EORS 100 SERIES – SELF-POWERED RF REMOTE SWITCHES
SELF-POWERED REMOTE SWITCHES ARE IDEAL FOR RETROFIT APPLICATIONS WHERE REWIRING IS PROHIBITIVE. PAIRED WITH RF WALL SWITCHES AND WIRELESS OCCUPANCY SENSORS, EORS-100 REMOTE SWITCHES ARE PERFECT FOR RETROFITING SMALL CONFERENCE ROOMS, PRIVATE OFFICES, EXECUTIVES OFFICE, HALLWAYS AND STORAGE ROOMS – BY WATTSTOPPER
- Description
- SPECS
- MANUAL
- Please visit literite.com for our new store!
- NON VERIFIED
Description
This is the self-powered RF remote switches. EORS-100 Series remote switches provide wireless remote control of lighting loads wired to EOSW-100 Series RF Wall Switches. They do not require any electrical connections or any batteries for operation. Models are available with one or two control buttons in a single-gang device. Prior to use, each control button on an EORS-100 remote switch must be paired with selected load(s). The remote switches operate using kinetic energy generated when a user pushes a control button. The button action transmits an RF signal to the paired RF Wall Switch(es) connected to the controlled load(s) to toggle the load(s) on or off. Check out Wattstopper DLM products here.
- Remote switches work with EOSW-100 RF wall switches
- Provide multi-way control without wires
- Self powered switches do not require batteries
- Compatible with decorator wall plates
WS-Cutsheet-EORS-100-Series-Self-powered-RF
- Self-powered when switch is pressed
- 1 or 2 control buttons
- Pair with RF Wall Switch(es)
- Frequency: 902 MHz, integrated whip antenna
- Operating conditions: for indoor use only; 32-104°F (0-40°C); 5-95% RH, non-condensing
- UL and cUL listed
- FCC part 15 compliant
- Five-year warranty
NON VERIFIED CONTENT
Related Products
-
WattStopper LMRC-100 SERIES DIGITAL SWITCHING ROOM CONTROLLER
ROOM CONTROLLERS ARE IDEAL FOR SINGLE OR MULTIPLE ZONE ON/OFF LIGHTING CONTROL APPLICATIONS. THE LMRC-101 HELPS SPECIFIERS COMPLY WITH BASIC ASHRAE 90.1 REQUIREMENTS, WHILE THE LMRC-102 IS DESIGNED FOR BI-LEVEL SWITCHING IN IECC, EPAct, CALIFORNIA TITLE 24 OR LEED PROJECTS BY WATTSTOPPER
-
LMPL-101 – DIGITAL PLUG LOAD ROOM CONTROLLER
CONTROLLER ENSURES THAT ENERGY IS NOT WASTED WHEN PORTABLE LOADS ARE PLUGGED IN. IDEAL FOR USE WITH NON-ESSENTIAL EQUIPMENT IN PRIVATE AND OPEN OFFICES, LUNCH ROOMS AND BREAK ROOMS – BY WATTSTOPPER
-
WattStopper ELCU-200 EMERGENCY LIGHTING CONTROL UNIT
DESIGNED TO CONTROL LIGHTING IN AREAS WHERE EMERGENCY LIGHTING FIXTURES ARE CONNECTED ON DEDICATED EMERGENCY LIGHTING CIRCUITS THAT ARE TYPICALLY ON 24 HOURS PER DAY – BY WATTSTOPPER
-
WattStopper LMZC-301 – ZONE CONTROLLER
ZONE CONTROLLER IDEAL FOR APPLICATIONS WITH A LARGE NUMBER OF DLM FIXTURE CONTROLLERS – FROM WATTSTOPPER
-
LMPC-100 – PIR CEILING MOUNT OCCUPANCY SENSOR
THE LMPC-100 SENSORS, WITH DIFFERENT LENSES FOR DIFFERENT SPACES, ARE IDEAL FOR HIGH AND LOW CEILING AREAS – BY WATTSTOPPER
-
WattStopper LMPL-201 – PLUG LOAD CONTROLLER
PLUG LOAD CONTROLLERS SHOULD BE INSTALLED TO SWITCH OUTLETS USED FOR TASK LIGHTING AND NON-ESSENTIAL EQUIPMENT IN OFFICES, LUNCH ROOMS AND BREAK ROOMS AND OTHER AREAS IN COMMERCIAL BUILDINGS.
-
WattStopper WRC-15/20 AMP WIRELESS RECEPTACLE CONTROL
WIRELESS RECEPTACLE CONTROLS PROVIDE EASY-TO-INSTALL CODE COMPLIANT CONTROL FOR PLUG LOADS IN DLM CONTROLLED ROOMS INCLUDING PRIVATE OFFICES, CONFERENCE ROOMS, COPY ROOMS AND COMPUTER CLASSROOMS WHERE THE DESIGN INTENT IS TO HAVE ALL CONTROLLED RECEPTACLES TURN ON AND OFF IN RESPONSE TO ALL CONNECTED OCCUPANCY SENSORS BY WATTSTOPPER
-
WattStopper LMCP8 8 RELAY LIGHTING CONTROL PANEL
8 RELAYS LIGHTING CONTROL PANEL – BY WATTSTOPPER
-
WattStopper LMRH-101 DIMMING IR REMOTE CONTROL
DIMMING IR REMOTE CONTROL – BY WATTSTOPPER
-
WattStopper LMLS-600 DUAL LOOP SWITCHING & DIMMING PHOTOSENSOR
DUAL LOOP SWITCHING AND DIMMING PHOTOSENSOR – BY WATTSTOPPER
