- Reviews (0)
- NON VERIFIED
This is the RadioRA 2 tabletop designer keypad. RadioRA® 2 Tabletop Designer Keypads provide homeowners with a simple and elegant way to operate lights, shade / draperies, motorized screens, and many other devices. RadioRA® 2 Keypads feature large, easy-to-use buttons, plus a unique backlit engraving option that makes the Keypads readable any time of the day or night. The Keypad buttons are rounded, allowing engraving to be displayed at an upward angle, increasing readability. The versatile design of RadioRA® 2 Tabletop Designer Keypads allows them to be mounted on a wall, placed on top of a table, or used as a cordless Keypad. The Keypads can be powered by a DC adapter (see Low-Voltage Transformer spec P/N 369561, included with -RR models) or with 2 AAA batteries. Check out the RadioRA 2 products page here.
- At the press of a single button, lights fade ON or OFF to desired levels and shades / draperies open or close to desired positions.
- Light levels and shade / drapery positions can be fi ne-tuned by pressing and holding the raise / lower buttons.
- Programmable to select whole-house or single room preset levels or positions.
- Adjustable backlight intensity. Design Features
- Prepaid engraving included. Redeemable for one engraved button kit.
- Two “Wake-up” options for cordless operation: — “Wake-up and Activate” (default) – Single button press will “wake up” and activate selected button. — “Wake-up Only” – Single button press will “wake-up” and show status. Subsequent press will activate button.
- 9 VDC at 300 mA
Only logged in customers who have purchased this product may leave a review.
NON VERIFIED CONTENT
MRF2-600M-XX – 600W INCANDESCENT DIMMER 120V0 out of 5
THE MAESTRO WIRELESS® SOLUTION PROVIDES DIMMING/SWITCHING OF MULTIPLE LOAD TYPES, OCCUPANCY/VACANCY SENSING, DAYLIGHT HARVESTING, AND HIGH-END TRIM BY LUTRON
RMJ-5R-DV-B – POWPAK RELAY MODULE WITH SOFTSWITCH0 out of 5
COMMUNICATION WITH RF INPUT DEVICES, SUCH AS PICO® CONTROLS AND RADIO POWR SAVRTM SENSORS, IS ACCOMPLISHED USING LUTRON® CLEAR CONNECT® RF TECHNOLOGY – BY LUTRON
LRF2-OWLB-P-WH – 180° Wall-Mount Occupancy/Vacancy Sensor0 out of 5
WIRELESS OCCUPANCY/VACANCY SENSOR HAS 2 SETTINGS AVAILABLE: AUTO-ON/AUTO-OFF, AND MANUAL-ON/AUTO-OFF – BY LUTRON
LRF2-VKLB-P-WH – 90° CORNER-MOUNT VACANCY SENSOR0 out of 5
VACANCY MODEL MEETS CA TITLE 24 REQUIREMENTS – BY LUTRON
L-CMDPIRKIT – TEN (10) TEMPORARY MOUNTING STRIPS0 out of 5
TEMPORARY MOUNTING STRIPS FOR SENSOR MODELS: LRF -OCR2B-P-WH & LRF2-VCR2B-P-WH – BY LUTRON
L-CRMK-WH – RECESS-MOUNTING RING0 out of 5
RECESS-MOUNTING RING FOR SENSOR MODELS: LRF -OCR2B-P-WH & LRF2-VCR2B-P-WH – BY LUTRON
MRF2-15APS – MAESTRO WIRELESS PLUG-IN APPLIANCE MODULE w/ 1 or 3 RECEPTACLE OPTIONS0 out of 5
MAESTRO MODULE MAY BE USED WITH, BUT IS NOT LIMITED TO, THE FOLLOWING: TASK LIGHTING, MONITORS, PRINTERS, FANS, TELEVISIONS, POWERED SPEAKERS, AUDIO EQUIPMENT, RECEIVERS – BY LUTRON
RR-MAIN-REP-WH – RadioRA 2 MAIN REPEATER0 out of 5
RadioRA® MAIN REPEATER WILL EXTEND THE RANGE OF RADIO FREQUENCY (RF) SIGNALS THAT ARE SENT BETWEEN DEVICES – BY LUTRON
RR-15APS-1-XX – RadioRA 2 RF PLUGIN APPLIANCE MODULE0 out of 5
RadioRA 2 RF PLUG-IN APPLIANCE MODULE SWITCHES UP TO 15A OF GENERAL PURPOSE LOADS – BY LUTRON
RR-3PD-1-XX – RadioRA 2 RF PLUGIN DIMMING MODULE0 out of 5
RadioRA 2 RF PLUG-IN DIMMING MODULE DESIGNED TO DIM ONE INCANDESCENT, MAGNETIC LOW-VOLTAGE, OR TUNGSTEN HALOGEN TABLE OR FLOOR LAMP – BY LUTRON