy sensors, daylighting controls and switches for energy-efficient lighting control. Check out Wattstopper DLM products here.
FEATURES:
- Plug n’ Go™ automatic configuration for quick installation and maximum energy savings
- Push n’ Learn™ functionality for personalization without the need for tools or a PC
- Digital Lighting Management components plug together on free-topology Cat 5e DLM local network
- On/Off/Dim local override button for each load
- LED indicates status of each load
- Integral current monitoring of total connected load
- Optional lamp burn in; 12 or 100 hours
- Square law, 2-wire and 3-wire fluorescent/LED curves
- 4 RJ45 ports with integral strain relief
- Zero-crossing circuitry for each relay for reliability and increased product life
- UL 2043 plenum rated
- RoHS compliant
Specifications:
- Input/output voltage: 120/277VAC, 50/60Hz
- Maximum 20A combined load per Room Controller; each output individually rated for: 20A: tungsten, MLV, ELV or LED (forward phase compatible transformers or drivers) 16A: 2-wire fluorescent or neon/cold cathode (electronic or magnetic dimming ballast) or 3-wire fluorescent (electronic dimming ballast)
- Minimum load: 10W
- Class 2 output to DLM local network: 24VDC, up to 250mA across 4 RJ45 ports
- DLM local network parameters: - Maximum current: 800mA - Cat 5e cable: 150’ per device up to 1,000’ max. - Up to 64 loads - Up to 48 communicating devices - Maximum 4 LMPB-100, LMPL-101 or LMRC-100 Series Room Controllers
- Operating conditions: for indoor use only; 32-131°F (0-55°C); 5-95% RH, non-condensing
- UL and cUL listed
- FCC part 15 compliant
- Five-year warranty
NON VERIFIED CONTENT