NCM ADCX RJB – nLIGHT DAYLIGHT SENSOR PRIMARY & SECONDARY ZONES DIMMING

Call for Price

DAYLIGHT HARVESTING PHOTOCELL (DIMMING) MANUFACTURER BY nLIGHT

Clear
SKU: NCM ADCX RJB Categories: , , , , , Tags: , ,
   
  • Description
  • Specs
  • Manuals
  • Reviews (0)
  • NON VERIFIED

Description

This is the nLight daylight sensor primary & secondary zones dimming. The nCM ADCX RJB and nCM PC RJB photocell sensors are ceiling/surface mount devices that provide a range of daylight harvesting features for nLight Control System installations with finished ceilings (e.g. ceiling tiles, sheetrock, plaster). The nCM PC RJB version provides on/off photocell control by default, while the nCM ADCX RJB provides automatic dimming photocell control by default. Ideal for spaces with windows, such as vestibules, corridors, classrooms, or offices, these sensors work by first monitoring daylight conditions in a room. They then signal networked nLight control devices to adjust their dimming outputs (and/or turn lighting off) to obtain maximum energy savings while ensuring adequate lighting levels are maintained. The nCM ADCX RJB sensor controls nLight enabled luminaires (e.g. VTLED Family from Lithonia), nLight dimming relay packs (e.g. nPP16 D or nSP5 PCD), or auxiliary dimming output devices (e.g. nIO D). The nCM PC RJB switches nLight enabled luminaires or any relay/dimming device in an nLight system (e.g. nPP16). Both sensors can also be used together with nLight occupancy sensors. Manual override or adjustment of the dimming level is possible via WallPod dimmers or through the SensorView software. Both versions are powered via the nLight network bus and can communicate with one or more nLight enabled luminaires or nLight relay/dimming packs to enable control of fixtures individually or in groups. These configurations work standalone and do not require a connection to a larger nLight network. Check out Acuity Brands and the nLight story.

FEATURES

  • Automatic Dimming Photocell Control (nCM ADCX RJB model only)
  • Full On/Off Photocell Switching Control (disabled by default on nCM ADCX RJB)
  • Optional Inhibit mode: Photocell can prevent lights from turning on if adequate daylight is available, but does turn lights off
  • LED status indicator
  • Adjustable settings (e.g. set-point) via push-button or SensorView software application
  • Broadcasts photocell information over a local nLight channel
  • Remotely upgradeable firmware

PDF BUTTONnCM ADCX Photocell Spec Sheet

Specifications:

  • Size: 4.55” Dia. (11.56 cm) 1.55” Deep (3.94 cm)
  • Mounting: Ceiling Tile / Sheetrock Surface
  • 3.5” Octagon Box
  • Single Gang Handy Box
  • Color: Matte White
  • nLight Network Ports: 2 RJ-45 (via an included RJ45 splitter)
  • Bus Power Consumption: ~3 mA
  • Wires/Cables: (1) 1ft CAT5e patch cable (factory installed)

Reviews

There are no reviews yet.


Only logged in customers who have purchased this product may leave a review.

NON VERIFIED CONTENT