RS-150BA-N – PIR WALL SWITCH VACANCY SENSOR W/ NIGHTLIGHT
THE RS-150BA-N PIR VACANCY SENSOR REQUIRES NO ADJUSTMENT AND IS IDEAL FOR BATHROOM AND BEDROOM APPLICATIONS WHERE THE SWITCH LOCATION HAS AN UNOBSTRUCTED LINE OF SIGHT OF THE ROOM – BY WATTSTOPPER
- Description
- SPECS
- Please visit literite.com for our new store!
- NON VERIFIED
Description
This is the PIR wall switch vacancy sensor w/ NightLight. The RS-150BA-N Passive Infrared (PIR) Vacancy Sensor provides automatic shutoff for single-pole lighting control applications. It is engineered to comply with specific provisions of California’s Title 24-2013 energy code.
The RS-150BA-N operates as a manual-on sensor. Users must press the on/off pushbutton to turn on lighting. The RS-150BA-N employs PIR technology to sense the difference between the infrared energy from a person in motion and the background space. It keeps lighting on as long as motion is detected and provides automatic shutoff, following a 30-minute time delay, when motion is no longer detected. Users may turn the lighting off manually.
The integral nightlight helps preserve night vision by providing low-level illumination when the connected lighting is off. The nightlight uses energy-efficient LEDs. Check out Wattstopper DLM products here.
- Complies with 2011 NEC requirements
- Replaces single-pole switches
- Fixed 30-minute time delay; no adjustment necessary
- Amber LED nightlight illuminates whenever connected load is off
- Lighted switch for visibility in darkened rooms
- Low-profile styling
- Choice of five decorator colors; lens is color-matched todevice
- Operates most common types of lighting or fan motors
- Relay-based switching
- No current leakage to load in off mode for safety
- Compatible with decorator wall plates
- CA Title 24 compliant
WS-Cutsheet-RS-150BA-N-PIR-Wall-Switch-Vacancy-Sensor
- 120 VAC, 60 Hz; neutral required
- Load ratings: 0-600W incandescent, LED, fluorescent, compact fluorescent (CFL), magnetic low voltage (MLV) or electronic low voltage (ELV) or 1/6 hp motor
- Fixed time delay: 30 minutes
- PIR coverage: 180°, 600 ft² (56 m²)
- 2.63” x 1.69” x 1.88” (67.8mm x 42.9mm x 47.8mm) L x W x D
- Operating conditions: 32-131°F (0-55°C), 95% RH, non-condensing; for indoor use only
- UL and cUL listed
- Five-year warranty
NON VERIFIED CONTENT
Related Products
-
MA-R-277- COMPANION DIMMER 277V
277 V COMPANION DIMMER – BY LUTRON
-
MA-L3L3-XX – MAESTRO INCANDESCENT / HALOGEN DUAL DIMMER / SWITCH
Maestro Incandescent/halogen dimmer Dual Dimmers from Lutron.
-
MA-T51MN-XX – MAESTRO MULTI-LOCATION/SINGLE-POLE TIMER
Maestro Multi-location/single-pole Timer from Lutron.
-
PD-6ANS-XX – CASÉTA WIRELESS IN-WALL NEUTRAL WIRE SWITCH 6A
Caséta Wireless In-Wall Neutral wire Switch 6 A from Lutron.
-
RR-T5RL-XX – RadioRA 2 TABLETOP DESIGNER KEYPAD
RadioRA 2 TABLETOP DESIGNER KEYPAD 5 BUTTON WITH RAISE / LOWER, ALL ON AND ALL OFF – BY LUTRON
-
RR-VCRX-WH – RadioRA 2 VISOR CONTROL RECEIVER
VISOR CONTROL RECEIVER CAN BE USED WITH UP TO TEN (10) TRANSMITTERS (LR-3B-H-SW: VISOR CONTROL TRANSMITTER (SOLD SEPARATELY)) FOR MOBILE REMOTE CONTROL OF LIGHTS, SHADES, DRAPERIES, ETC. – BY LUTRON
-
RRD-W1RLD-XX – RadioRA 2 WALL-MOUNT DESIGNER KEYPAD
RadioRAR 2 WALL-MOUNT DUAL GROUP DESIGNER KEYPAD WITH RAISE / LOWER USED TO OPERATE LIGHTS, SHADES /DRAPERIES, MOTORIZED SCREENS, AND MANY OTHER DEVICES – BY LUTRON
-
RRD-W3BRL-XX – RadioRA 2 WALL-MOUNT DESIGNER KEYPAD
RadioRAR 2 WALL-MOUNT 3-BUTTON DESIGNER KEYPAD WITH RAISE / LOWER USED TO OPERATE LIGHTS, SHADES /DRAPERIES, MOTORIZED SCREENS, AND MANY OTHER DEVICES – BY LUTRON
-
RRD-W4S-XX – RadioRA 2 WALL-MOUNT DESIGNER KEYPAD
RadioRAR 2 WALL-MOUNT 4-BUTTON DESIGNER KEYPAD WITH RAISE / LOWER USED TO OPERATE LIGHTS, SHADES / DRAPERIES, MOTORIZED SCREENS, AND MANY OTHER DEVICES – BY LUTRON
-
RRD-W5BRL-XX – RadioRA 2 WALL-MOUNT DESIGNER KEYPAD
RadioRAR 2 WALL-MOUNT 5-BUTTON DESIGNER KEYPAD WITH RAISE / LOWER USED TO OPERATE LIGHTS, SHADES / DRAPERIES, MOTORIZED SCREENS, AND MANY OTHER DEVICES – BY LUTRON
